Product / Services
Post Buy Requirement
H&
H & T Engineers
Saharanpur, Uttar Pradesh, India
Add Review
Call Now

Our Products

  1. Emergency Medical Equipment 6 Products available
  2. Bathroom Shower 3 Products available
  3. Others 25 Products available

Bathroom Shower #3678936

Oscillating Showers

Oscillating Showers
We are a prominent Manufacturer of a wide array of Oscillating Showers that is in huge demand in the market. Oscillating Showers are high pressure Showers that are used for cleaning felt or wire so that smooth running of the machine can be assured. The oscillation is provided either by pneumatic or electro-mechanical method.



Electro Mechanical Drive
In this type of shower, oscillation is provided by a geared electric motor, crank and shaft drive. The stroke length of the shower is 110-150mm, but can be changed. Minimum number of oscillations is 20 per minute but can be more if needed. Crank & shaft drive are usually covered with M.S. Sheet but can be supplied in Stainless Steel if desired. Shaft is supported on brass roller. The standard distance between two nozzles has been kept at 100 mm which can be altered as per the application.

Micro Travel Drive
For meticulous, uniform cleaning of the entire area of the felt or wire H & T offers its top-most model MICRO TRAVEL NEEDLE JET SHOWER. It does its cleaning operation with unmatched thoroughness. High Pressure Oscillating Showers of traditional design tend to leave diamond shapes of cleanedun-cleaned and over cleaned portions on the felt or wire. However, micro-travel Mechanism of this shower eliminates this inherent weakness and ensures that uniformly spaced nozzles cover the area between any two of them by travelling at predetermined suitable speed depending upon machine's speed. This micro-travel to and fro movement is caused by an electric double geared motor and crank drive. The standard distance between two nozzles has been kept at 100 mm, but can be reduced - if so desired by the client. However, Pump of higher capacity would be needed to maintain same pressure for greater number of nozzles. With micro travel drive, the supplied dome shaped needle jet nozzles have Nylon brush to keep the nozzles clean. The brush is to be rotated manually to clean the nozzle as and when required.

Materials of Construction :
  • Shower Bar in SS 304 SS 316
  • Oscillator with Geared Drive
  • Fresh Water Filter in SS 304SS 316
  • Shower Mounting Brackets in SS304SS 316 with Brass Rollers

    • Your Requirement for Showers :
      • WireScreen Width
      • Machine Frame Centre Distance
      • Type of Oscillator Required
      • Shower Required with Brush Cleaning System
    View Complete Details
    Ask Latest Price & Details
    Stationary Showers

    Stationary Showers
    Stationary Showers are fabricated completely in Stainless Steel. These showers are put to various uses e.g. Fan Jet Showers for foam killing action in the head box, Fish Tail Showers for cleaning the wire returning rolls, etc. The Stationary Showers can be availed at the most affordable prices from us.



    Applications :
    • Cleans the wire returning rolls
    • Foam killing action in the head box
      View Complete Details
      Ask Latest Price & Details
      Starch Shower

      Starch Shower
      The Starch Spray System is designed as an answer to improve the bursting factor of paper. Indian Paper Mills, Kraft Paper Mills and Corrugated Container manufacturers have traditionally had access to inexpensive virgin fiber that could be mixed with hardwood or softwood to reach required strength. That has changed in recent years, with increasing dependence on recycled fiber sources, especially for liner board and medium grades.

      However, as the fibers are recycled, they get shorter and weaker which results in a lower grade product with less final sheet strength. Synthetic additives to enhance product strength have often been prohibitively expensive in a marketplace where profit margins have been ravaged by declining paper prices.

      Now, a cost-effective starch spray solution has emerged in India that is designed to boost paper strength (up to 100% in IGT, 25% in Concora, and 20% in CFC and Mullen) while cutting fiber use by replacing much of the fiber with starch.

      Principle Of System :
      Essentially, special Spray Nozzles apply an unmodified starch suspension to the fiber web of paper products to increase their internal strength and improve their surface properties. The starch stays internally on formed sheets and gelatinizes while drying. In its Starch Spraying System, processed water mixes with starch to create slurry that flows into a run tank, which is sprayed onto the sheet former.

      The process of Starch Spray is based on the principle that the starch solution is sprayed through a spray bar over the wire section where it discharges starch on the paper. Maximum retention, of up to 80%, of starch takes place so that the bursting factor of the paper gets improved. It is achieved at the point where the dryness of the paper starts. The Solution used is generally 30gpl. However, it may change according to process requirements.

      Design :
      H & T Starch Spray System consists mainly of a two tanks for the preparation of starch solution. It is then transferred to Nozzles attached on a shower pipe over the machine through end suction centrifugal pump operated by a motor. The Starch Solution also passes through Stainless Steel Duplex Water Filter. There is also a provision to add fresh water and to bypass the excess starch solution back to the tank in case it is not used.
      • Tanks : Preparation and Service Tank along with Agitator and Motor.
      • Pump : End Suction Centrifugal Pump.
      • Motor : 10 HP, 3-phase, Frequency 50 or 60 Hz.
      • Filters : SS 304 Duplex Quick Release Filters
      • Spray Pipe : With Fish Tail Nozzles to cover complete Paper width or Mould width
      • Linear, Angular & Vertical Positioner : Positioners ensure spray at the correct point so that maximum benefits can be achieved.
      • Angular movement is caused by a gear box.
      • Vertical Movement is caused by a wheel through spindle and nut.
      • Horizontal Movement along the machine direction is through a slotted channel.

        • Your Requirement for Starch Spray System :
          • Location - Wire Mould
          • WireMould Face Width
          • Machine Frame Centre Distance
          • Frame Width
        View Complete Details
        Ask Latest Price & Details
        Tell Us What are you looking for? Will call you back

        Contact Us

        • Anshul Aggarwal (H & T Engineers)
        • Kamdhenu Complex, Link Janta Road, Mahipura, Saharanpur, Uttar Pradesh - 247001
        • Share us via
          Linkedin pinterest
        View Contact No.
        Retailer of Bathroom Shower from Saharanpur, Uttar Pradesh by H & T Engineers
        Product / Services
        H&
        H & T Engineers
        Saharanpur, Uttar Pradesh, India
        Add Review
        Call Now

        Our Products

        1. Bathroom Shower 3 Products available
        2. Emergency Medical Equipment 6 Products available
        3. Others 25 Products available

        Bathroom Shower #3678936

        Oscillating Showers

        Oscillating Showers
        We are a prominent Manufacturer of a wide array of Oscillating Showers that is in huge demand in the market. Oscillating Showers are high pressure Showers that are used for cleaning felt or wire so that smooth running of the machine can be assured. The oscillation is provided either by pneumatic or electro-mechanical method. Electro Mechanical DriveIn this type of shower, oscillation is provided by a geared electric motor, crank and shaft drive. The stroke length of the shower is 110-150mm, but can be changed. Minimum number of oscillations is 20 per minute but can be more if needed. Crank & shaft drive are usually covered with M.S. Sheet but can be supplied in Stainless Steel if desired. Shaft is supported on brass roller. The standard distance between two nozzles has been kept at 100 mm which can be altered as per the application. Micro Travel DriveFor meticulous, uniform cleaning of the entire area of the felt or wire H & T offers its top-most model MICRO TRAVEL NEEDLE JET SHOWER. It does its cleaning operation with unmatched thoroughness. High Pressure Oscillating Showers of traditional design tend to leave diamond shapes of cleanedun-cleaned and over cleaned portions on the felt or wire. However, micro-travel Mechanism of this shower eliminates this inherent weakness and ensures that uniformly spaced nozzles cover the area between any two of them by travelling at predetermined suitable speed depending upon machine's speed. This micro-travel to and fro movement is caused by an electric double geared motor and crank drive. The standard distance between two nozzles has been kept at 100 mm, but can be reduced - if so desired by the client. However, Pump of higher capacity would be needed to maintain same pressure for greater number of nozzles. With micro travel drive, the supplied dome shaped needle jet nozzles have Nylon brush to keep the nozzles clean. The brush is to be rotated manually to clean the nozzle as and when required. Materials of Construction :
        • Shower Bar in SS 304 SS 316
        • Oscillator with Geared Drive
        • Fresh Water Filter in SS 304SS 316
        • Shower Mounting Brackets in SS304SS 316 with Brass Rollers
          • Your Requirement for Showers :
            • WireScreen Width
            • Machine Frame Centre Distance
            • Type of Oscillator Required
            • Shower Required with Brush Cleaning System
        View Complete Details
        Ask Latest Price & Details
        Stationary Showers

        Stationary Showers
        Stationary Showers are fabricated completely in Stainless Steel. These showers are put to various uses e.g. Fan Jet Showers for foam killing action in the head box, Fish Tail Showers for cleaning the wire returning rolls, etc. The Stationary Showers can be availed at the most affordable prices from us. Applications :
        • Cleans the wire returning rolls
        • Foam killing action in the head box
        View Complete Details
        Ask Latest Price & Details
        Starch Shower

        Starch Shower
        The Starch Spray System is designed as an answer to improve the bursting factor of paper. Indian Paper Mills, Kraft Paper Mills and Corrugated Container manufacturers have traditionally had access to inexpensive virgin fiber that could be mixed with hardwood or softwood to reach required strength. That has changed in recent years, with increasing dependence on recycled fiber sources, especially for liner board and medium grades. However, as the fibers are recycled, they get shorter and weaker which results in a lower grade product with less final sheet strength. Synthetic additives to enhance product strength have often been prohibitively expensive in a marketplace where profit margins have been ravaged by declining paper prices. Now, a cost-effective starch spray solution has emerged in India that is designed to boost paper strength (up to 100% in IGT, 25% in Concora, and 20% in CFC and Mullen) while cutting fiber use by replacing much of the fiber with starch. Principle Of System :Essentially, special Spray Nozzles apply an unmodified starch suspension to the fiber web of paper products to increase their internal strength and improve their surface properties. The starch stays internally on formed sheets and gelatinizes while drying. In its Starch Spraying System, processed water mixes with starch to create slurry that flows into a run tank, which is sprayed onto the sheet former. The process of Starch Spray is based on the principle that the starch solution is sprayed through a spray bar over the wire section where it discharges starch on the paper. Maximum retention, of up to 80%, of starch takes place so that the bursting factor of the paper gets improved. It is achieved at the point where the dryness of the paper starts. The Solution used is generally 30gpl. However, it may change according to process requirements. Design :H & T Starch Spray System consists mainly of a two tanks for the preparation of starch solution. It is then transferred to Nozzles attached on a shower pipe over the machine through end suction centrifugal pump operated by a motor. The Starch Solution also passes through Stainless Steel Duplex Water Filter. There is also a provision to add fresh water and to bypass the excess starch solution back to the tank in case it is not used.
        • Tanks : Preparation and Service Tank along with Agitator and Motor.
        • Pump : End Suction Centrifugal Pump.
        • Motor : 10 HP, 3-phase, Frequency 50 or 60 Hz.
        • Filters : SS 304 Duplex Quick Release Filters
        • Spray Pipe : With Fish Tail Nozzles to cover complete Paper width or Mould width
        • Linear, Angular & Vertical Positioner : Positioners ensure spray at the correct point so that maximum benefits can be achieved.
        • Angular movement is caused by a gear box.
        • Vertical Movement is caused by a wheel through spindle and nut.
        • Horizontal Movement along the machine direction is through a slotted channel.
          • Your Requirement for Starch Spray System :
            • Location - Wire Mould
            • WireMould Face Width
            • Machine Frame Centre Distance
            • Frame Width
        View Complete Details
        Ask Latest Price & Details
        Tell Us What are you looking for? Will call you back

        Contact Us

        • Anshul Aggarwal (H & T Engineers)
        • Kamdhenu Complex, Link Janta Road, Mahipura, Saharanpur, Uttar Pradesh - 247001
        • Share us via
          Linkedin pinterest
        View Contact No.