Our Product / Services
SS Membrane Housings are for continuous, long-term use for reverse osmosis, nano filtration and ultra filtration elements which are used on typical commercial watertreatment systems at pressures up to 250/300 PSI.
SS Membrane Housings accommodate any make of 4" and 8" nominal diameter spiral wound elements
Features |
3041/316L Stainless Steel Construction Welded/ Seamless Housing Body End Entry Single Piece ABS End Plugs High Resistance to Climate Conditions SS TC End Plag |
Integrated Clamping System Buna-N Double 0-Rings for Sealing Integrity Accommodate All Standard Sized Membrane Elements Adapters, Inter connectors and Mounting Clamps Available Range : 4040, 4080, 4021,8040,8080,180120,80120 |
Technical Specifications
|
Bottom hub & Stack Diffuser Models
H2O Veins offers molded distribution systems, designed to be adaptable for any make of FRP tank. Depending on the diameter of the tank, various sizes of laterals can be offered. Our distribution systems have been manufactured using the best engineering materials to ensure maximum life of the product. H2O Veins design team has ensured that these distribution systems are easy to assemble in the tanks and the uniform distribution and collection is ensured.
Caliont Foathres
Suitable for any make of FRP tank.
Various lateral sizes available for different tank sizes.
Unique 1/4 turn cam-lock hub and laterals make assembly and installation easy and secure. Unique slot design assures a uniform, vertical distribution of flow and pressure drop
Specifications
Model Descriptions Stack Diffuser Type |
Tank Size 14" - 30" |
Maximum Flow Rate 10 m3/h |
Materials Pipe Conection PVC, EPDM, ABS, PP |
Top or Bottom Mountable |
|
|
2"NPT(F)/ 2" SOCKET |
Bottom Hub Type |
16" - 36" |
15 m3/h |
PVC, EPDM, ABS, PP |
Bottom Hub with 6 Laterals |
|
|
2"NPT(F)/ 2" SOCKET |
Bottom Hub & Diffuser Type |
24" - 42" |
25 m3/h |
PVC, EPDM, ABS, PP |
Bottom Hub with 6 Laterals & Diffuser |
|
|
2"NPT(F)/ 2" SOCKET |
Bottom Hub Type |
42" / 48" |
40 m3/h |
PVC, EPDM, ABS, PP |
Bottom Hub with 12 Laterals |
|
|
2"NPT(F)/ 2" SOCKET |
FEATURES
Activat Model : 1-1, 1-3, 3-3, 11ECO, STP, ETP, UV Gold microprocessor based panels are ideally suited for small and medium sized RO plants.
OTHER APPLICATIONS
TECHNICAL SPECIFICATIONS
Panel Configuration | 11MP | 13MP | 33MP | 11ECO | 11ECO Gold |
Display |
LCD | LCD | LCD |
LED |
|
Raw water pump | 2 HP single 0 | 2 HP single 0 | 5 HP three 0 | 2 HP single 0 | 2 HP single 0 |
High water pump | 2 HP single 0 | 5 HP three 0 | 5 HP three 0 | 2 HP single 0 | 2 HP single 0 |
Transfer Pump | NA | NA | NA | NA | |
Dimensions | 225Hx250W | 225Hx250W | 225Hx250W | ||
Cut out size | 185Hx215W | 185Hx215W | 185Hx215W | ||
Conductivity | Available | Available | Available | Available |
Solenoid valve type: Normally Closed (NC) type 230—ACV: Clients scope Note: Higher HP optional. |
application & industries
i reverse osmosis (ro)
i industrial circulation systems
i industrial & domestic water supply
pressure boosting and distribution
process technologies
metallurgy
cast iron -aisi 431 -ss (304/316l) -tungsten carbide -thermoplastic -
option & features
Technical Specification
Technical Specification
MEMBRANE |
MAX |
MAX |
QUALITY |
BURST |
ELEMENT |
FILTER HOUSING |
OPERATING |
OPERATING |
CONTROL |
PRESSURE |
LENGTH |
MODEL NO. |
PRESSURE |
TEMPERATURE |
TEST PRESSURE |
|
|
Q-40E-300 |
3001351(20Bar) |
49°C (120°F) |
450PSI (31Bar) |
1500PSI (103Bar) |
1- 6 |
Q-40E-450 |
450PS1 (31Bar) |
49°C (120°F) |
675PSI (47Bar) |
2250PS1 (155Bar) |
1- 6 |
Q-40E-600 |
600PSI (41Bar) |
49°C (120°F) |
900PSI (62Bar) |
3000PSI (207Bar) |
1- 6 |
Q-40E-1000 |
1000PSI (41Bar) |
49°C (120°F) |
1500PSI (103Bar) |
5000PSI (345Bar) |
1- 6 |
Environmentally friendly disinfection for liquids with low UV transmittance
ADVANTAGES
Max. Disinfection performance at low UV transmittance.Effective, environmentally friendly inactivation of harmful bacteria, viruses, yeasts and parasites.No toxic by-products.Compact design.Superior UV lamp technology.Automatic quartz sleeve wiping system available.Continuous system monitoring using a highly selective calibrated UV sensor
The HS series fulfils all the requirements for safe, economical and environmentally friendly disinfection of liquids with low UV transmittance:
Waste water/ grey water.
Drinking water.
Process water.
Sugar syrup.
Technical Specification | Model UV-HS01 | Model UV-HSI:14 | Model UV-HSO6 |
Flow rate |
1.5 m3/h or 3 m3/h |
6m3/h or 12m3/h |
9 m3/h or 18m3/h |
Unit wattage |
36w or 90w |
144w or 360w |
216w or 540w |
Lamps |
1 x 36w or 1 x 90w |
4 x 36w or 4 x 90w |
6 x 36w or 6 x 90w |
Quartz sleeve |
1 Nos. |
4 Nos. |
6 Nos. |
Inlet/outlet port size |
40mm |
50mm |
50mm |
Length |
1050mm |
1000mm |
1000mm |
Unit Width |
120mm |
230mm |
280mm |
Height |
180mm |
230mm |
300mm |
Chamber Inner Diameter |
72mm |
148mm |
198mm |
Casing stainless steel |
316L |
316L |
316L |
Voltage |
220-240 v |
220-240 v |
220-240 v |
Max operating pressure |
75 psi |
75 psi |
75 psi |
TECHNICAL DETAILS:
4. PACKING :Each clamp with individual Packing
We can also make as per your technical requirement. We will satisfy you with our business ethics and our quality products.
Demineralised Water systems produces high quality water free from any kind of minerals. It operates on the principle of ion exchange, degasification and polishing for treating water and removing ions. Demineralization technology is one of the cost effective solutions for treatment of water. These systems are widely used to treat water in the field of steam, power, process, and cooling.
After the exchange, the quality of water is as follows:
Cation quality - less than 10 Micro siemens per centimeters
7.5 to 8.5 pH
Used as a polishing unit, the mixed bed has less than
1 micro siemens quality
Keeping the diverse requirements of customers in mind, we are instrumental in providing FRP RO Plant. The presented product is made using quality assured component that is acquired from specialized sources of the industry in line with industry principles. Furthermore, this product is inspected against numerous quality limitations in order to make sure its quality.
Allowed pressure for source water: 0.1-0.3Mpa
Work temperature: 5-40? Max of original water
TDS: 1000ppm
Output: 100-400G/Day
Flush Type: Auto flush
Fitting: Common fitting or quick connect fitting
Industrial reverse osmosis system plant is best suited for small and large scale industries. This type of reverse osmosis plant can be configured easily as per the individual requirements of output water. It produces high-quality demineralised water for various industrial applications. A systematic programme is integrated in the plant for studying the chemistry of water. Depending upon the contamination level of water, the RO plant itself selects the most suitable membrane configuration to provide a plant which gives a low water-rejection rate.
50 to 2000 Liter per Hour capacity
Output TDS: 10-50 ppm
(Input water with TDS levels under 600 ppm)
Pressure: 20 psi 60 psi
Free Chlorine:
A mixed bed exchange has both cation and anion resin mixed together in a single vessel. As water flows through the resin bed, the ion exchange process is repeated many times, polishing the water to a very high purity. During regeneration, the resin is separated into distinct cation and anion fractions. The resin is separated by back washing, with the lighter anion resin settling on top of the cation resin. Regenerate acid is introduced through the bottom distributor, and caustic is introduced through distributors above the resin bed. The regenerate streams meet at the boundary between the cation and anion resin and discharge through a collector located at the resin interface. Following regenerate introduction and displacement rinse, air and water are used to mix the resins. Then the resins are rinsed, and the unit is ready for service.
Counter flow and mixed bed systems produce a purer water than conventional cation-anion demineralizers, but require more sophisticated equipment and have a higher initial cost. The more complicated regeneration sequences require closer operator attention than standard systems. This is especially true for a mixed bed unit.
After the exchange, the quality of water is as follows:
Cation quality - less than 10 Micro siemens per centimeters
7.5 to 8.5 pH
Used as a polishing unit, the mixed bed has less than
1 micro siemens quality
Pressure Sand Filter is used for removal of suspended solids & turbidity from Water & Wastewater. We, at H20 offer Series of filters at a low cost, reliable and efficient way to filter your water.
Our unique design of Pressure Sand filter ensures the maximum utilization of the surface area, lesser pressure drop across the filter bed and effective removal of the impurities.
H20 Filters are available in diameters from 0.225 Mts. to 4.0 Mts.(vertically) and in length from 3.0 Mts. mm to 11 Mts. (Horizontally) with flow rates up to 350M3/Hr. these rugged, pre-engineered, pre-assembled units minimize installation and start-up costs. Whether you require Ro feed process water or filtered water, H20 can fulfill applications requirement
Simple design maximizes reliability and efficiency
Filtration rating up to 20 40 Microns
Standard and effective quartz sand media.
Low Pressure drop across the vessel
FRP, MSRL, MSEP & SS Vessels are available.
Manual, Semi-Automatic and Automatic features are provided
Pre-assembled construction minimizes start-up time and installation costs
Structural steel legs provide rigid support of vessel for safety
Air scouring available for high flow pressure vessel.
Proven design of internal distribution and collection system.
Clarification is the process to remove suspended solids from water which is done by Clarifier. It is the economical and an essential part of effluent treatment plants and other raw water treatment plants. Depending upon the plant, the clarifiers are available in wide varieties of shapes. In large scale wastewater treatment facilities, large circular open-air clarifiers are preferred.
We have been able to offer a broad range of Water Softener. The given product finds its application in both domestic and commercial sectors and is widely used to convert hard, undrinkable water into clean potable water. Our skilled professionals utilize best quality components and advanced technology which is in compliance with the industrial norms to design these water softeners. Our products are also checked on several pre-defined parameters to ensure their flawlessness. Further, customers can get these at a rock-bottom price.
SS RO Plants to our clients, which is manufactured using quality grade raw material and components. Our team of experts manufacture these plants in line with the industry accepted norms of quality and standards. These RO Plants are as per the specific requirements of the end use of mineral water and applications vary from using it for treating it for safe drinking water, pharmaceutical industry and other industry where pure mineral water is the key ingredient for the manufacture of end product.
We bring Swimming Pool Filter System, a Swimming Pool Filter System that keeps the water of your swimming pool, hygienic, comfortable and enjoyable. We ensure that you receive the Swimming Pool Filter System solution that works best in terms of quality, compliance and cost. All systems are built with an exclusive modular design that allows for quick and simple inspection and cleaning of cells. These system allow for simple in field removal and re-installation of individual components without having to call for the services of an electrician or plumber.
FEATURES
Sturdiness
Durable finish standards
Long operational life
Ultrafiltration Plant is used in both pretreatment and post treatment of water. At Bionics Advanced Filtration Systems, we manufacture and install custom made ultrafiltration Water systems (UF Systems) up to 100m3/hr, units can be semi or fully programmable and PLC controlled. These are extensively used in industrial water and wastewater treatment applications. These units are next generation equipment, designed to minimize investment cost and maximize performance meeting stringent environmental protection requirements.
Water Treatment System finds application in meeting the demands of effective filtration of impurities as well as chemicals that are present in water and thus restoring the water quality standards and make it fit for particular usage in given applications. With the systems designed and developed as per defined industry norms, these are also known for easy installation as well as availability in customized finish sizes as demanded by the customers.
Effluent treatment systems are widely used for recycling of wastewater in industries in order to reduce the demand of water. This type of system uses physical, chemical, biological and membrane processes for treating the effluents before being discharged into the water. The effluent system is provided with all the requisite features that assist in achieving zero-discharge standards laid by statutory authority.
Flow rate: 1140m3/hr
Suspended matter: 6000ppm
pH: 45.-6.5
Temperature: 60-70 degree Celsius
The inlet channel is designed for a surge flow of 1950m3/ hr
at the slope of 2% so that water flows at the rate of 1.5m/sec.