Laboratory Equipments #2113432

Being a prominent Manufacturer, Supplier and Exporter in the industry, we present a wide range of Laboratory Water Bath to our customers. The quality we offer is unmatched. We take special care of quality by matching it against the highest parameters of quality set by the industry. We provide it in safe packaging at affordable rates. The range of offer enjoys a long life and lustrous design.

Details :

• This water baths are ideal for general purpose application. Bath fluids can be controlled at temperatures as high as 100^oC ( 60^oC without cover) with ± 0.2^o precision and uniformity. Bath temperature can be read from mercury thermometer (included) with a range from -20 to 110^oC. Cover and ring lids are included.
• Digital bath accommodates vessel sizes up to 2000ml and features a digital temperature controller cum timer and low water level indicator with cutoff system.

Features :

• Digital control easy to use.
• Totally unobstructed, crevice free.
• Stainless steel tank - corrosion resistant and easy to clean.
• Sturdy construction - stainless steel 304 inner and outer chamber.
• Standards accessory - concentric ring and steel lid.
• Optional heater cover and low water level alarm.
• ( this flashes on low liquid level. At the same time there is an audible alarm and the heating is switched off automatically.

Riding on our experience in the industry, we, as a Manufacturer, Supplier and Exporter of Digital Incubator have positioned us in the upper echelons of the industry. Our distribution network allows us to facilitate quick and convenient delivery in a matter of time at your doorstep. The corrosion resistance and fine finish of the product make it an interesting proposition. We offer the supreme quality at economical rates.

Details : User-friendly Digital temperature control allows you to repeatedly set operating temperature in the range of ambine + 5^o C to 60^o C. Single program controller with adjustable high – low limit. 2" thick Glasswool insulation between oven chamber and exterioir walls helps minimize heat radiatin to surrounding environment. The drawer-style control panel is protected from spills and esily pulls out for accessibility. Interior chamber is constructed of stainless steel for easy cleaning. Exterior is constructed of mild steel with powder coated finish.

Optional :

• Shelves shall be supplied with above ovens of glavanize wire mesh.
• Shelves made of stainless steel will be supplied at extra cost.
• Air forced circulation fan can be supplied at extra cost for better accuracy.
• We can fabricated any size oven as per customers specification.
• PID  microprocessor temperature controller cum indicator,
• Controller interface through Rs. 232C/Rs 485 for multiple networking.
• IQ, OQ, PQ, DQ and validation.

Laboratory Environmental Test Chambers are designed & fabricated to suit various I.S. Standards application in the growing field of Medical, Agricultural, Industrial, Research Laboratories, Metal Treatment & Various Industries. We are the prominent Humidity Test Chamber Manufacturer, Supplier and Exporter of Humidity Test Chamber from Mumbai, India. Humidity Test Chamber, offered by us, has a cutting-edge technology to challenge & maintain climatic conditions above freezing what so ever & where ever you need. Features :

• Temperature + 10^oC. To 60 ^oC
• Humidity (R.H.) 40% R.H. To 95% R.H.
• LCD display electronic temperature, humidity controller cum data logger with an accuracy of +/-0.50C & +/-3% R.H.
• PT â 100 sensors for dry & wet bulb / Capacitor type for humidity.
• Safety controller for prevent over shoot.
• Hermetically guard compressor and castor wheels for easy move ability.
• ISI mark kettle heater steam injection system and low water level alarm.
• Full Size through acrylic8 mm thick door.
• 1/12 Hp, 1440 RPM Motorized blower for circulation.

Optional : Imported Sensor 0 to 100% R.H. , accuracy of = 2 ^oC Computer interface RS 485 / RS 232 interface for multiple single communication port Optional Accessories :

• Strip Chart Recorder.
• 0 to 24 hrs. Timer and regulating illumination conditions

Note : Guarantee ceased in case of non-use of suitable servo stabilizer & to be stored in A.C. Room. Due to continuous R & D model/specification may change.

BOD Incubator is designed primarily to meet requirement of chemical oxygen demand test equipment are suitable for closed control of incubation temperature. We are a renowned BOD Incubator Manufacturer, Supplier and Exporter from Mumbai, India. We offer these BOD Incubators in varied grades and specifications as per the demand of the clients. Construction :

• The unit is a double walled chamber, with glass wool insulation.
• Interior is made of stainless steel and exterior is mild steel powder coated finish.
• The unit has full-length glass door and outside metal door with magnetic gasker and lock.
• The unit is provided with perforated stainless steel trays.
• The unit consists of main switch, digital microprocessor temperature controller with PT-100 sensor, chamber light.
• Forced air circulation for uniform temperature, safety controller, Hermetically guard compressor and Castor wheels for easy move ability.
• The unit Works on 230 Volts AC and 50 Hz mains supply.

Various Type Of Temperature Controls Offered (Standard Model) :

• Time proportional On/off controller-cum indicator
• Micro controller based PID controller cum indicator.
• Controller with printer interface as optional
• Controller interface through Rs 232 C/RS 485 for multiple networking

Feature (Optional For Gmp / Ich Model) :

• ICH Guide Lines followed.
• S.S. Removable trays.
• HRC fuse for all controls.

Optional Accessories :

• Strip Chart Recorder.
• 0 to 24 hrs Timer for regulating illumination conditions.

Note : Guarantee ceased in case of non-use of suitable servo stabilizer & to be stored in A.C. Room. Due to continuous R & D model/specification may change.

With a vast industrial expertise, we are engaged in Manufacturing, Supplying and Exporting Shaking Incubator. Our Shaker Incubators are designed using the latest technology in our advanced manufacturing unit. Shaking Incubators are made available in various specifications as per the specific industrial purposes. We offer Shaking Incubator at the market leading prices. Application & Features :

• Useful for biological cultures under various temperatures
• Precise temperature control by PID controller
• Door open indication with autostop shaking system
• Analog speed controller with rpm indicator
• Advanced shaking mechanism provides quiet shaking and no vibration & stabilized orbital motion

Harnessing our experience with the state-of-the-art facility, we take the responsibility to deliver utmost quality to the customers. As a Manufacturer, Supplier and Exporter, we offer a range of Laminar Air Flow Station. This range includes different sizes and designs. Our team of expert professionals keeps quality on the top of our priority list. Such quality is offered at affordable rates. Lay your hands on it for economical rates.

Details : This unit is designed to provide an ultra-clean work environment which is free from biological and particulate contamination. Hepa filter having 99.97% efficient @ 0.3% micron [DOP Test] Pre - filter 95% efficient @ 5micron. Suitable motor blowing assembly / lies, working table top side panels, Fluorescent tube light and inbuilt U V tube attachment, pressure differentiate manometer. Laminar air flow are as per US standard 209 E class 100 and Japanese standard JIS B 9920 & 9921. Hepa filters are factory tested with DOP and other relevant test .

Features :

• Stainless Steel table top for CRCA
• Hepa Filter, Pre-filter
• Magnehalic Gauge / Manometer
• LPG gas cock

Hally Bod Incubator designed primarily to meet requirement of Bio Chemical Oxygen Demand test Equipment are suitable for closed control of incubation / storage temperature.

The unit is a double walled chamber, with glass wool insulation. Interior is a made of stainless steel and Exterior is mild steel powder coated finish. The unit has full-length glass door and outside metal door with magnetic gasket and lock. The unit is provided with perforated stainless steel trays.

The unit consist of main switch, digital microprocessor temperature controller with PT-100 sensor, chamber Light. Forced air circulation for uniform temperature, safety controller Hermetically gauged compressor and Caster Wheels for easy move ability. The unit work on 230 Volts AC and 50 Hz mains supply.

VARIOUS TYPE OF TEMPERATURE CONTROLS OFFERED.

Standard Model- time proportional ON/OFF controller cum indicator

Micro controller based PID controller cum indicator.

Controller with Printer Interface as * optional.

Controller Interface through Rs 232C/RS 485 for multiple networking.

TFEATURE (OPTIONAL FOR GMP/ICH MODEL) 

ICH Guide Lines followed.

S.S. removable to prevent over shoot.

Safety thermostat to prevent over shoot.

HRC fuse for all controls.

Bacterilogical incubator are non refrigerated version for temp. Range of ambient + 5°C to 60°C

Supply 230 V +/- 10%, Single Phase, 50Hz, AC.

OPTIONAL ACCESSORIES

• a) Strip chart Recorder. 
• b) Chamber illumination with White flourescnt or U.V. light. 
• c) 0 to 24 hrs. time for regulating illumination conditions. 
• Note:- Guarantee ceased incase of non use of suitable servo stabilizer & to be stored in A.C. room. Due to continues R&D model / specification may change. picture shown with optional accessories. (optional )

Keeping up with the latest trends, we strive to achieve utmost customer satisfaction. We, as a Manufacturer, Supplier and Exporter of Laboratory Oil Bath, deliver immaculate quality to our customers. The raw material used in the manufacturing is of first-rate quality. Our vendors assure us in terms of meeting the standards of quality set by industry. For our valued customers, we make quick delivery at their doorstep.

Details :

• Double wall construction. Inner made of Stainless Steel and external made of mild steel with powder coated finish and Complete made of S.S.304 . The gap between two wall filled with glass wool insulation.
• Temperature range 50^oC to 300^oC controlled by thermostat or microprocessor based PID controller with back light LCD display with Mains On/OFF Switch & two indicator lamps.

Features :

• Cylindrical Bath Shape
• The Heating elements are situated underneath the bath vessel.
• Easy to use PID Controller
• Digital Bock Light LCD Display
• Stainless Steel Bath for superior durability and high thermal efficiency.
• Over Temperature , Sensor Error.
• Storage function for the set values of temperature.