Hans Laser Technology Mumbai, Maharashtra

We are offering laser marking machine. system characters
small and compact size, use common air-cooling system.
fiber output, can apply flexibly, and easy to make 3d processing system.
install backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator, to block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator. function: to extend the longevity of laser oscillator. Laser will form diffuse reflection while marking on the metal object. Part of laser will be reflected to the beam output gap, and enter the laser oscillator through optic path system. This will cause severe damage to the laser oscillator and shorten its longevity. Backward reflecting isolator can block this part of laser effectively to protect the safety of laser oscillator. After installing the backward reflecting isolator, customer can mark in the whole area including the laser central position. Metal material with high reflectivity can be also marked.

We are offering laser welding machines. 2. application suitable for small or medium scale welding. can act on titanium, nickel, stannum, zinc, copper, aluminium, chromium, columbium, gold, silver and their alloy and other metals. 3. machine features  360°rotating of the welding head, facula adjusting by hand-moving.  motic microscope + liquid-crystal light-valve protector.  professional motion control system to achieve 3d moving by the industrial control rocker.  real-time currency feedback system to ensure the stability of the laser power.  industrial touch-screen interface.  data such as laser output power, frequency, impulse width., etc can be adjusted by the touch-screen interface. Set right wavelength to match welding requirement on different materials, so as to achieve the best result.  multiple-degree moving control to support wide application range．  1064nm laser wavelength, human harmless.  small heat-effect area, no distortion and stomata.  can repair crack, burst corner, die edge, and wearing seal edges.  entirely sealed control cabinet and optical path.  theφ80 orφ125 revolving worktable with industrial controller is optional and can be customized.  leica microscope is optional and can be customized.  the ccd monitor system is optional and can be customized.

We are offering laser cutting machine. 6. Requirement of machine environment  humidity 40%-80%; no dew; dehumidifier installation needed.  ambient temperature 15-30℃, air-conditioner needed.  power supply: ac380v；50hz  electric power net undulation: ±5%; power net suited to the international standard. Area with voltage amplitude above 5% should have automatic digital voltage stabilization and steady flow system equipment.  no strong electromagnetism signal interference around the equipment. No wireless injection station (or relay station) around.  groundsill swill: less than 50um；vibration acceleration: less than 0.05g. Avoid too many punches and other machine tool equipments setting around.  no smoke and dust in the equipment space, avoid operational environment with much dust such as metal polishing and rubbing.  air pressure: 86-106kpa  in certain environment, anti-static floor, strengthen shield and the other equipments should be installed.  strict quality requirement of the circulating water for cooling use. Pure water, deionized water or distilled water are preferred, water contains much metallic ion and other minerals such as tap water, mineral water should not be used. 7. Material application  thin metal piece (stainless steel, aluminium, carbon steel, copper coil., ect)  ceramic 8. Industrial application  through-carved component, electronics, circuit, instrument, computer, advertisement decoration  ceramic industry