Ganga Steel

Varachha, Surat, Gujarat

Cutting System		Two oil cylinder on the cutter.
		Length-set cutting after roll formed
		and could pre-cutting to switch off the coils
Control System		Delta PLC and Inverter
Manual decoiler		Max width of coiling: 1450mm
		Max weight of loading: 5000kg
Output Supporter		2 Pcs Simple Supporter
Dimension of the machine		8.5m1.5mm1.2m
Weight of the machine		6000kg

Cutting System		Two oil cylinder on the cutter.
		Length-set cutting after roll formed
		and could pre-cutting to switch off the coils
Control System		Delta PLC and Inverter
Manual decoiler		Max width of coiling: 1450mm
		Max weight of loading: 5000kg
Output Supporter		2 Pcs Simple Supporter
Dimension of the machine		8.5m1.5mm1.2m
Weight of the machine		6000kg

Profile of

Panel Roll Forming Machine

• Feeding width:1000mm
• Effective width:840mm
• Material thickness: 0.4-0.8mm

Process flow of

Panel Roll Forming Machine

• Decoiling
• feeding
• forming
• cutting
• production

Manual Decoiler

• Material coil inner diameter: 450mm-700mm
• Max coil width: 1000mm
• Carrying capacity: 5T

Forming Device

• Number of forming steps: 18 steps
• Shaft material: 45 steel with harden treatment, outer diameter 85mm
• Roller material: 45steel
• Main motor power: 15kw
• Forming speed: 8-10m/min
• Voltage: 220V/50Hz/3 phrase

Cutting Device

• Hydraulic cutter
• blade, puncher and mold material: Cr12 steel with quenched treated 60-62C
• cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.

Controlling Device

• screen: 5.7 inch Delta screen from Taiwan
• PLC: Delta DVP14ES from Taiwan
• coder: Delta

Hydraulic

• Advanced hydraulic system from Taiwan
• Power: 11kw

Profile of

Tile Making Roll Forming Machine

• Feeding width:1000mm
• Effective width:840mm
• Material thickness: 0.4-0.8mm

Process flow of

Tile Making Roll Forming Machine

• Decoiling
• feeding
• forming
• cutting
• production

Manual Decoiler

• Material coil inner diameter: 450mm-700mm
• Max coil width: 1000mm
• Carrying capacity: 5T

Forming Device

• Number of forming steps: 18 steps
• Shaft material: 45 steel with harden treatment, outer diameter 85mm
• Roller material: 45steel
• Main motor power: 15kw
• Forming speed: 8-10m/min
• Voltage: 220V/50Hz/3 phrase

Cutting Device

• hydraulic cutter
• blade, puncher and mold material: Cr12 steel with quenched treated 60-62C
• cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or wasting, high level safety factor.

Controlling Device

• screen: 5.7 inch Delta screen from Taiwan
• PLC: Delta DVP14ES from Taiwan
• coder: Delta

Hydraulic

• Advanced hydraulic system from Taiwan
• Power: 11kw

Simple output frame

• simple frame weld bu 8 U bar, 1 pcs of 3m

We are manufacturing and exporting of Corrugated Sheet

Roll Forming Machine

. These products are designed to reduce man power and stable steel base design. These machines are used in industrial sectors. Corrugated Sheet

Roll Forming Machine

are equipped with various features including en31 material hafts, elecon gear box, abb motors etc. Corrugated Sheet

Roll Forming Machine

can process sheets of any required length which can be easily programmed.

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming Line with 18 stations, 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

Technical Specifications of

Roll Forming Machine

• Maximum sheet width that can be formed : 1250 mm
• Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
• Horizontal distance between shafts : 500mm
• Number of forming stations : 16 nos.
• Total HP for Line : 8
• Speed of the machine : 10 -14 mt / mint
• Size of machine : 9500 x 1700 x 1100 mm

• Entry GateEntry gate will be provided for movement of sheet to roll former.
  
  Main BaseThe main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
  
  Mill stands (Station)The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
  
  Roll shaftsThe roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
  
  DriveThe drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor.
  
  ToolingOne set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, key way, rough profiling, profile machining and inspection with final template for above.
  
  Cutting Unit (Hydro)Hydraulically operated power pack along with cutting die with 3 HP electrical.

Roll forming machine we are manufacturing and exporting of corrugated sheet roll forming machine. These products are designed to reduce man power and stable steel base design. These machines are used in industrial sectors. Corrugated sheet roll forming machine are equipped with various features including en31 material hafts, elecon gear box, abb motors etc. Corrugated sheet roll forming machine can process sheets of any required length which can be easily programmed. D coiler 5 ton cap. Entry gate with roll forming line with 18 stations, 10 h.p. Electrical. Control panel semi auto cutting unit (hydro.) technical specifications of roll forming machine maximum sheet width that can be formed : 1250 mm maximum sheet thickness in crca strips that can be formed : 1.2 mm horizontal distance between shafts : 500mm number of forming stations : 16 nos. Total hp for line : 8 speed of the machine : 10 -14 mt mint size of machine : 9500 x 1700 x 1100 mm mandrel uncoiler coil weight : 5 mt max coil width : 1250 mm coil bore : 450 mm min, 510 mm max dia. Mandrel movement : manually adjusted back tension : manually adjusted entry gate entry gate will be provided for movement of sheet to roll former. Main base the main base is ms fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Manufacturing of this range of Rolling Shutter Pati Forming Machines, involves using the finest raw materials and modern machines, in compliance with the industry set norms and guidelines. Owing to this, the offered range has a superior functionality and a commendable resistance to corrosion. Its superior functional life, reasonable pricing and user friendly nature, make the range highly asked for.

Manufacturing of this range of Rolling Shutter Pati Forming Machines, involves using the finest raw materials and modern machines, in compliance with the industry set norms and guidelines. Owing to this, the offered range has a superior functionality and a commendable resistance to corrosion. Its superior functional life, reasonable pricing and user friendly nature, make the range highly asked for.

Features:

• User friendly
• Longer functional life
• Impeccable functionality