Hariomsteel

Mandideep, Bhopal, Madhya Pradesh

Hariom Steel is a leading supplier of Slip-On Pipe Flanges, known for their strong corrosion resistance. These flanges are used in a variety of applications, including boiler barriers, furnace parts, tube bases, oil burner components, kiln linings, glass melds, annealing cases, and industrial mufflers. Made from Inconel Alloy, they offer resistance to oil-ash rust and can withstand molten copper, lead, and tin. This material is ideal for furnace components, kiln linings, and heating frames. For heavier construction components, it is recommended to maintain preheating and inter-pass temperatures between 200 and 300 degrees Celsius. Due to its exceptional oxidation protection at high temperatures, it is extensively used in furnace components and boiler baffles. It is the only heat-resistant metal capable of enduring liquid copper and brass.

Hariom Steel is a distinguished supplier of Weld Neck Pipe Flanges, which can be welded using any conventional technique. Its appropriate heated work range is 2000 degrees Fahrenheit to 2200 degrees Fahrenheit (1093 degrees Celsius to 1204 degrees Celsius), but it should not be worked below 1650 degrees Fahrenheit (899 degrees Celsius). Super Duplex Steel Weld Neck Flanges is hard enable steel that can be tempered as high as 1350 degrees Fahrenheit to create high impact toughness and is oxidation resistant up to 1500 degrees Fahrenheit sporadically and 1200 degrees Fahrenheit constantly. Temper for desired rigidity, furnace or air cool to 1750F - 1850F (954C - 1010C), and oil quench for maximum hardness. This steel is typically chosen based on heat treating reaction, mechanical qualities, and fabricating traits, depending on the customer's end-use needs.

Hariom Steels is a distinguished supplier and distributor of Blind Pipe Flanges, which is a high-grade austenitic steel with excellent rust resistance. However, corrosion resistance is restricted unless it is improved further through procedures such as hardening, tempering, and polishing. Because of the high carbon concentration in these Inconel Alloy Blind Flanges, chromium carbide compounds develop, giving exceptional wear protection and edge retention when hardened. However, using this product at these higher operating temperatures results in a significant decrease in tensile strength and hardness, with a following rise in ductility. When heated to 1500 degrees Fahrenheit or higher, they will harden to some extent unless gently chilled to below the crucial temperature. It undergoes heating at temperatures ranging from 1200 to 1400 degrees Fahrenheit (649 to 760 degrees Celsius), followed by air chilling.

Hariom Steels is a distinguished supplier of Socket Weld Pipe Flanges, which is a type of austenitic steel with intermediate to high corrosion protection. Alloy 20 Socket Weld Flanges is a high alloyed, acid-proof steel that has been created to withstand corrosion in dilute sulphuric acid. This is super austenitic steel with intermediate to high corrosion protection in a variety of industrial environments. It is high-alloy austenitic steel designed for use in the process sector under extreme corrosion circumstances. It is austenitic steel designed for use under extreme corrosion conditions, with excellent resilience to acidic assaults such as sulphuric, phosphoric, and acetic acid. This is an austenitic steel standard with intermediate to high corrosion resistance, and its high alloy makeup provides excellent resistance to pitting and corrosion in a variety of settings.

Hariom Steels is a distinguished manufacturer of Ring Type Joint Pipe Flanges, which are made from austenitic steel with a high alloy content, providing excellent rust protection. Super Duplex Steel Ring Type Joint Flanges were initially designed to withstand dilute sulfuric acid conditions. These flanges offer resistance to stress corrosion cracking and acidic corrosion caused by chlorides. They are used in various applications, including chemical processing, gas and oil well pipelines, pollution control components, acid generation, heat exchangers, and pickling parts. Additionally, they are commonly used in seawater management, food and beverage processing, hydrometallurgy, and pharmaceuticals. These flanges are known for their great formability and weldability, as well as their strong resistance to crevice and stress corrosion cracking.

Hariom Steels is a supplier of AWWA Pipe Flanges, made from low carbon high alloy austenitic steel, which is extensively used in applications where rust resistance is essential. Stainless Steel AWWA Flanges can be cold- and hot-formed, but they can only be hardened through cold working, making them challenging to process and prone to work hardening. This product features a mix of chromium and molybdenum, providing enhanced resistance to pitting and crevice corrosion caused by chlorides. It also offers exceptional resilience to stress corrosion cracking compared to other steel types. AWWA Pipe Flanges have a significantly higher rate of thermal expansion than non-alloyed steel, which, combined with lower thermal conductivity, results in greater distortion under thermal stress.

Hariom Steels is a distinguished exporter of Reducing Pipe Flanges, which are weldable but can be susceptible to heated fractures. Alloy 20 Reducing Flanges are made from super austenitic steel, designed to offer intermediate to high corrosion protection in various industrial environments. While these flanges exhibit exceptional resilience to hot marine water and chloride conditions, they are not completely immune to severe laboratory tests, such as exposure to boiling magnesium or lithium chlorides. They are generally resistant to uniform corrosion in environments where the corrosion rate remains within acceptable limits. Copper back-up plates can aid in faster heat rejection; however, surface-fusing these plates is not permitted to avoid cracking in the solder metal.

Hariom Steels is a supplier of Spectacle Pipe Flanges, known for their great strength and hardness, as well as excellent corrosion protection. However, the nitriding procedure of these Alloy 20 Spectacle Blind Flanges can reduce corrosion resistance and is generally recommended only in critical situations where the benefits outweigh the drawbacks. These flanges are used in a variety of applications, including cutlery, steam and gas turbine blades, kitchen tools, bolts, nuts, screws, pump and valve components, shafts, mine climbing rigs, dental and medical instruments, nozzles, hardened steel balls, and seats for oil well pumps. Due to its lower strength, it can handle some pressure that might otherwise contribute to element cracking. However, it is not completely resistant to environmental conditions such as aerated saltwater.

Hariom Steels is a distinguished supplier of Long Weld Neck Pipe Flanges, which are commonly hardened yet remain machinable. Duplex Steel Long Weld Neck Flanges offer modest corrosion protection across various environments, positioned between standard austenitic alloys and highly alloyed molybdenum types. However, they are not entirely impervious to environmental conditions such as aerated saltwater. Due to the tendency of this steel, combined with austenitic weld metal and excessive heat input, to develop heat cracks, it is essential to grind tacks or ensure they are free of crater cracks. These flanges have a wide range of applications, including in dentistry and surgical tools, pipes, valves and nozzles, automobile components, and more.

Hariom Steels is a distinguished supplier of Lap Joint Pipe Flanges, which are less rust resistant than austenitic types. Nickel Alloy Lap Joint Flanges is an austenitic chromium-nickel grade with good oxidation protection up to 1094 C. It is recommended for uses where sensitization and later corrosion by high-temperature gases or condensates during closure may be an issue. This product is perfect for high-temperature uses such as thermal treatment and chemical processing. It's a medium carbon austenitic steel designed for high-temperature uses like furnace parts and heat treatment machinery. This is a multi-purpose heat resilient steel with oxidation resistance up to 2010 F (1100 C) under insignificantly cyclic environments.

Hex Bolts are standard fastening components characterized by their six-sided head, which allows for secure tightening with a wrench or socket. They are widely used in various industries including construction, automotive, and machinery due to their durability and strength. The hexagonal shape provides a greater surface area for applying torque, ensuring a tight and reliable connection.These bolts are available in various materials and sizes to accommodate different load requirements and environmental conditions.Standard six-sided head for secure fasteningSuitable for a wide range of applicationsAvailable in multiple materials and sizesProvides strong and reliable connectionsEasy to install with standard tools

Anchor bolts are essential fastening components designed to attach structures or objects to concrete. They are crucial in various applications, including construction, machinery installation, and building anchorage. Anchor bolts provide robust support and stability, ensuring that the connected elements remain securely in place.Available in different types and sizes, anchor bolts can meet diverse load requirements and environmental conditions. Their design ensures efficient load transfer, enhancing the overall structural integrity.Designed for securing structures to concreteEssential for construction and machinery installationAvailable in multiple materials and sizesProvides strong and reliable connectionsVariety of types to suit specific applications

Hex nuts are one of the most common types of nuts, known for their hexagonal shape which provides easy wrenching and turning. They are used in conjunction with bolts, screws, and other fasteners to secure materials together.Standard six-sided nut designUsed in various applications for secure fasteningCompatible with a wide range of bolts and screwsAvailable in different materials like steel, stainless steel, brass, and nylonIdeal for general-purpose use

Heavy hex nuts are larger and thicker than standard hex nuts, offering greater strength and load-bearing capacity. They are typically used in heavy-duty applications where extra durability is required.Thicker and wider than standard hex nutsDesigned for high-strength and heavy-duty applicationsCommonly used in structural and industrial projectsProvides superior load distributionMade from high-strength materials

Lock nuts are specially designed to prevent loosening under vibration and torque. They come in various types, including nylon insert lock nuts, metal lock nuts, and prevailing torque nuts.Prevents loosening due to vibrationIdeal for applications with high vibrationAvailable in nylon insert and metal variantsEnsures secure and long-lasting fasteningUsed in automotive, machinery, and aerospace industries

Castle nuts, also known as castellated nuts, have slots (notches) cut into one end. These slots are used to secure the nut with a cotter pin, preventing it from turning and loosening. They are commonly used in applications where the nut must be secured after tightening.Slots for securing with a cotter pinPrevents rotation and looseningUsed in automotive and machinery applicationsIdeal for applications requiring precise lockingCommonly used with bolts that have a drilled hole

Flange nuts have a built-in washer-like flange that distributes pressure evenly over the part being secured. This design reduces the risk of damage to the material and provides a secure, vibration-resistant fastening.Integrated flange for even pressure distributionReduces the need for a separate washerProvides a strong and secure holdResistant to loosening from vibrationCommonly used in automotive and industrial applications

Standard washers are essential components used with fasteners like bolts and nuts. Their primary function is to distribute the load of the fastener, prevent damage to the surface being fastened, and reduce the risk of loosening due to vibrations.Flat, round disc design with a central holeUsed to distribute the load of a threaded fastenerPrevents damage to surfaces by providing a smooth bearing surfaceReduces the risk of loosening due to vibrationsAvailable in various materials like steel, stainless steel, brass, and plasticCommonly used in automotive, machinery, and household applications

Spring washers, also known as lock washers, are designed to prevent fasteners from loosening due to vibrations and torque. Their unique shape allows them to exert a spring force, maintaining tension and holding the fastener in place.Helical or wave design that provides spring forceUsed to maintain tension and prevent loosening of fastenersCommonly used in applications with vibration or dynamic loadsAvailable in various materials like steel, stainless steel, and brassProvides a locking mechanism without the need for adhesives or locking nutsIdeal for automotive, machinery, and electronic applications

Spiral wound gaskets have proven to be the most reliable sealing element for use in difficult, critical and arduous duties. Spiral wound gaskets are used in Refinery, Petrochemical, Chemical, Steam lines and Process Industries, where they have many advantages over older types of gaskets.These gaskets are manufactured to International specifications such as BS, API, ASME, DIN. We also manufacture to customer's specifications

Ring Joint Gaskets are precision-engineered components designed for high-pressure applications. They are commonly used in the oil and gas industry, particularly in offshore and onshore drilling operations, and in high-pressure valve and pipework systems. Made from solid metal rings, these gaskets are capable of withstanding extreme pressure and temperature conditions.These gaskets conform to international standards such as API, ASME, and ANSI, ensuring compatibility and reliability across a range of industrial applications. Their robust design and material composition make them ideal for maintaining a secure seal under the most demanding conditions

Non-metallic gaskets are versatile sealing components designed for a wide range of applications across various industries. Constructed from materials such as elastomers, compressible fibers, or PTFE, these gaskets provide excellent resistance to chemicals, temperature fluctuations, and pressure variations. They are ideal for applications requiring flexibility, conformability, and effective sealing in less extreme environments. Non-metallic gaskets are commonly used in industries such as automotive, chemical processing, and manufacturing for sealing flanged joints, pipe connections, and equipment housingsNon-metallic gaskets are highly versatile and effective in various applications due to their excellent chemical resistance, flexibility, and ability to conform to irregular surfaces. They can handle a wide range of temperatures and pressures, ensuring reliable sealing. Their compressible nature helps create tight, leak-proof seals, and many non-metallic gaskets also offer electrical insulation. Additionally, they are cost-effective and easy to install, making them a practical choice for many sealing needs

Metal gaskets are crucial for ensuring reliable, leak-proof connections, even in the most demanding conditions. Their robust construction and superior sealing performance make them the preferred choice across industries including oil and gas, chemical processing, and automotive. At Asian Sealing Products, we offer a comprehensive range of metal gaskets designed to meet the precise requirements of each industry.They are designed to withstand extreme temperatures and pressures, ensuring a secure seal even under harsh conditions. Their high resistance to chemical corrosion and physical wear extends their service life and minimizes maintenance requirements. Additionally, these gaskets offer excellent compression resilience and conformability, which ensures a tight seal across various flange surfaces

The 45-degree forged elbow is a crucial component in piping systems, designed to provide a smooth transition between two pipes at a 45-degree angle. Engineered for durability and reliability, this elbow is commonly used in various industrial applications, including oil and gas, chemical processing, and construction.Manufactured from high-quality forged steel, the 45-degree elbow ensures exceptional strength and resistance to high pressures and extreme temperatures. It adheres to rigorous international standards, such as ASTM, ASME, and DIN, guaranteeing superior performance and longevity.

The 90-degree forged elbow is an essential fitting in piping systems, engineered to create a sharp change in direction between two pipes at a 90-degree angle. This elbow is widely utilized in various sectors, including oil and gas, chemical processing, and water treatment, where a precise and reliable angle transition is required.Crafted from high-quality forged steel, the 90-degree elbow offers outstanding strength and durability, capable of withstanding high pressures and extreme temperatures. It complies with stringent international standards such as ASTM, ASME, and DIN, ensuring exceptional performance and long-term reliability in demanding environments

The forged fitting coupling is an essential element in piping systems, designed to connect two pipes or tubes securely. Its robust construction ensures a tight seal, preventing leaks and maintaining the integrity of the fluid or gas being transported. This coupling is widely used in diverse industries, including oil and gas, petrochemical, and water treatment. Crafted from premium-quality forged steel, the coupling offers exceptional durability and resistance to high pressures and extreme temperatures. It conforms to stringent international standards, such as ASTM, ASME, and DIN, ensuring reliable performance and extended service life in demanding industrial environments.

The forged fitting bushing is an essential component in piping systems, designed to connect pipes of different sizes by reducing the size of a larger fitting. Engineered for durability and reliability, this bushing is commonly used in various industrial applications, including oil and gas, chemical processing, and construction. Manufactured from high-quality forged steel, the bushing ensures exceptional strength and resistance to high pressures and extreme temperatures. It adheres to rigorous international standards, such as ASTM, ASME, and DIN, guaranteeing superior performance and longevity. The precise engineering of the forged fitting bushing ensures a secure and leak-proof connection, maintaining the integrity of the piping system under demanding conditions.

The forged fitting Hex Nipple is a vital component in piping systems, designed to connect two pipes or fittings together. With its hexagonal shape in the center, it provides an easy grip for installation and removal using a wrench or other tools. This component is commonly used in various industrial applications, including oil and gas, chemical processing, and construction.Manufactured from high-quality forged steel, the hex nipple ensures exceptional strength and resistance to high pressures and extreme temperatures. It adheres to rigorous international standards, such as ASTM, ASME, and DIN, guaranteeing superior performance and longevity. The precise engineering of the forged fitting hex nipple ensures a secure and leak-proof connection, maintaining the integrity of the piping system under demanding conditions.

The Sockolet is a type of branch fitting designed to provide a connection point for smaller diameter branch pipes to larger run pipes, utilizing a socket weld connection. It is widely used in industries such as oil and gas, chemical processing, and power generation, where reliable and efficient piping systems are essential.Made from high-quality materials, the Sockolet is built to withstand high pressures and temperatures, offering exceptional durability and performance. Its socket weld design ensures a strong, leak-proof connection, enhancing fluid flow efficiency and system integrity. The Sockolet adheres to rigorous international standards, including ASTM, ASME, and MSS-SP, guaranteeing superior quality and longevity. Its precise engineering and robust construction make it an ideal choice for piping systems requiring secure and efficient branch connections

The Threadolet is a branch fitting designed to create threaded connections between small diameter branch pipes and larger run pipes. It is commonly used in piping systems across various industries, such as oil and gas, petrochemical, and chemical processing, where quick and reliable threaded connections are required.Constructed from high-quality materials, the Threadolet is built to withstand high pressures and temperatures, providing excellent durability and performance. Its threaded design offers a secure and leak-proof connection, simplifying installation and maintenance while enhancing system integrity. The Threadolet adheres to stringent international standards, including ASTM, ASME, and MSS-SP, ensuring superior quality and a long service life. Its precise engineering and robust construction make it an ideal choice for applications requiring efficient and reliable threaded branch connections

The Nippolet is a specialized branch fitting used for connecting small diameter branch pipes to larger run pipes, offering a compact and efficient solution for piping systems. It is commonly employed in industries such as oil and gas, petrochemical, and water treatment, where space constraints and precise connections are critical.Constructed from high-quality materials, the Nippolet is designed to withstand high pressures and temperatures, ensuring durability and reliability. Its design provides a secure and leak-proof connection, optimizing fluid flow and minimizing the risk of system failures. The Nippolet meets stringent international standards, including ASTM, ASME, and MSS-SP, ensuring superior quality and performance. Its precise engineering and compact construction make it an ideal choice for piping systems requiring efficient small-diameter branch connections