Leeb Hardness Test Blocks : We offer wide range of Test Block for Digital Portable Hardness Tester of all range and scale. We offer low, medium and high hardness test block with all scale Rockwell, Brinell and Vickers hardness tester.

Using the Genuine Leeb Scales (HL) : The Leeb rebound method was invented in 1975. Since then, Proceq has maintained the genuine Leeb standard HL. That means, a measurement of a sample showing a result of 750 HLD by Proceq in 1975, done with the first generation Equotip, would still deliver the exact same result today, done with the most recent generation. With Equotip test blocks, end users can check if their testers conform with this hardness unit, similarly to using a ruler for length measurements. During a Leeb hardness measurement, an impact body with a hard ball indenter is launched by spring energy against the sample, and then rebounds. The ratio of the rebound velocity vr to the impact velocity vi multiplied by 1000 yields the hardness value HL (Leeb hardness).

Features :

• Measures hardness
• Highly durable
• Superior performance
• Longer working life

Image Analysis & Micro-Measurement Software

Introduction - Ver. 4.0 is A new generation Image analysis Software meant for Metallurgist to do analysis in the simplest way. This is a single screen window based system. The System is flexible, independent to adopt any capture card, camera and Microscope.

Ver. 4.0 can handle monochrome, gray (8 bits) and colour (24 bits) images. Multiple images of any size can be opened and displayed on the screen for analysis or comparison. The software support most common formats like BMP. JPEG, TIFF, PNG, GIF & PSD. The live image can be observed and captured on the same platform. Since the system is made in window environment, graphs and charts displayed on the monitor can be quickly transferred into other window based program like MS Word, MS Excel or any other commercial window based software for the use in reports and presentation

Ver 4.0 Image Analysis software can be used in Steel plants, Metal forging industry, Oil & gas industry, Material Science, Mineralogy metal and metal strength analysis Cement (Klincker) quality control and where ever Metallurgical microscope are used in. This Package is very useful Educational Institutions and All Material Science Technocrats And Metallurgists.

Measurement Tools.

• Calibration
• Length
• Angle
• Perimeter
• Width
• Radius
• Area
• Color
• Counting
• Flakes
• Draw Free Circle

Metallographic Tools

• Grain Size
• Phase - ASTM E 566 1245
• Decarburization - ASTM E 1077
• Coating Thickness - ASTM B 487
• Nodularity - ASTM A 247
• Porosity -  ASTM 276
• Inclusion - ASTM E 454 – E 1245
• Particle Measurement:
• Density
• Filters
• Invert
• Annotation
• Back Ground Removal
• Amalgamation
• Phase on Rectangular Area
• Amalgamation

Some more Features from Main Menu:

• Save & Save As
• Report Preview
• Zoom
• Inclusion DIN
• DIN PER
• Gallery
• Company Name
• Delete Calibration:
• Open Image & Convert
• Show Capture
• Modify or Comparison
• Gray Scale
• Resize Picture
• Options
• Capture

Measurement Tools :

• Calibration
• Length
• Angle
• Perimeter
• Width
• Radius
• Area
• Color
• Counting
• Flakes
• Draw Free Circle

Metallographic Tools :

• Grain Size
• Phase ASTM E 566 1245
• Decarburization ASTM E 1077
• Coating Thickness ASTM B 487
• Nodularity ASTM A 247
• Porosity ASTM 276
• Inclusion ASTM E 454 – E 1245
• Particle Measurement
• Density
• Filters
• Invert
• Annotation
• Back Ground Removal
• Amalgamation
• Phase on Rectangular Area
• Amalgamation

Some more Features from Main Menu :

• Save & Save As
• Report Preview
• Zoom
• Inclusion DIN
• DIN PER
• Gallery
• Company Name
• Delete Calibration
• Open Image
• Open Image & Convert
• Show Capture
• Image Modify or Comparison
• Image Gray Scale
• Image Resize Picture
• Options
• Capture

Features :

• Fast Scanning Speed
• Wide Viewing Angle
• Auto DAC with - 6dB and -14dB Curves
• Li-ion battery for long battery operation
• Low noise production

Technical Specifications :

• Test Range - 10 mm to 5000 mm ( in steel ). In Hot Key Mode it has 13 preset values. In Fine Mode it is adjustable in step of 1mm
• Velocity - 1000 meters/second to 9999 meters/second . In Hot Key Mode it has 7 preset values. In Fine Mode it is adjustable in step of 1 meter/second,
• Delay - Variable from 0 to 3000 mm
• Gain - Total Amplifier Gain  - 140 dB
• Calibrated Gain - 100 dB adjustable in steps of 0.5, 1, 2, 6, 12 or 20 dB
• Rejection - 0 to 80% FSH with LED indication
• Rectification - Full wave rectification with filtering
• Frequency - Broad Band amplifier 0.5 MHz to 15 MHz
• Test Modes - Pulse Echo and Transmit/Receiver
• Connectors - BNC and LEMO ( Size 1 ) both are provided
• Monitor - Dual gate adjustable in 1% of Screen width with Positive/Negative logic, Gate Expand modes
• Gate Expand - Expands Range to width of the gate
• A-Scan memory - 200 Trace Patterns can be stored, recalled, printed or transferred to PC via RS-232 serial port
• Calibration Set-up  - 50 different calibration set-ups can be Stored and Recalled
• Software - Using “EinSoft TFT” software A-Scan with calibration set-ups can be transferred to PC via RS-232 serial link for storage in PC or printing
• Display - High brightness colour TFT LCD Display. Display area 122x92mm (320 x 240 Pixel). Eleven different colour scheme options
• Full Screen - By pressing Zoom key A-Scan can be displayed in Full Screen area
• Reference A-Scan - Reference A-Scan pattern of standard test object can saved and recalled in the background for easy comparison during testing
• DAC - DAC curve can be entered using minimum 2 to maximum 10 points and then digitally drawn with –6dB and –14dB curves
• Digital Readout and Trig
• Function - Thickness/Depth can be displayed in digital readout when using a normal probe and Beam path, Surface Distance and Depth are directly displayed when angle probe is in use
• Update Rate - 50Hz
• Power - Lithium-Ion Battery pack 14.4VDC, 4AH, gives 8 hours continuous operation from fully charged battery
• Charger - Input Voltage 100 to 240 VAC. Charges status indicator is provided.
• Temperature - 0 to 55° C
• Size - 152x255x70 mm ( HxWxD )
• Weight - 2.3 Kgs. with Battery

Portable Coating Thickness Gauge NOVOTEST TP-1 – device for operative non-destructive testing of coating Thickness in accordance with standard ISO 2808 with high measurement accuracy.

Coating Thickness gauge is designed to test :

• Thickness of various thick protective coatings on various metals and alloys;
• Thickness of paint and other dielectrics – radioabsorbing, mastic, teflon, plastic, electroplating coatings on steel;
• Thickness of electroplating and paint coatings on non-ferromagnetic alloys and non-ferrous metals;
• Thickness of bitumen and other thick coatings on various metals and alloys;
• As well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughness

Electronic Thickness gauge – device which widely used in shipbuilding and automotive industries for measuring the Thickness of paint, in order to test the quality of products, also it used for determining technical condition of the tested objects.

Advantages

• Large thickness measurement range
• Convenience and ease in operation
• Minimum number of controls - one button – one function.
• Graphical display with backlight
• Automatic recognition of probe
• Indication of the connected probe type
• Control of batteries.

Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.

Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.

Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.