Hi-Reach Construction Equipments (P) Ltd Delhi

DOUBLE COUPLER  (DROP FORGED) A one-piece load bearing coupler used for connecting two scaffold tubes at right angles.

Wall formwork is a multi purpose formwork and is suitable for most types of in situ concrete construction such as walls, foundations, columns, rectangular or circular tanks, dams, Sea defense works etc. These are made from high finish steel sheets duly stiffened by steel angles and held together by a rigid clamping and waling system to ensure a good quality finish time after time. This system of formwork gives complete versatility and at the same time being durable, accurate and fast, allowing simple erection with long life and low maintenance. It may be assembled to give a strip and re-erect sequence or may be formed into large crane handled units. Whether positioning by hand or moving large areas of formwork by crane, steel panels will give a consistently good finish with only a single joint mark between panels.

Floor forms are made out 14 G / 12G press bent sheet and are light in weight as compared to the conventional angle shuttering plate. Adjustable floor forms fill up odd shapes and unstandard slab forms, thus eliminating cutting and wastage of timber all together. Standard slab forms are made in 600 mm width and 1150 / 900 mm length. Adjuster plates are made in 250 mm width and 1150 / 900 mm lengths. Perfect solution to slab shuttering problem. Cuts labour cost. Gives excellent concrete finish. Light weight combined with rigidity. STANDARD SIZES 1150 x 600 1150 x 300 900 x 600 900 x 300 Adj. Panel 1150 x 250 Adj. Panel 900 x 250

Quick strip system can be used very conveniently for supporting In situ or pre-cast waffle moulds of size 900mm x 900 mm. Salient features are: Light weight interchangeable primary and secondary beams carried by Drop Heads form accurate grids. Robust construction to with stand site abuse with long life and less maintenances. Wide Beam flanges for supporting moulds. Early striking facility incorporated using well proven Drop Head System. Beams can be used with cuplok scaffolding system or standard props. Early striking facility allows Beams and Moulds to be reused while the concrete remains supported during curing, thereby reducing the overall amount of equipment required.

For greater speed & economy Column clamps are quickly adjusted and secured to ensure absolute rigidity of steel and timber formwork for concrete columns, beams, hanging soffits and casings to steel stanchions. They save time, labour and materials by completely eliminating the cutting to waste of timber and the eventual deterioration and scrapping of materials. The arms of all three sizes are interchangeable and suitable for square and rectangular sections. The slot arrangement allows for simple, speedy and accurate adjustment to any dimension within the size range. There are no loose parts to be lost or mislaid and the clamps can be used an unlimited number of times. Wedges are secured to the arms by a flexible galvanized steel wire instead of the usual chain and ring. The greater strength and flexibility of this wire provides the solution to the perpetual and costly problem of broken chins and lost wedges

Telescopic Spans are result of many years experience in building construction and civil engineering. They incorporate all the feature which are demanded by industry for today's method of construction. Advantages of Telescopic Spans Saving on time and cost by relating the use of the same section on the same job. Quick and easy erection and stripping. Single simple adjustment for length of span. Intermediate supports eliminated. No loose parts to be lost. Compact for storage and transport. Stand rough site handling and reduce maintenance cost. Eliminates cost of cutting and wastage of timbe