Other Products / Services #5212825

PRODUCT DISCRIPTION

The IM508 is an Android-based touchscreen diagnostic, service and key programming tablet. This 7-inch Wi-Fi tablet includes the XP200 key programmer capable of EEPROM and key reading and writing. The IM508, an all systems code reader and service tool, offers powerful IMMO functionality including backup, restore, adaptations and coding, key generation and key learning & remote learning.

MaxiIM IM508 is a fast, easy-to-use, and ultraportable immobilizer and key programming device. The Android-based touchscreen tablet features powerful quad-core processor, intuitive design and straight-forward interface. Equipped with the XP200 key programmer, IM508 is capable of providing extraordinary service functions for the immobilizer system.

Together with the ability to quickly diagnose all modules of the majority of makes and models on the market, IM508 provides you with superior special functions. IM508 is the perfect solution for shops and technicians who demand affordable and powerful IMMO and diagnostic services.

PRODUCT DESCRIPTION

THINKTOOL READER HD:- 5″ Inch Professional OBD2 Scanner for Heavy Duty Commercial Vehicles Automotive Diagnostic Equipment.

THINKTOOL READER HD has the complete capabilities for full vehicle scan, read and clear DTCs, live data stream, read version information, special function, actuation test, and generate test reports.

THINKTOOL Reader HD allows technicians to reset the parameter and do parameter programming.

THINKTOOL READER HD is an intelligent diagnostic instrument for more than 31 commercial vehicles, heavy-duty trucks, and machinery worldwide. Complete capabilities for codes, live data, and actuation tests. Complete capabilities for full vehicle scan, read and clear DTCs, live data stream, read version information, special function, actuation test and generate test reports. Also includes most common special functions integrated such as DPF Regeneration, Injector Coding, Reset Service(MIL), Maintenance Confirmation, Injection Quantity Adjustment, Particulate Filter Replacement Reset, Reset Pressure Differential Sensor, Reset Pressure Limiting Valve, Bleeding The Adblue Circuit, VGT Electronic Actuator Installation And Calibration, Trip Reset, Parked SCR Efficiency Test, DPF Ash Accumulator Reset and more.

Idle Speed Adjustment, Speed Limit, Cruise Control, Idle-Stop System, PTO, Coolant Level Switch, Exhaust Brake Valve, Intake Air Preheating, Vehicle Speed Controller, Air Conditioner, Oil Pressure Sensor, Electronic Fan, ABS, Automatic Transmission, and more. 

Support 67 modules all opened

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34, 35, 36, 38, 40, 42, 43, 45, 46, 47, 48, 50, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74

All 67 modules protocols supported, read and write ECU and gearbox without open shell. Professional power upgrade tool, ECU Chip tuning programmer.

FLASH 67 IN 1 Support 67 Modules

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34, 35, 36, 38, 40, 42, 43, 45, 46, 47, 48, 50, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74

ECU BENCH TOOL

Supports 5 Modules

Bench mode: For Bosch MEDC17 based on TriCore microprocessor

Bench mode: For Bosch MDG1 based on For Motorola MPC5777 microprocessor

Bench mode: For Bosch MDG1 based on For Aurix TC2xx microprocessor

Bench mode: For Bosch EDC16 based on For Motorola MPC5xx microprocessor

Bench mode: For VAG/For VOLVO MED9 based on For Motorola MPC5xx microprocessor

PRODUCT DISCRIPTION

Xhorse VVDI mini key tool comes as the replacement of VVDI key tool. It features size, weight, high speed and compatibility of mobiles. Works well for chip cloning and remote key copying and generation. VVDI mini key tool is Multi-Language Now, it’s free to switch language services.

PRODUCT DESCRIPTION

SOFI SP8 series is professional programmers specially for programming serial FLASH/EEPROM/SPI memories, with built-in 32-bit high-willarspeed processors and USB2.0 communication interfaces. It supports high-speed programming of nearly all 24/25/93/BR90 chips. In the number of supportive serial memories and the writing speed, it greatly exceeds most general and similar special programmers. It has a unique function of ISP online programming and supports more chips with continuous software upgrade. With exquisite shells made through professional mould opening and with advanced software/hardware design, SP8 series overtakes other similar products in both exterior and inner quality.

ECM / ECU REPAIR BOOK (PART-2)

COURSE DETAILS

HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY, KHANNA assures you a successful career in Automotive ECM / ECU Repair Training & Service Programming Technology. HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY gives you to best classroom facilities, labs and experienced teachers. We start students from basic level to advance level in trainings with all the latest Equipment’s. We trained students to repair all type of electronic modules like E.C.M. , B.C.M , Power Steering Module , Meter Repair And many in different training Programs . Students from all over the India Join us regular & we have also international students from Nepal , Bangladesh , Shri Lanka , Maldives , Dubai , Qatar , Germany , Canada , U.K , Australia and many more .

We got students from different different education field like Fresher / Automobile Mechanic / Car & Truck Electrician / ITI / Diploma /B.Tech & anyone who interested. We have professional tools to diagnose or program any type of control unit for BOSCH EDC15 / EDC16 / EDC17 /, Delphi, Continental, Magneti Marelli, Siemens ECM's, etc. Cars, 4x4s, SUVs, whether they are Maruthi Suzuki, Hyundai, Mahindra, Tata, KIA, BMW, Mercedes, Audi, VW, Volvo, Renault.

After Training Students are able to repair Cars, Trucks, 2-Whellers, Earthmoving Machines & more.

OUR TRAINING:

Complete Theory / Practical Training Programs.

ECM Repair Course

Sensor Knowledge.

Wiring Checking Sensor Testing.

Scanner Training.

ECM-ECU Component Checking.

Soldering / Desoldering.

ECM-ECU Fault Diagnose.

ECM-ECU On Table.

Practical of Ecm.

Fault Code In Ecm.

Immobilizer Checking.

ECM Programming/ Software.

Our Training course duration is 60 days and it covers all company ECM modules.

Car Scanning/Fault code read & solving the problem case for a clear problem.

Preparing datasheets for ECU output & input voltage pin.

ECM tuning using KTAG for reading and writing.

Training on EPS-BCM-SRS-ABS-Immobilizer-Meter.

Airbag crash programming / Resetting Airbag control unit.

Sensor signal testing using a Digital Oscilloscope.

Complete Soldering Training on the SMD chip level.

Fuel Injection Coding and Testing using a simulator.

Key Programming for ECU/BCM/IMMO.

Testing Power Regulator IC / Driver IC using voltage data sheets.

Basic training skills for the datasheet marketing process.

Providing datasheets for cars ECU.

Car & Commercial ECM / ECU Repair Training Course.

Assured Quality Training & Technical Support for the students who are willing to take the ECM Training from HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY will get Life-time Technical Support.

FUTURE SCOPE :-

After Training from our institute HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY , STUDENTS can earn money from their own start-up in Automobile/Car Repair Department , E.C.M. Repair , Electrical Repair , Meter Repair Training , BS-6 car & Truck Repair and more . Anyone after training can successful in automobile field based on their company, location, work profile, and experience.

COURSE DETAILS

HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY, KHANNA assures you a successful career in Automotive ECM / ECU Repair Training & Service Programming Technology. HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY gives you to best classroom facilities , labs and experienced teachers . We start students from basic level to advance level in trainings with all the latest Equipments . We trained students to repair all type of electronic modules like E.C.M. , B.C.M , Power Steering Module , Meter Repair And many in different training Programs . Students from all over the India Join us regulary & we have also international students from Nepal , Bangladesh , Shri Lanka , Maldivies , Dubai , Qatar , Germany , Canada , U.K , Australia and many more .

We got students from different different education field like Fresher / Automobile Mechanic / Car & Truck Electrician / ITI / Diploma /B.Tech & anyone who intrested. We have professional tools to diagnose or program any type of control unit for BOSCH EDC15 / EDC16 / EDC17 /, Delphi, Continental, Magneti Marelli, Siemens ECM's, etc. Cars, 4x4s, SUVs, whether they are Maruthi Suzuki, Hyundai, Mahindra, Tata, KIA, BMW, Mercedes, Audi, VW, Volvo, Renault.

After Training Students are able to repair Cars, Trucks, 2-Whellers , Earthmoving Machines & more.

OUR TRAINING :

Complete Theory / Practical Training Programs

ELECTRICAL TRAINING

Sensor Information

Sensor Types

Sensor Checking

Multimeter uses

Wiring Checking

Relay Checking

Car / Truck Scanning

On Table Scanning

Fault Code Language

Assured Quality Training & Technical Support for the students who are willing to take the ECM Training from HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY will get Life-time Technical Support.

FUTURE SCOPE :-

After Training from our institute HITECH AUTOMOTIVE SKILLS DEVELOPMENT ACADEMY , STUDENTS can earn money from their own start-up in Automobile/Car Repair Department , E.C.M. Repair , Electrical Repair , Meter Repair Training , BS-6 car & Truck Repair and more . Anyone after training can successful in automobile field based on their company, location, work profile, and experience.

Course Duration :- 1 Month, 2 Month, 6 Month & I Year with Govt approved international certificate.

ECM Repair Training : 

• Sensor Knowledge : Here we give knowledge about sensor. which includes sensor location, timepiece, working etc. 
• Wiring Check : This include wiring related to ecm, we tell you how to check faults and solutions. 
• Sensor Testing : In this we tell you how to test a sensor whether its working or not. 
• Scanner : Here we teach you how to use Bosch, Launch, Exe-tool, Autel, Delphi, Odis, Garuda, Vas, G-scan etc. Here we teach you how scanners work along with injectors the of finding fault. how to read the actual reading as well as DTC and online coding.
• ECV, ECM Components checking : Here we teach you PCB board and the compound link capacitor, resistance, inductor, PF diode, thermistor and the linke. this includes how to find fault in these components. We teach you how to solve these problem as well.
• Soldering and Desoldering : In this we teach you how to attach or adjust IC and PF with exact heart and temperature. we teach youhow to root up these componts as well.
• ECM-ECU Fault diagnosis : Here we teach you how you can teach fault ECM-PCB. We also teach you how you can solve the issues regarding these.
• ECM-ECU on tables : Here we teach you how you can on on an Ean on table. with your ECM is of a car or a truck.
• Practical of ECM fault code in ECM : Here we teach you how to solve ECM fault code practically
• IM Mobilizer Checking : Here we teach you remote checking, sensor and remote matching transponder matching key cutting and imo repair and cand lock repair. 
• ECU programming includes : IC Programming and how you can change touch files with later software. We also teach the installation of latest software.
• Air Bag : Here we teach you how does an airbag work a accident. We teach you the programming of an files and how to change that.
• ODO Meter : Here we teach you how to reverse the reading of the car, truck and the like. We teach you the meter reading as well. we teach you how you can break the speed limit of a vehicle.