Valves & Valve Fittings #629562

We are one of the top Manufacturers, Exporters and Suppliers of high quality Ball Valves. Our Ball Valves are engineered with accurate dimensions. Our Ball Valves are manufactured by using premium quality raw materials. Our Ball Valves are used in almost all industries. Our customers praise for our Ball Valves of their robustness and long lasting performance. Benefits

• Its minimum body cavity minimizes media retention and process contamination and enhances performance in many services
• Its ball provides super (mirror) smooth finish.
• Body Gasket : PTFE
• Seat Design (Fire Safe) : Cavity pressure releving (CPR) seats ensure that pressure generated through media expansion when the valve is closed is safely released upstream
• Its stem is blowout proof and larger in diameter
• Ball stem and body are continuously grounded to eliminate static discharge
• Replaceable handle
• Seats : PTF
• Special Options
• Control ball valves are available
• Stem Extensions
• Reduced bore and full bore options are available
• Special alloy materials are available, i.e. NAB / Brass / Gun Metal / Alloy 20 / 904 L / Hastelloy C
• Lower torque for ease of operation and reduced actuator cost

Applications

• It is widely used in Petrochemical, Oil & Gas production, Refining, Energy, Pulp & Paper and many other
• It is also used in the service of steam, chemicals, LPG, thermal fluid, chlorine, ammonia and sour gas

Minimum Order Quantity : 2 Units Material

• Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Trim : 13% Cr Steel, 304, 304L, 316, 316L, 321, 347, F51, Monel

Range

Valve Type	Size Range	Class
Single Piece	1/2" - 8"	Class 150 / 300
Two Piece	1/2" - 8"	Class 150 / 300
Three Piece	1/2" - 8"	Class 150 / 300
Types	End Connection - Flanged End Raised Face, Butt Weld End, RTJ.etc.
Operation	Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Download

We are listed amid the recognized Manufacturers, Exporters and Suppliers of good quality Rubber Seat Double Offset Butterfly Valves. Our Rubber Seat Double Offset Butterfly Valves are engineered with accuracy. Our quality checking team checks each Rubber Seat Double Offset Butterfly Valve on various quality parameters. Our Rubber Seat Double Offset Butterfly Valves are sturdy in construction. Our Rubber Seat Double Offset Butterfly Valve is praised for its long lasting performance. Benefits

• Integrally Cast Mounting pad provides direct mounting of many actuators
• Flattened body bore at stem journal ports positions stem bearing near disc, providing maximum stem support
• Disc taper pins are tangentially positioned half on disc and half in stem, which eliminates potential of failure.
• Integrally cast disc position stop perfectly locates the doisc in seat, achieving maximum seat and seal life.

Minimum Order Quantity : 2 Units Material

• Shell : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Trim : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Range

• Size Range : 2" - 72"
• Class : PN 6/PN 10/PN 16/Class 150
• Types : End Connection - Flanged / Lug / Wafer
• Operation : Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Download

We are counted amongst the leading Manufacturers, Exporters and Suppliers of good quality Single Piece Molded Seat Concentric Butterfly Valve. Each Single Piece Molded Seat Concentric Butterfly Valve is manufactured by using high quality raw materials. Our quality checking team checks each Single Piece Molded Seat Concentric Butterfly Valve on various criterions. The Single Piece Molded Seat Concentric Butterfly Valve is manufactured with precision. Benefits

• Molded-in robust seat provides bubble-tight shutoff to 150 psi.
• Cast-in top plate is an essential part of the body and is standardized to allow direct mounting of all actuators.
• Long-drawn-out neck allows adequate clearance for flanges and insulation.
• Round, polished disc and hub edge provides 360 degree concentric seating, minimum flow restriction, lower torques and longer seat life.
• It is offered in two body styles: wafer and lug. The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
• Thru-stem design provides high strength and positive disc control with standardized end connection for operator interchangeability.
• Bi-directional, self-adjusting stem seal, located in the upper journal, is suitable for vacuum and pressure while also preventing external contamination of the stem area.
• Each valve is factory tested to 110 percent of specified pressure rating.

Minimum Order Quantity : 2 Units Material

• Shell : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Trim : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Range

• Size Range : 2" - 72"
• Class : PN 6/PN 10/PN 16/Class 150
• Types : End Connection - Flanged / Lug / Wafer
• Operation : Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Download

We are the primary Manufacturer, Exporter and Supplier of Two Piece Replaceable Seat Concentric Butterfly Valve. Premium quality raw materials are used in the manufacturing of Two Piece Replaceable Seat Concentric Butterfly Valve. Two Piece Replaceable Seat Concentric Butterfly Valve has robust structure. Our Two Piece Replaceable Seat Concentric Butterfly Valve is used in various industries due to its high durability. Features

• Heavy duty, WCB / DI / SS, Wafer Body to suit ANSI 125/150
• Fully rubber lined
• One-piece disc stem
• 100% bubble tight shut-off
• Direct mounting to actuators
• Disc hub edge is rounded and polished
• Split body style

Minimum Order Quantity : 2 Units Material

• Shell : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Trim : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Range

• Size Range : 2" - 72"
• Class : PN 6/PN 10/PN 16/Class 150
• Types : End Connection - Flanged / Lug / Wafer
• Operation : Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Download

We are one of the chief Manufacturers, Exporters and Suppliers of good quality Single Piece Replaceable Seat Concentric Butterfly Valve. We use top quality raw materials for manufacturing Single Piece Replaceable Seat Concentric Butterfly Valve. Our Single Piece Replaceable Seat Concentric Butterfly Valve is manufactured with accurate dimensions. Our Single Piece Replaceable Seat Concentric Butterfly Valve is widely used in various industrial purposes. Benefits

• Robust seat seals bubble-tight against the disc, separating the valve body and stem from the line media
• A primary stem seal formed by preloaded contact of the disc hub with the flatted seat surfaces and secondary stem seal formed by an interference fit of the stem through the seat provide bubble-tight shut-off to full valve pressure rating
• Molded-in, O-ring seat serves as flange seal, eliminating the need for gaskets between the flange and the valve
• Cast-in standardized mounting patterns allow for direct mounting of manual, electric, pneumatic and hydraulic actuators
• Exclusive dovetail seat retention permits for convenient and economical field replacement
• Rounded polished disc and hub edges provide full 360 degree concentric seating, resulting in minimum flow restriction, lower seating/unseating torque and longer seat life
• Superior one-piece through-shaft provides high-strength and positive disc control
• Stainless steel taper pins are driven, sealed and locked for maximum torsional strength and resistance to vibration loads
• Each valve is factory tested to 110 percent of specified pressure rating, helping ensure bubble-tight shut-off to the full valve rating when bolted between flanges in either direction of media flow

Minimum Order Quantity : 2 Units Material

• Shell : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
• Trim : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Range

• Size Range : 2" - 72"
• Class : PN 6/PN 10/PN 16/Class 150
• Types : End Connection Flanged / Lug / Wafer
• Operation : Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Download