Write a Review
Our Products
Our Complete range of products are STRAIN GAUGES (FIBER OPTIC) and SPOT WELDABLE.
The Model FP4000 Fiber Optic Strain Gages are designed for use in environments where it may be difficult to use conventional types of strain gagesbecause of space considerations, high levels of electrical interference or where intrinsic safety is an issue. Measurements of dynamic events are also possible with these gages and the requisitedataloggers. The strain gages have a very low coefficient of thermal expansion and can be used to measure both mechanical and thermo-mechanical strains in a variety of different materials.
The accuracy of the OSP sensors is determined by sample testing of controlled batches at the factory. The manufacturing technique results in the spans shown above and is confirmed by actual strain tests performed on samples from batch lots. Other ranges available on request.
| Standard Range | FP4000-1.0 | −1000 to +1000 µε FP4000-2.5 | −2500 to +2500 µε FP4000-5.0 | −5000 to +5000 µε |
| Resolution | FP4000-1.0 | 0.15 µε FP4000-2.5 | 0.30 µε FP4000-5.0 | 0.50 µε |
| Gage Factor Accuracy¹ | FP4000-1.0 | ±3% F.S. FP4000-2.5 | ±3% F.S. FP4000-5.0 | ±10% F.S. |
| Temperature Sensitivity | 0.85 to 1.22 µε/°C |
| Strain Sensitivity | transverse strain insensitive |
| Operating Range² | −40°C to +80°C |
| L × W × H | 100 × 25 × 1 mm |
The Model 4100/4150 Strain Gage has a 51 mm gage length (3000 range, 1 sensitivity) and is designed to measure strains in steel structures (4100) and on reinforcement bars (4150) where space may be limited. The gage is installed quickly and easily by means of a capacitive discharge spot welder or, for short-term use, with special epoxy adhesives; the latter method of attachment permits the use of this gage on concrete.
Hill India (Hill India)
Plot A-7/101 , South side of G.T Road, Industrial Area , U.P. , GT Road Industrial Area, Ghaziabad, Uttar Pradesh
Share us via
