Him Overseas

Sector 28, Chandigarh

Pressed steel boulevard clamps are specialized fittings used in chain link fence systems, particularly for joining or bracing horizontal rails to vertical posts at various angles. Their robust design makes them ideal for both structural support and aesthetic alignment. Here's how they're typically used:

• Primary Function: Connects horizontal rails (top, mid, or bottom) to line or terminal posts.
• Offset or Angled Fit: Ideal for fences with sloped terrain or custom angles, allowing for flexible rail alignment.
• Stabilizes Framework: Helps brace long fence runs or gate frames, reducing sag and maintaining rigidity.
• Supports Tension: Useful in areas where chain link fabric is under high tension or where additional bracing is needed.
• Often used to reinforce gate frames, corners, or transitions between fence sections.
• Corrosion Resistance Often galvanized or powder-coated, these clamps resist rust and environmental wear, ideal for outdoor use.
• Can be used with privacy slats, barbed wire, or tension wire systems.

Pressed steel end clamps are essential components in chain link fencing systems, especially when it comes to terminating or anchoring horizontal rails. Here's how they're typically used:

• End Rail Termination: These clamps are used to securely attach the end of a horizontal rail to a terminal post (such as corner, gate, or end posts).
• Clean Finish: They provide a neat and professional finish to the fence structure by eliminating loose or unsupported rail ends.
• Support for Gate Frames: Often used in gate assemblies to connect rails to gate posts or frames, ensuring structural integrity.
• Pressed Steel Strength: Their galvanized steel construction offers excellent resistance to rust and weathering, making them ideal for outdoor use.
• Easy Installation: Typically bolted together around the rail and post, they allow for quick and secure assembly without welding.
• Corrosion Resistance Often galvanized or powder-coated, these clamps resist rust and environmental wear, ideal for outdoor use.

Pressed steel panel clamps are essential hardware components used in chain link fencing, especially for securing prefabricated fence panels to posts or frames. Their rugged design and reliable grip make them ideal for both temporary and permanent installations. Here's how they’re typically used:

• Primary Function: Securely fastens chain link fence panels to vertical posts or frames.
• Common in modular fencing systems, where panels are pre-assembled and need quick, strong attachment.
• Widely used in construction sites, event perimeters, and crowd control setups.
• Allows for easy assembly and disassembly without damaging the panels or posts.
• Helps in building gate frames, storage cages, or partition walls using chain link panels.
• Corrosion Resistance Often galvanized or powder-coated, these clamps resist rust and environmental wear, ideal for outdoor use.

Pressed steel corner rail clamps or corner clamps are essential fittings in chain link fencing systems, especially where horizontal rails meet at corners. Here's how they're used:

• Securely connects top rails or mid rails at a 90° corner where two fence sections meet.
• Maintains alignment and stability of the fence framework.
• Typically used with corner posts to hold rails in place without welding.
• Works with carriage bolts and nuts to clamp rails tightly.
• Often paired with brace bands or tension bands for added support.
• Often galvanized, these clamps resist rust and environmental wear, ideal for outdoor use.

We are into the business of providing durable and dimensionally accurate Pressed Ladder Clamps. Made using superior grade raw materials, our clamps are appreciated for their finish and high strength for holding the objects firmly. We offer these clamps in diverse specifications and at reasonable prices. We are capable of handling bulk as well as urgent orders for these clamps as we are supported by streamlined inventory. This is a unique safety product that enables a ladder to be firmly fastened by the stiles to horizontal scaffold tubes. Used in pairs.

Casting cantilever rollers play a crucial role in chain link fencing systems, especially when integrated into cantilever sliding gates. Here's how they’re used and why they’re essential:

Uses of Casting Cantilever Rollers in Chain Link Fencing

• These rollers support the gate frame, allowing it to "float" above ground between two posts.
• They enable smooth horizontal sliding without ground contact—ideal for uneven terrain or areas with debris.
• Made from cast iron or cast steel, these rollers are built to handle large, industrial-grade gates.
• Their robust construction ensures long-term durability and resistance to wear, even in high-traffic zones.
• They are typically installed in pairs—two on top and two on the bottom—to evenly distribute the gate’s weight
• Designed to fit round posts (3" or 4") and gate frames (2-1/2"), which are standard in chain link fencing.
• Their smooth operation reduces strain on automated gate openers, prolonging the life of gate motors.
• This is supplied with and without Guard.
• The wheel is Nylon/ PP.

A casting offset rail end is a specialized fitting used in chain link fencing systems to connect horizontal rails to terminal posts with a slight offset. Its cast construction makes it ideal for heavy-duty applications where strength, alignment, and durability are essential. Here's how it's used:

• Casting Offset Rail End is a galvanized steel fitting used to connect top rails or braces to fence posts at an angled offset.
• Its cup-shaped design works with brace bands and bolts to ensure secure and stable rail alignment.
• The offset design ensures precise rail alignment, giving the fence a neat appearance and reducing strain on fittings.
• Ideal for chain link fencing, it offers durability, rust resistance due to hot dip finish, and easy installation in outdoor environments.

Aluminium split gate corners—also known as gate elbows—are key fittings used in building or repairing chain link fence gates, especially for residential setups. Here's how they work and why they’re useful:

• A Split Gate Corner is used to connect and reinforce the corners of chain link gate frames.Two-piece ("split") corner fitting for creating strong 90° joints in gate frames
• It’s typically installed at the four corners of a gate, forming a rigid rectangular structure.
• The “split” design allows for easy insertion of horizontal and vertical gate pipes, making assembly faster and more secure.

Pressed Toe Board Clamp that we offer is widely in demand owing to its excellent finish, high strength, corrosion resistance and accurate dimensions. As a famed name, we make use of only high quality raw materials and hi-tech machines for the manufacturing of our Clamp. It is widely used in clamping different items and it is acknowledged for its strong hold. We make available clamp in bulk quantities and at affordable price. Toe Board Clamp is used to fix a toe board securely to a scaffold standard.

Pressed steel Omega clamps are specialized fittings used in chain link fence systems, particularly for joining horizontal rails to vertical posts with a secure and streamlined profile. Named for their resemblance to the Greek letter Ω (Omega), these clamps offer both structural and aesthetic advantages. Here's how they’re typically used:

• Omega Shape: Cradles the rail while allowing a bolt to pass through and clamp it tightly to the post.
• Primary Function: Securely fastens horizontal rails (top, mid, or bottom) to vertical posts.
• Stabilizes Framework: Prevents rail movement and maintains fence rigidity, especially in long runs or high-tension areas.
• Non-Welded Assembly: Offers a strong mechanical connection without the need for welding.
• Used in gate construction, corner bracing, or transitions between fence
• Can be used with barbed wire, privacy slats, or tension wire systems.

Casting cantilever rollers play a crucial role in chain link fencing systems, especially when integrated into cantilever sliding gates. Here's how they’re used and why they’re essential:

Uses of Casting Cantilever Rollers in Chain Link Fencing

• These rollers support the gate frame, allowing it to "float" above ground between two posts.
• They enable smooth horizontal sliding without ground contact—ideal for uneven terrain or areas with debri.
• Made from cast iron, these rollers are built to handle large, industrial-grade gates.
• Their robust construction ensures long-term durability and resistance to wear, even in high-traffic zones
• They are typically installed in pairs—two on top and two on the bottom—to evenly distribute the gate’s weight.
• Designed to fit round posts (3" or 4") and gate frames (2-1/2"), which are standard in chain link fencing.
• Their smooth operation reduces strain on automated gate openers, prolonging the life of gate motors.
• This is supplied with and without Guard.

Pressed steel double clamps are robust fittings used in chain link fence systems to securely connect two parallel or intersecting pipes, typically in structural or framing applications. Their dual-pipe grip and durable construction make them ideal for both standard and custom fence builds. Here's how they're commonly used:

• Horizontal Rail Connections: These clamps are designed to connect horizontal rails to line posts at a 180° angle, ensuring a secure and stable framework for the fence
• Mid-Rail Support: They help add mid-rails to chain link fences, which increases rigidity and prevents sagging over long spans.
• Pressed Steel Durability: Being made of galvanized pressed steel, they offer corrosion resistance and long-term durability, especially in outdoor environments
• Modular Assembly: Their bolt-and-nut design allows for easy installation and adjustment, making them ideal for modular or custom fence layouts.
• Corrosion Resistance Often galvanized or powder-coated, these clamps resist rust and environmental wear, ideal for outdoor use.

A casting industrial offset hinge is a heavy-duty hinge component used in chain link fencing systems, especially for large swing gates in industrial, commercial, or high-security environments. Its offset design and cast construction make it ideal for rugged applications. Here's how it's used:

• Casting Industrial Offset Hinge is designed to mount chain link fence gates securely to posts while allowing smooth pivoting.
• Its offset design provides gate clearance from the post, enabling full swing and reducing wear.
• Made from casting process, they offer excellent corrosion resistance with Hot dip galvanizing finish and long-term durability in outdoor environments.
• Ideal for industrial and commercial chain fencing systems requiring durable and reliable gate movement.

Owing to our sheer determination towards quality, we have established ourselves as one of prime entity engaged offering Scaffolding Column Clamps. Being a credible organization, we ensure to manufacture Scaffolding Column Clamps beyond excellence. Our Scaffolding Column Clamps are ideal to be used as the element of scaffolding system, as these are sturdy and able to withstand weather conditions and pressure. Usable with both steel and timber shuttering, adjustable column clamps can be accurately adjusted to any dimension within the size range. These clamps have no loose parts. Further interchange ability of arms of different sizes of column clamps makes them extremely versatile.

Cane bolts—also known as drop bolts or gate anchors—are versatile hardware components used in various settings for securing doors, gates, and machinery. Here's a breakdown of their common uses:

Chain Link Fence Gates:

• Primary Use: To lock one leaf of a double gate to the ground, allowing the other leaf to latch securely.
• Benefit: Prevents gates from swinging or being forced open.

Wooden and Metal Gates:

• Used on farm gates, garden gates, and driveway entrances.
• Provides a manual locking mechanism without the need for padlocks or latches.
• Double Door Systems: In barns, sheds, or storage units, cane bolts secure one door while the other opens and closes.
• Outdoor Enclosures: Used in dog kennels, pool fencing, or play areas to keep gates closed and safe.
• Commercial and Industrial Fencing: Provides a heavy-duty locking solution for large perimeter gates or restricted access areas.

The offered lot is in complete compliance with the industry standards thus, high in demand. Operation from Chandigarh(India), we make available the broad product range to the customers in minimum time. We have established a fully fledged manufacturing unit at our end for fabricating these clamps. Only certified quality of mild steel round bars and TMT bars are used for these clamps. All the clamps are hot-forged to ensure zero breakage & loss during application. With these shuttering clamps, there is no need of screwing, nailing, bolting, or drilling to construct scaffolding at construction site. Based on the application, we can also modify the shuttering clamps in terms of size, length and finish.

Pressed steel male hinges or heavy duty post hinges, available in regular and heavy-duty grades, are critical for the swinging mechanism of gates in chain link fence systems. Here's a clear breakdown of their uses based on strength and application:

• Primary Function: Male hinges are welded or clamped to gate posts and work in tandem with female hinges to allow the gate to swing open and closed.
• Heavy-Duty Load Bearing: Designed to support large, heavy gates without bending or loosening over time.
• Load Bearing: Can handle the weight and stress of frequent gate use without bending or breaking.
• Firm Attachment: Ensures the gate remains securely mounted, even under wind or impact.
• Weld-On or Bolt-On Options: Available in designs that can be welded to steel posts or bolted to wood or masonry.
• Galvanized Finish: Most pressed steel hinges are available in galvanized and powder coated finish to prevent rust, making them suitable for outdoor use in all weather conditions.

Aluminium offset rail ends are specialized fittings used in chain link fencing to securely attach the top rail to terminal posts—but with a twist. Here's what makes them unique and useful:

• The aluminum offset rail end is designed to provide a secure and precise connection point for horizontal rails in gate and fence systems.
• Crafted from high-quality aluminum, it offers excellent corrosion resistance, lightweight strength, and long-term durability in outdoor environments.
• Its offset design ensures proper alignment and spacing, allowing for smooth installation and enhanced structural integrity.
• Ideal for both residential and commercial use, it combines functionality with a clean, professional appearance.

Our range of Pressed Right Angle Clamps is acknowledged for their firm grip, corrosion resistance and durability. We offer high-grade Pressed Right Angle Clamp in India, USA, Canada, South East Asia and Middle East and Europe. We are a trusted Manufacturer, Supplier and Exporter of Pressed Right Angle Clamp.

Pressed Universal Clamp is the most demanded form of Pressed Fittings. We are engaged in manufacturing, supplying and exporting high grade Pressed Universal Clamps. These Pressed Universal Clamps are manufactured with fine grade raw material using sophisticated machinery. All the production process takes place in accordance with the international quality standards.

Pressed sleeve clamp provides external end-to end connection, and features a central stopper for correct positioning of scaffold tubes. Pressed Sleeve Clamps offered by us are high in demand for their salient features like smooth finishing, durability and dimensional accuracy. We are an established Manufacturer, Supplier and Exporter of Pressed Sleeve Clamp.

A Pressed Joint Clamp connects two scaffold tubes end-to-end internally. We are a trusted name for offering Pressed Joint Clamps in national and international markets. We manufacture, export and supply Pressed Joint Clamps of unmatched quality. Our Joint Clamps are widely appreciated for their durability and compact design. This is also known as the Joint Pin. Him Overseas is onf of the pioneer Mnaufacturers and Exporters of Pressed Joint Clamp. Our Pressed Joint Clamp are available at market leading prices. For more details you can call us anytime.

We are internationally acclaimed for offering Pressed Joint Clamp and Timber Walling Clamp. These Pressed Timber Walling Clamps offered by us are precisely designed for correct positioning of scaffold tubes. We manufacture, supply and export Pressed Timber Walling Clamps that are known for their durability and sturdy structure.

Our credibility lies in providing sturdily constructed Fence Clamps at reasonable price. These Fence Clamps are precisely designed through effective technology keeping in mind defined quality standards. Smooth surface, high compressive strength and ability to resist corrosion speak highly of our Fence Clamps.

Pressed steel spider clamps are specialized fittings used in Welded Wire Mesh fence systems to fasten hold two panels to a single post. Their unique “spider-like” shape allows for versatile and secure assembly. Here's how they’re typically used:

• Primary Function: Connects two continuous Welded Mesh
• Panels to a single vertical post.
• Provides a strong mechanical connection without welding, making installation faster and more flexible.
• Made from pressed steel for strength and longevity.
• Corrosion Resistance: Often galvanized or powder-coated, these clamps resist rust and environmental wear, ideal for outdoor use.

Pressed steel offset rail ends, available in regular and heavy-duty grades, are vital components in chain link fence systems—especially for connecting horizontal rails to terminal posts with strength and precision. Here's how each type is used:

• Offset Design: Allows the rail to sit slightly off-center from the post, improving alignment and tension distribution.
• Brace Band Compatibility: Works with brace bands and carriage bolts to secure the rail end to the post.
• Heavy-Duty Rail Connection: Designed to handle greater tension and weight from longer spans or added accessories like privacy slats or barbed wire.
• Structural Reinforcement: Provides a more rigid and secure rail-to-post connection in demanding environments.
• Corrosion Resistance Often galvanized or powder-coated, these carriers resist rust and environmental wear, ideal for outdoor use.
• Pressed steel offset rail ends are available in various sizes to match standard rail diameters.