Goa, India
Our Products
When voltage drops too low, equipment motors runs on insufficient power, work harder at lower efficiency. This causes rapid ageing or makes them burn out. The only solution is to get a voltage stabilizer.
Product Description
An Automatic Voltage Stabilizeris an electronic device able to deliver relatively constant output voltage on its own when input voltage and load current changes over time.
Salient Features
1. Electronic circuitry in IC/transistorized control.
2. High quality electromagnetic relays.
3. No output waveform distortion.
4. Stability with temperature change.
5. MS Boxes are powder coated after anti-rust phosphate process/ABS boxes.
6. Low/high voltage cut out with time delay and instantON.
7. Bypass arrangement.
8. Transformer good quality lamination, high grade, high class insulation varnish for reliability and long life.
| Capacity |
Max. Load |
Application |
Features |
0.24 KVA |
1A |
TV's, VCR/Music system |
No cutout, No time delay |
0.24KVA |
1A | ----------------Do--------------- | High cutout |
0.5 KVA 3/1,5 |
2A | Refrigeration up to 250Lit. | H/L cutout, Time Delay / instant on. |
| 07 KVA-3A/2 | 2.5A | Refrigeration above 250 Lit., 1/8HP Compressor | H/L cutout, Time delay / instant on |
| 1 KVA | 4 A | Deep Freezer, bottle Cooler, 5/8 HP Compressor | H/L cutout, Time delay / instant on |
| 3 KVA | 12A | 1 Ton A/C, Refrigeration, water cooler up o 1.5 HP Compressor |
H/L cutout, Time delay / instant on |
| 4 KVA | 16A | 1.5 Ton A/C, Refrigeration unit Compressor up to 2.5 HP |
H/L cutout, Time delay / instant on |
| 5 KVA | 20A | 2 Ton A/C 3-5, HP Compressor |
H/L cutout, Time delay / instant on |
| 5 KVA (Man) / Wide | 16A | House Wiring, Sound system | high voltage cut, Normal / boost voltage selector switch |
Applications
A.C units
Refrigerator
T.V
Audio systems
Video systems
A Spike Suppressor board is a power saving device for computers and other digital equipments encountering inexplicable malfunction or misbehaviors of equipment caused by voltage.
A power connection indicator to indicate wiring faults is also fitted.
Salient Features
1. The Spike Suppressor board clamps voltage transient to safe level by absorbing all spikes and surges.
Technical Specifications
a) Input: 230V AC, 50Hz.
b) Output: 230V AC, 50Hz.
c) Four Output Sockets
d) Fuse Rating: 6A
e) Line Filter: Broadband 42Hz to 450MHz.
f) EMI/RFI Suppression: 40 db
Applications
Digital equipment
HINDUSTAN BIJLEEmanufactures different types of Battery chargers depending on local market demand.
Product Description
Battery chargers manufactured by HINDUSTAN BIJLEEare single/two/three phase chargers with boost/trickle charge, current adjustment, no. of batteries to be charged at a time etc.
Salient Features
It is custom designed to your requirements.
Technical Specifications
a)Input:Single/Two/Three Phase
b)Output:NumberofBatteries/Current
Applications
Battery Charging
The Inverter is a total power solution in digital technology which provides 230V/50Hz power supply to overcome power failures.
Salient Features
Fully automatic, it instantaneously changes over from mains to battery operation in the event of power breakdown and reverts back on mains restoration.
Technical Specifications
a) Input Voltage 140V - 290V
b) Output Voltage 230V -/+ 7% c) Frequency 50Hz.
d) Efficiency 90%.
Applications
Office lighting
Shop lighting
Home lighting
HINDUSTAN BIJLEEpreset DC Power Supply is a custom built power supply unit.
Salient Features
1. It is a preset type power supply unit giving 12V/3A, 24V/5A, 5V/3A, 0-30V/2A output.
2. All output is precisely regulated with low ripple content.
3. The output is electrically floating i.e. neither the -/+ ve terminal is connected to the chassis/body.
Technical Specifications
a) The unit works on 230V AC +/- 10% , 50Hz.
Applications
DC Power source for electronic equipments.
Voltage fluctuations can cause hardware failure, mal-operation, loss or error in processed data. The transient voltage produced by load changes can also be injurious to sensitive circuit components.
Beta Servo control stabilizer is designed to give stabilized output voltage within +/- 3% of the total present output voltage in a few milliseconds.
There are single and three phase servo stabilizers available.
Salient Features
1. High efficiency.
2. Reliable IC control version.
3. Fast response.
4. Wide input range.
5. Transient & Spike free output.
6. No over/under shooting or hunting.
7. No waveform distortion.
8. No effect of power factor and frequency variation.
9. Maintenance-free A.C. Synchronous motor of long life is used.
Technical Specifications
a) Input Voltage: Single Phase - 160 to 270 V
b) Nominal Output: Single Phase - 230V +/- 3%
c) Load on Power: None
d) Output Wave Form Distortion: None
e) Control Circuit: New improved designed ICS & TRAICS etc.
f) High/Low Voltage cutout with time delay
g) Efficiency: Better than 95%
h) Correction Rate: 30 to 40 volts/sec.
i) Motor: 230 VAC Synchronous gearless reversible servo motor with 3.5 kg. cm.
j) Torque at 60 RPM
k) Effect of load on Power Factor - none
Applications
Computers
Medical instruments
Fax and Teleprinter
EPABX & Communication equipments
Industrial process control
Audio/Video systems
Lighting systems
Designed by HINDUSTAN BIJLEE, the Line Voltage Corrector is a manual voltage stabilizer for boosting voltage from 120v onwards.
The Line Voltage Corrector has:
a)Boost/Normal Switch: For incoming voltage of 160 V or below, select switch to Boost Mode.
When incoming voltage is above 160V, select switch Normal Mode.
b)Stabilizer/Bypass Mode Switch: When stabilizer is required to work, select the 2 nos, 2 Way SwitchON(MarkedStabilizer).
When both these switches are keptOFF, Stabilizer will bypass. (MarkedBypass).
Salient Features
1. High voltage cutout
2. Stabilizer bypass
3. Boost/Normal selection switch
4. Step by step increasing/decreasing selector
5. Input/Output voltage monitoring
Technical Specifications
a) Input: 120 - 300 volts.
b) Output: 200 - 240 volts.
c) Capacity: 5 KVA.
d) Main on / Approach indicator.
e) 5A, two-way switch IN/Out monitoring. (Voltmeter & Main on LED.)
f) 15A, two-way switch Boost/Normal switch.
g) 15A, two-way, two nos. switch mode - Stabilizer/By pass selector.
h) 15A Output socket.
i) 8 way rotary switch for fine control of increases/decreases in voltage settings.
Applications
Music system
Lighting load
The Dawn Electronic Switch (a reliable solution for external lighting application automatic light control) is operated by a light sensor.
The external lighting will switchONat dusk and switchOFFat dawn.
The switchingON/OFFis independent for external lighting load, thus saving electricity and money.
Salient Features
1. Long-life. Therefore there is high reliability.
2. Low current drain when external load isOFF.
3. Weather proof.
4. Works on 110/230/415 V Mains supply.
Working Principle
In a manualON/OFFswitch, there is delay while switchingOFFeven after daylight appears. The external lighting power supply remainsON.
This delay causes loss of power. The external light turns on at night and is still on till 6.30am when its day and has to be turnedOFFmanually later say at around 8.30am. This leads to a 2hr delay.
When the loss of power is calculated mathematically:
In a day: 2 hours
Therefore for 26 working days: 2x26= 52 hours of power loss in a month . (A)
On holidays: 6.30 hrs to 18.30 hrs: 12 hours.
Therefore for 4 Sundays: 4x12= 48 hours of power loss in the same month . (B)
If we calculate total loss of power supply: A + B = 52 + 48 hrs. = 100 hrs.
Total Load connected is 1000 watts for external lighting Electricity consumed = Watt x hrs.
Calculating total electricity consumed in a month= 1000 X 100=100 KHW
Commercial rate for 1 unit is: 1 unit = 1 KWH =Rs.3/-
Calculating monetary loss of power supply: 100 KWH x 1 x3 =Rs.300/-
i.e. Rs.300/- is theExtra Powerconsumed when the load connected is 1000 watts. Thus improper switchingON/OFFcauses a loss of Rs.300/- per month. The Dawn Electronic Switch saves you from the trouble of manually switchingOFFthe power supply in the mornings and saves your power bills as everything is automatically done.
Technical Specifications
a) Input Voltage: 110/ 230/415V, 50 Hz./60Hz.
b) Load Voltage: 110/230V/415V, 50 Hz. / 60 Hz.
c) Load Current: Available in different current rating, 6A/16A/32A
Applications
Sign board lighting
Street lighting
Compound lighting
Staircase lighting
The Plastic Jar and Thermocol Cutting machine is used for cutting plastic jar bottles/thermocol sheets in different shapes and sizes.
Salient Features
The heating elements are controlled by a paddle switch and both hands are used for cutting the plastic jar bottle/thermocol sheet to a desirable shape/size.
Technical Specifications
a) Works on 230/110V AC, 50/60Hz.
Applications
Decorative articles
