Post Buy Requirement
HE
Delhi, India
Add Review

Our Products

  1. Hand Tool 11 Products available
  2. Grease Tools 5 Products available
  3. Horticulture & Gardening Tools 8 Products available
  4. Professional Hand Tools 3 Products available
  5. Allen Key 3 Products available
  6. Clamps 3 Products available
  7. Vices 4 Products available
  8. Industrial Jacks, Lifts & Winches 4 Products available
  9. Garden Tools 5 Products available
  10. Sockets 5 Products available
  11. Others 64 Products available

Other Products / Services

Garden Cultivator

We are manufacturers and suppliers of Garden Hand Tools like garden hoe, garden cultivator and other accessories.
View Complete Details

Steel File

  • Length 100
We offer a broad range of steel files manufactured with premium quality of steel. Our variety of steel bars possess sharp parallel cutting ridges on its surface and can easily rub hard surfaces. These steel files are classified according to their shapes, sizes and configuration of teeth. To avoid any injury, steel files are offered with handle.
View Complete Details

Screw Drivers

  • Stock No. 2814
  • Length (mm) 125
  • SCREW DRIVERS SETS  
  • Stock No. 2801
  • Content 5 Pcs Set with handle fitted with neon bulb 6.0x0.8, 3.5x0.5, Philips 1, Poker, Philips 0
We manufacture, supply and export a wide variety of Screwdrivers like two-in-one screwdrivers, screwdrivers sets etc. Screwdriver is a versatile tool that is extensively used for inserting, loosening, tightening and removing the screw. We offer screwdrivers in different sizes & shapes for easy fit.

-Screw Driver blade made from high grade steel.
-Handles from high impact cellulose acetate
-The product is based on IS: 844, DIN: 5265

SCREW DRIVERS TWO-IN-ONE

-Reversible Two-in-one Screw Driver
-Handles from high impact cellulose acetate.
-Blade from high grade Chrome Vanadium Steel, Chrome Plated.
-The product is based on IS: 844

LINE TESTER

-Cellulose acetate Handle with Neon Bulb
-Blade made from High grade Alloy Steel, Chrome plated with insulated sleeve suitable for 220 volts

Stock No. Blade Length Tip Dimension (mm)  
ENGINEERING PATTERN  
2911 50 2.5x0.4  
2913 100 4.5x0.6  
2922 100 3.5x0.6  
2925 150 4.0x0.8  
2824 150 5.5x0.8  
2825 100 5.5x0.8  
2826 250 5.5x0.8  
2827 200 6.5x1.2  
2828 250 4.5x1.2  
2928 250 10.0x1.2  
2829 300 10.0x1.6  
2930 400 10.0x1.6  
ELECTRICAL  
2833 Insulated 200 4.3x0.6  
2934 Insulated 100 5.0x0.6  
2936 Insulated 150 5.0x0.8  
2937 Insulated 200 5.0x0.8  
2938 Insulated 250 5.0x0.8  
2939 Insulated 300 5.0x0.8  
PHILIPS (DIN: 5262)  
2860 150 Philips 0  
2861 300 Philips 1  
2862 200 Philips 2  
       
       
Stock No. Blade Dia (mm) Blade Length (mm) Tip Dimension (mm)
2804 6 200 5.0x0.8 Philips 1
2903 6 200 6.0x0.8 Philips 2
2850 5 200 1 Philips x0 Philips
2851 6 200 2 Philips x 1 Philips
2852 8 200 3 Philips x 2 Philips
View Complete Details

Construction Tools

  • Length 235mm, 9.5Inches
We are manufacturers and suppliers of Construction and Carpentary tools. Our range of Carpentary Hand Tools includes Jack Plane, Bench Plane, etc.Cast Iron Body with Steel Blade.
View Complete Details

Jack Plane

  • Length 235mm
We are manufacturers and suppliers of Construction and Carpentary tools. Our range of Carpentary Hand Tools includes Jack Plane, Bench Plane, etc.Cast Iron Body with Steel Blade.
View Complete Details

Single Open End Slogging Spanner

  • Material Chrome Vanadium Steel / Carbon Steel
  • Finish Burnished
  • SIZE 27, 30, 32, 34, 36, 38, 41, 46, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115, 120 mm.
  • SAE 1.3/16, 1.1/4, 1.7/16, 1.5/8, 1.13/16, 2.3/16, 2.3/8, 2.9/16, 1.3/4, 2.3/16, 3.3/16, 3.3/8, 3.7/16,
Heavy duty spanner with strong profiled handle and durable striking end
Drop Forged Chrome Vanadium Steel Carbon Steel with head set at 15angle
CS The Product is based on IS: 4508, DIN: 133
View Complete Details

Sliding T Handle

  • Material Chrome Vanadium Steel
  • Finish Chrome Plated Polished
Socket Accessories for 12.5mm ( ") Square Drive Hand Operated Sockets

Based on IS: 7975 (Part II), DIN: 3122

   Product No. Product Nomenclature Length (mm)
2082 Sliding Handle 300
2083 Speed Brace 410
2084 L-Handle 210
     
View Complete Details

Extension Bar -2081

  • Material Chrome Vanadium Steel
  • Finish Chrome Plated Polished Heads
Sockets Accessories for 12.5mm ( ") Square Drive Hand Operated Sockets

Based on IS: 7975 (Part II), DIN: 3122

Product No. Product Nomenclature Length (mm)
2082 Sliding Handle 300
2083 Speed Brace 410
2084 L-Handle 210
View Complete Details

Universal Joint, Ratchet Reversible -2086, 2080

  • Material Chrome Vanadium Steel
  • Finish Chrome Plated Polished Heads
Sockets Accessories for 12.5mm ( ") Square Drive Hand Operated Sockets

Swivel Handle : Based on IS: 7975(PartII), DIN: 3122
Ratchet Reversible : Based on IS: 7975(PartII), DIN: 3122
Universal Joint : Based on IS: 7975(PartII), DIN: 3122

Product No. Product Nomenclature Length (mm)
2086 Universal Joint 75
2080 Ratchet Reversible with rubber grip 250
     
View Complete Details

2606 Ball Pein Hammer

  • Material Alloy Steel
  • Finish Burnished
  • Size LBS. 1/4, 1/2, 3/4, 1, 1.1/2, 2, 2.1/2
Avail from us a wide variety of Hammers manufactured by using superior quality of alloy steel. Made in compliance with international quality standards these hammers like ball pein hammer, machinist hammer, sledge hammer etc. are available in different sizes. Customization of hammers is done as per the requirement of the clients.
View Complete Details

2607 Tubular Handle Claw Hammer

  • Finish Burnished
  • Material Alloy Steel
  • Size LBS. 1/4, 1/2, 3/4, 1, 1.1/2, 2, 2.1/2
Avail from us a wide variety of Hammers manufactured by using superior quality of alloy steel. Made in compliance with international quality standards these hammers like ball pein hammer, machinist hammer, sledge hammer etc. are available in different sizes. Customization of hammers is done as per the requirement of the clients.
View Complete Details

2608 Machinist Hammer

  • Material Alloy Steel
  • Finish Burnished
  • Size GMS. 100, 150, 200, 250, 300, 400, 500, 800, 1000, 1500, 2000
Avail from us a wide variety of Hammers manufactured by using superior quality of alloy steel. Made in compliance with international quality standards these hammers like ball pein hammer, machinist hammer, sledge hammer etc. are available in different sizes. Customization of hammers is done as per the requirement of the clients.
View Complete Details

2609 Sledge Hammer

  • Material Alloy Steel
  • Finish Burnished
  • Size LBS. 2, 3, 4, 5, 6, 8, 10, 12, 14, 16
Avail from us a wide variety of Hammers manufactured by using superior quality of alloy steel. Made in compliance with international quality standards these hammers like ball pein hammer, machinist hammer, sledge hammer etc. are available in different sizes. Customization of hammers is done as per the requirement of the clients.
View Complete Details

6502 Wood Working Vice

  • Material Body In Graded Cast Iron With Hardened Steel Jaws Finish : Epoxy Coated, Chrome Plated Rod
  • SIZE WEIGHT
  • 6 2Kg.
  • 8 3Kg.
  • 10 5.5Kg.
  • 12 8Kg.
We specialize in manufacturing wide variety of Vices like wood working vice, bench vice fix base, baby vice, hand vice and many more. These vices are extensively used for grasping or holding something and find their usage in aerospace industry, automotive industry, mechanical labs, machine tool application etc
View Complete Details

6501 Bench Vice Fix Base

  • Material Body in Graded Cast Iron with Hardened Inter Changeable Steel Jaws
  • Finish Epoxy Coated, Chrome Plated Rod
We specialize in manufacturing wide variety of Vices like wood working vice, bench vice fix base, baby vice, hand vice and many more. These vices are extensively used for grasping or holding something and find their usage in aerospace industry, automotive industry, mechanical labs, machine tool application etc.
View Complete Details

6503 Swivel Base Bench Vice

  • SIZE WEIGHT
  • 3" 6.5Kg.
  • 4" 12Kg.
  • 5" 17Kg.
  • 6" 21Kg.
We specialize in manufacturing wide variety of Vices like wood working vice, bench vice fix base, baby vice, hand vice and many more. These vices are extensively used for grasping or holding something and find their usage in aerospace industry, automotive industry, mechanical labs, machine tool application etc.
View Complete Details

6506 Hand Vice

  • Material Body in Malleable Steel
  • Size 3" , 4" , 5" , 6"
  • Finish With Chrome Plated Rod
  • WEIGHT 180 gms., 250 gms., 440 gms., 580 gms.
We specialize in manufacturing wide variety of Vices like wood working vice, bench vice fix base, baby vice, hand vice and many more. These vices are extensively used for grasping or holding something and find their usage in aerospace industry, automotive industry, mechanical labs, machine tool application etc.
View Complete Details

5102 Perfacto Type Oil Can

  • Material Heavy Duty Body with a rigid and flexible spout.
  • Finish All painted oiler, Chrome plated thumb lever
Manufactured using quality steel and in compliance with international quality standards, we offer a wide variety of Grease Guns like lever action grease gun, pistol grease gun, perfacto type oil can etc. Available in different finishes, these grease guns are charged with any of the various types of lubricants but, mostly a thicker and heavier type of grease is used.

Pumps are available in steel & brass.

SIZE
Cat No. Capacity Spout Size
Rigid Flexible
5102-A 200cc 125mm 150mm
5102-B 300cc 125mm 150mm
5102-C 400cc 150mm 175mm
5102-D 500cc 150mm 175mm
View Complete Details

3100 Jack Plane

  • Material Cast Iron Body with Steel Blade
We are manufacturers and suppliers of Construction and Carpentary tools. Our range of Carpentary Hand Tools includes Jack Plane, Bench Plane, etc.

Plane No. Type Length
in mm Inches
No.-3 Smooth 235 9.5
No.-4 Smooth 250 10
No.-5 Jack 350 14
No.-6 Fore 450 18
No.-7 Jointer 550 22
View Complete Details

Forged Right Angle Coupler (EN-74/BS-1139)

  • Type Forged Right Angle Coupler (EN-74/BS-1139)
  • Material Zinc Plated
Scaffolding Fittings-Forged Coupler

Forged Right Angle Coupler (EN-74BS-1139)

Forged right angle coupler is Zinc PlatedPainted to make them virtually maintenance free. Customized colour can also be made possible on demand.
We expertise in manufacturing wide variety of scaffolding fittings like forged right angle coupler, putlog coupler etc. Extensively used in construction industry, these products are designed to ensure higher durability, reliability and resistance to corrosion. Available at the most competitive prices, these products can be customized as per the requirement of the clients.

Item Code Tube Finish
HETL S/F - 1001 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Forged Swivel Coupler (EN-74/BS-1139)

Forged Swivel Coupler (EN-74BS-1139)

Forged swivel coupler is designed for fast and efficient on-site installation. Zinc coating ensures maximum corrosion prevention and therefore requires no maintenance.

We expertise in manufacturing wide variety of scaffolding fittings like forged right angle coupler, putlog coupler etc. Extensively used in construction industry, these products are designed to ensure higher durability, reliability and resistance to corrosion. Available at the most competitive prices, these products can be customized as per the requirement of the clients.

Item Code Tube Finish
HETL S/F- 1002 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Putlog Coupler (EN-74/BS-1139)

Putlog Coupler (EN-74BS-1139)

Forged Putlog Coupler has been carefully designed and press-formed to provide the maximum resistance to movement and high durability

We expertise in manufacturing wide variety of scaffolding fittings like forged right angle coupler, putlog coupler etc. Extensively used in construction industry, these products are designed to ensure higher durability, reliability and resistance to corrosion. Available at the most competitive prices, these products can be customized as per the requirement of the clients.

Item Code Tube Finish
HETL S/F -1003 OD 48.3 mm Zinc Plated/Painte
View Complete Details

Board Clamp Coupler (EN-74/BS-1139)

Board Clamp Coupler (EN-74BS-1139)

Available in different finishes like Zinc Coating (silver yellow passivation) and painted, Our range of Drop Forged Board Retaining Couplers is used to fix scaffold boards to ledgers.

Item Code Tube Finish
HETL S/F - 1004 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Pressed Steel Right Angle Coupler (EN-74/BS-1139)

Pressed Steel Right Angle Coupler (EN-74BS-1139)

Pressed steel right angle couplers are used to connect ledgers or scaffolding tubes. Designed to rigidly secure the scaffold, pressed steel right angle couplers enable scaffolding to tie flat or vertical.

Fabricated in compliance with international quality standards, we offer a wide gamut of scaffolding fittings like girder coupler, pressed steel right angel coupler, sleeve coupler, joint pin etc. Sturdily constructed, our range of scaffolding fittings is designed according to its usage in the industry.

Item Code Tube Finish
HETL S/F - 1005 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Pressed Steel Swivel Coupler (EN-74/BS-1139)

Pressed Steel Swivel Coupler (EN-74BS-1139)

Pressed steel swivel couplers are single unit design having easy to replace bolts. These swivel couplers are mainly used for bracing to allow tubes to be connected at any angle.

Fabricated in compliance with international quality standards, we offer a wide gamut of scaffolding fittings like girder coupler, pressed steel right angel coupler, sleeve coupler, joint pin etc. Sturdily constructed, our range of scaffolding fittings is designed according to its usage in the industry.

Item Code Tube Finish
HETL S/F- 1006 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Girder Coupler (AS-1576.2)

Girder Coupler (AS-1576.2)

In order to fasten scaffold tubes to girders and other steel sections, a specialized fitting with a high degree of a versatility is needed. To fulfill this requirement, we offer Girder Couplers that have been specifically designed for attachment to either horizontal or vertical flanges.

This coupler is highly effective, as it enables the fittings to be bolted to the girder first, leaving both hand free and secure the tube. We recommend these couplers must be used in pairs.

Item Code Tube Finish
HETL S/F - 1007 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Sleeve Coupler (EN-74/BS-1139)

Sleeve Coupler (EN-74BS-1139)

The sleeve couplers are the heavy duty couplers used for rapid connection. These sleeve couplers have a central baffle plate for correct tube positioning and one side unlocking safety.

Item Code Tube Finish
HETL S/F - 1008 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Joint Pin (EN-74/BS-1139)

Joint Pin (EN-74BS-1139)

Sturdy joint pin couplers are used for axial connection of scaffolding tubes, when they are in compression stage. These joint pin couplers are designed as per international standards.

Item Code Tube Finish
HETL S/F - 1009 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Fencing Coupler (AS-1576.2)

Fencing Coupler (AS-1576.2)

These fencing couplers are engineered to be light in weight and economical in usage. These strong and reliable fencing couplers are provided with zinc coating.

Item Code Tube Finish
HETL S/F - 1010 OD 48.3 mm Zinc Plated/Painted
View Complete Details

Vertical K-Stage System

K-Stage System

We offer wide variety of K-Stage System in various dimensions, polishes and finishes. Our range of K-stage system includes tie bar, brace, transom and many more. All these products are highly durable, reliable and resistant to rust as well as corrosion.

Vertical Standard

Available in various dimensions and weight, these systems provide quick fastening with firm clamping action making the joint rigid. These are available in painted and power coated finish.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F- 2001 1 6.25 Painted/Power coated
HETL S/F- 2002 2 11.75 Painted/Power coated
HETL S/F- 2003 2.5 14.5 Painted/Power coated
HETL S/F- 2004 3 17.23 Painted/Power coated
View Complete Details

Ledger

Ledger

Ledgers are designed to be inserted into the pressings on the standard spaces to the required grid sizes in regular scaffolding or for providing support slab system.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F - 2005 1.2 6.25 Painted/Power coated
HETL S/F - 2006 1.8 7 Painted/Power coated
HETL S/F - 2007 2.4 8.8 Painted/Power coated
View Complete Details

Transom

Transom

Transoms provide safe mid-bay support for scaffolding boards. In addition, transoms also hold the ledgers in the jaw sections, preventing the bending of platform boards.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F - 2008 0.8 5.8 Painted/Power coated
HETL S/F - 2009 1.2 9.65 Painted/Power coated
HETL S/F - 2010 1.8 13 Painted/Power coated
View Complete Details

Brace

Brace

Scaffolding tubular braces have hydraulically flattened end with punched hole, having wedge fittings welded to each end, the braces have rust resistant finish.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F - 2011 1.7 7.4 Painted/Power coated
HETL S/F - 2012 2 8 Painted/Power coated
HETL S/F - 2013 2.5 10.7 Painted/Power coated
HETL S/F - 2014 3.6 13.1 Painted/Power coated
View Complete Details

Tie Bar

Tie Bar

To suffice the needs of construction industry, our Tie bars are made from steel angles that have a dowel at both ends. This helps in connecting the two and three board platform brackets to support the steel planks.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F - 2015 1.2 2.8 Painted/Power coated
HETL S/F - 2016 1.8 4.15 Painted/Power coated
HETL S/F - 2017 2.4 5.55 Painted/Power coated
View Complete Details

One Board Bracket

One Board Bracket- Item Code : 2018

Single board brackets are specially designed sections for placing battens. These brackets have provision of forged blades to be fitted with Cuplock standards by cup joint.
View Complete Details

Two Board Bracket

Two Board Bracket- Item Code : 2019

Double board brackets are used to support the drop beams within the regular slab support grid, capable of receiving adjustable jacks. These brackets eliminate the need for the beam bottoms propped up from the ground.
View Complete Details

Three Board Bracket

Three Board Bracket- Item Code : 2020

Triple board brackets are used to provide support to beam framework with provisions for accepting jacks or fork heads. These board brackets have varying load carrying capacity.
View Complete Details

C-Lok System - Vertical/Standard

C-Lok System- VerticalStandard

We expertise in offering wide variety of C-Lok System (cuplock system) like ledger blade end, top cup & bottom cup etc. Extremely light weight, our product range is high in performance, requires low maintenance cost and is available at cost-effective prices.

Heavy duty cuplock systems are made of malleable cast iron and designed to ensure trouble free long term usage. The cup joints are welded at various intervals for different requirements.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F - 2021 0.5 2.5 Painted/Power coated
HETL S/F - 2022 1 4.85 Painted/Power coated
HETL S/F - 2023 1.3 6.15 Painted/Power coated
HETL S/F - 2024 1.5 7.65 Painted/Power coated
HETL S/F - 2025 1.8 9 Painted/Power coated
HETL S/F - 2026 2 10.65 Painted/Power coated
HETL S/F - 2027 2.3 11.4 Painted/Power coated
HETL S/F- 2028 2.5 13 Painted/Power coated
HETL S/F - 2029 3 15.85 Painted/Power coated
View Complete Details

C-Lok System- Ledger

C-Lok System- Ledger

Ledgers have forged blade ends so that they can fit in the standard cup joints. Besides, these ledgers are used in variety of size combinations to suit various loading conditions.

We expertise in offering wide variety of C-Lok System (cuplock system) like ledger blade end, top cup & bottom cup etc. Extremely light weight, our product range is high in performance, requires low maintenance cost and is available at cost-effective prices.

Item Code Size (Mtr.) Weight (Kgs) Finish
HETL S/F - 2030 0.6 2.5 Painted/Power coated
HETL S/F - 2031 0.9 4.85 Painted/Power coated
HETL S/F - 2032 1 6.15 Painted/Power coated
HETL S/F - 2033 1.2 4.75 Painted/Power coated
HETL S/F - 2034 1.3 5.25 Painted/Power coated
HETL S/F - 2035 1.6 6.2 Painted/Power coated
HETL S/F - 2036 1.8 7 Painted/Power coated
HETL S/F - 2037 2.5 9.5 Painted/Power coated
View Complete Details

Top Cup & Bottom Cup

Top Cup & Bottom Cup

Made of heavy duty malleable cast iron, our top cups are designed to ensure trouble free long term usage. These can be made available in two versions i.e:
-Top Cup three lug
-Top Cup four lug

We manufacture and export Bottom cups that are pressed from high quality steel and are welded on verticals.

Item Code Material Weight
HETL S/F - 2038 SG Cast Iron 0.220-0.250 Kgs
     
     
Item Code Material Weight
HETL S/F - 2039 SG Cast Iron 0.430-0.450 Kgs
View Complete Details

Ledger Blade End

Ledger Blade End

Scaffolding ledgers' blade ends are drop forged from premium quality, non-alloy steels. These blade ends are extremely strong enough for providing long service life.

Item Code Material Weight
HETL S/F - 2040 MS 0.220-0.250 Kgs
View Complete Details

Heavy Duty Prop

Heavy Duty Prop

Heavy duty props are ideal and most economical for supporting all kinds of steeltimber frames for concrete slabs, beams and columns in general building construction and repair work.

Item Code Close Ht./Open Ht. (Mtr.) Weight (Kgs) Finish
HETL S/F - 3004 1.08/1.83 14 HDG/Painted
HETL S/F - 3005 1.65/2.50 17.2 HDG/Painted
HETL S/F - 3006 1.98/3.35 20.64 HDG/Painted
HETL S/F - 3007 2.60/3.60 22.88 HDG/Painted
HETL S/F - 3008 3.30/5.00 28.6 HDG/Painted
View Complete Details

Light Duty Prop

Light Duty Prop

Light duty props support shuttering and centering of steel and timber frameworks. Available in different sizes and outer dimensions, props have rolled threads.

Item Code Close Ht./Open Ht. (Mtr.) Weight (Kgs) Finish
HETL S/F - 3009 0.25/0.50 3.3 Painted
HETL S/F - 3010 0.50/0.80 4.1 Painted
HETL S/F - 3011 0.70/1.30 5 Painted
HETL S/F - 3012 1.00/1.80 6 Painted
HETL S/F - 3013 1.60/2.80 10 Painted
HETL S/F - 3014 1.82/3.35 11 Painted
HETL S/F - 3015 2.45/4.00 11.8 Painted
HETL S/F - 3016 3.00/4.60 13.5 Painted
View Complete Details

Heavy Duty Prop Nut (Light Weight)

Heavy Duty Prop Nut (Light Weight) - Item Code : 3018

Prop nuts are available malleable casted and are light weight and heavy duty. These prop nuts are available in threaded & non threaded specifications with black, galvanized or painted finish.
View Complete Details

Base Plate With Pipe

Base Plate with Pipe

These base plates have non-adjustable base and are used for load distribution of a scaffolding installation. The base plates are offered in various size, pipe diameters and finish.

Item Code Plate Tube Finish
HETL S/F - 4024 150x150x6mm 48.3x100mm HDG/Zinc Plated/Painted
View Complete Details

Humble Head

  • Item Code Finish
  • HETL S/F - 4025 HDG/Zinc Plated/Painted
Humble Head

Available in various dimensional specifications, these humble heads are offered in different finishings like plating and Painted.
View Complete Details

Socket Plate

  • Item Code Finish
  • HETL S/F - 4026 HDG/Zinc Plated/Painted
Socket Plate

We offer a comprehensive range of socket plates that adds more stability to scaffold structures, with a base plate. These plates can also be used with the leveling jack with socket end.

Manufactured in compliance with international quality standards, we offer a broad range of Jacks, Base Plate & Drop Head like socket plate, drop head painted etc., in multiple designs and specifications. We ensure delivery of consignment hassle free within stipulated time frame.
View Complete Details

Shorex Flat Plate

  • Item Code Finish
  • HETL S/F - 4027 Zinc Plated/Painted/Power Coated
Shorex Flat Plate

Flat plates can be used with a wide range of scaffolding accessories. These flat plates are available in various materials with different finishings.
View Complete Details

Drop Head Painted

  • Item Code Finish
  • HETL S/F - 4028 Painted
Drop Head Painted

We offer high quality Dropheads that come with nuts and bolts. These are designed to perfectly fit on standard props or adaptors. Our dropheads not only offer proper support to panels beams but are also re-usable. This can be done once the curing period of the concrete slab is over, which is usually 3-4 days.
View Complete Details

HDG Drop Head

HDG Drop Head

HDG drop heads are conveniently struck and remain in position, supporting slabs. The decking beams are dismantled and reassembled, ensuring optimum utilization of the framework.

Item Code Finish
HETL S/F - 4029 HDG
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sanjiv Kaplish (HINDUSTAN EVEREST TOOLS LIMITED)
  • 46, DOHIL CHAMBER,5TH FLR, NEHRU PLACE, NEW DELHI-110 001 - 110019, India
  • Share us via