Capacitor #3733705

MEA Series capacitors are constructed with metallized polyester film dielectric, tin plated copper leads and tape wrapped by PET film with epoxy sealing. Features: Self healing properties Non - inductive constructionHigh reliability and excellent long term stabilitySmall Size

Construction:MKT11 Capacitors are wound with Metallizedpolyester film as dielectric and tinned copperwire and FR grade epoxy coating.Features: Self healing propertiesNon - inductive constructionLow Dissipation Factor and highInsulation ResistanceHum Free functioning . Application: In step- type, fan speed regulators.

Leads:Axial, Copper Wires, Solder Plated, Pressure Contacts.Markings:Capacitance, Rated Voltage, Type. Dissipation Factor (tan d):= 30, 000 M Ohms. for C =10, 000 Sec. (M Ohms x mF) for C > 0.33mF.

RC networks are used across the coils of the contactors, to protect them from the undesirable transient voltages that are generated during switching off of contactor coils. The induced transient voltage surges can be several times the rated voltage of the coil and can damage the coil of the contactor. These induced voltages also have a high frequency of the order of several KHz and generate noise. RC networks connected in parallel to the coils of the contactors effectively suppress the surge voltages by absorbing the energy contained in the transients and safely discharging them. The RC networks also filter out the noise generated by the transients.

Oil Impregnated for Good Corona Resistance, Dielectric - Polypropylene, Electrode - Double Metallised Paper, Coil - Non-inductively wound, mineral oil impregnated, Construction - Aluminium can + Blue PVC Sleeve, stud insert moulded plastic end caps , Markings - El-Ci-Ar logo, Capacitance, Voltage, Type. Dissipation Factor

A Press shop tool room plating unit is located at Gokul road and a fully integrated capacitor manufacturing unit located at Tarihal estate. The current capacity is 20 million with a total installed capacity 40 million comprising of state of the art machinery imported from USA and JAPAN. The entire manufacturing process done under climate controlled conditions. Our film capacitors use oil impregnation technology which is a homegrown technology and perfected for mass manufacture. Our film capacitors have a lot of advantages over metallized capacitors which have been listed below. 1) Higher dvdt rating, higher peak current capacity, higher insulation resistance over metallized capacitors. 2) Oil impregnation of film capacitors acts as a coolant at higher temperatures and prevents breakdown. 3) Mode of failure in film capacitors is in short circuit mode versus open circuit mode for metallized capacitors

Features:Oil Impregnated, Aluminium Can Encased, Dielectric - Polypropylene, Electrode - Double Metallised Paper, Coil - Non inductively wound, Extended Foil, Leads - Fast on terminals, weld jointed to coil, Construction - Aluminium can with a threaded stud for mounting.Dissipation Factor

Features: Non-Inductive constructionSelf- Healing propertyHum free functioningLow Dissipation Factor and high Insulation ResistanceSpecial Metallized Polyester Film with Internal Fuses for Safety FeaturesCapacitance Values: 1F to 4.7F in 5% and 10% tolerances Test Voltage: 1.6 x Vr for 2 seconds.Fire Retardent Encapsulation

Construction:MPP Capacitors are wound with Metallized polypropylene film as dielectric and copper clad steel wire and epoxy coating.Features: Self healing propertiesNon - inductive constructionLow Dissipation and High Moisture resistance.

BORGER Capacitors have also found wide acceptance in applications wherever spark ignition combustion is employed. Stationary engines, portable gensets, knapsack sprayers, outboard motors and assorted other units that have varied industrial, commercial, agricultural and marine applications have depended on BORGER Capacitors for their

Technical specifications of El-Ci-Ar MKP-75 0.47?F600 V AC and 0.5 ?F 1000 V AC oil filled capacitors.Capacitance Tolerance: 10%, 10%. Rated Voltage UN:1400 V, 850 V. Periodic Voltage Umax:1800 V, 1050 V. Time constant between terminals:> 3000s, > 3000s. Climatic category:-25C to + 70C, -25C to + 70C.