Sanitizing Tunnel is designed to disinfecting personnel by passing through disinfectant passageways, which sprays disinfectant and sanitizer to kill 99.999% of viruses, bacteria, fungi, molds&spores.

Sanitizing Tunnel Usages

Sanitizing Booth is a tailor-made product which can differ in shapes & dimensions depending on site measurement & space constrains. This can be widely used at entry/exit of public places as follows

•  Hospitals entry & exits, specially at ICU Entry & exit doors for Medical staff safety
•  Communities main doors
•  Airports & railway stations
•  Factories, supermarkets, shopping malls, construction sites
•  Institute & Schools Main doors
•  Banks & hotels

We specialize in customized designed equipment.

Sanitizing Tunnel Working Principle

• A self-preventive modular chamberwith human sensors designed to deliver disinfectant on every individual passing through it
• The Sanitizer Tunnel works through a central disinfectant mist generation and distribution arrangement located above the internal chamber & on the side walls which ensures that the operator is fully sterilized before entering any premises
• The system is supplied with sanitizing nozzles to drop suitable size curative particulates which are placed such that mist spray will be possible on and all around the person passing through it
• The system will operate for a duration as per the person entry & exit inside the unit. During the operation the operator is expected to gently rotate in the central space with his/her elbows raised and away from his body to get best results of system
• During this misting cycle, the operator twists his/her body and moves his/her arms up and down to reduce any folds in the clothes and to help ensure uniform coverage. After a person exit the system, the sanitizing cycle automatically shuts off.
• These are both-way rooms. In Sanitizing shower, highly pressurized disinfectant is spread on suit of person to drain the contamination. This prevents passing out of hazardous viruses from being circulating in different areas while person movement process.
• Sanitizer Tunnel provides gentle wetting of all exposed surfaces of the operator's garment, digesting hazardous particulate.
• Disinfectant Consumption is 0.5 liter per minute misting cycle.

Standard Features

Spray Nozzle for fine mist disinfectant spraying during operation having semi hollow cone spray pattern with droplets size 40-70 microns with spray angle of 60° dense pattern/90° non dense pattern at around 5-7 bar pressure

• Single wall Construction with covering piping
• Automatic on/off operated with personal movement sensors
• Self -Priming Monoset Pump for providing jet flow of disinfectant to take care of flow requirement
• Openable & Lid covered plastic tank with 30 ltrs. capacity for disinfectant storage
• Chemical sanitizer liquid to be arranged by the buyer as per Government Norms.
• In deluxe model - Solenoid valve for disinfectant liquid controlling during cycle.
• Flexible sheet covering on sides & top for better luminance inside the unit
• Drain in water tank for tank cleaning
• Low & High Level Indication for disinfectant Storage inside tank
• Specifications subject to change without prior notice as the per government norms

Site Requirements

• The unit will be providedwith 5 mtr. Long cable. Any cabling required between unit to the electrical control panelwill be in Client's scope
• Concealing of electrical cabling (if any required) is in Client's scope.
• Client to provide the location of the control panel on the service panel nearwater tank
• Utility Connection and Electrical power supply will bein client's scope
• Cleaning Utility, Waste material disposable will be in client's scope
• LED light for providing 400 LUX

Models Documentation

• Operational & maintenance manual
• @ extra if required
• Design Qualification
• Installation Qualification
• Operational Qualification
• As Built Drawing & Electrical Wiring Drawing

Options and Accessories available at an extra cost

• Temperature measurement of infrared ray & audio/visual alarmwith following functions
• Key data such as Register attendance & travel record
• Statistical analysis chart of body temperature & personnel
• Facerecognition & Id check
• Records consultation of personnel passing
• Records consultation of personnel passing
• Abnormal historic data tracking
• Real timewarning of people gathering
• High temperature alarmthermometry record
• Stranger Alert

Standard Models

A) Model HMG ST Deluxe: Sanitizing Tunnelwith SS 304 frames, SS 304 single skin sheet for ceiling. It is provided with a raised SS 304 perforated floor with drain outlet. There will be 4mm thick Acrylic sheets on both side walls for covering and SS Nozzles. Std. Size : 2400mm (L) x 1200mm (W) x 2400mm (H)

B) Model HMG ST Medium: Sanitizing Tunnel with PPGI panels of 50mm thickness for the top and both side walls and plastic nozzles. Std. Size : 1800 mm (L) x 1000mm (W) x 2100mm(H)

C) Model HMG ST Eco Series: Sanitizing Tunnel with powder coated MS pipes, flexible sheet for covering the top and both side walls and plastic nozzles. Std. Size : 1200 x 1000 x 2100 mm(H)

Standard Supplies: A 20 30 litres PVC tank, connecting hoses and cables, misting nozzles, auto sensor for man entry/ exit and a 1/2 HP pump.

Incubator is an important laboratory device that offers a contaminant-free, controlled and safe environment for cell and microbiological cultures. It works by regulating humidity, oxygen (O2) & carbon dioxide (CO2 ) percentage and temperature to create optimal condition for storage and growth of different bacterial cultures. We, here at HMG India, specialize in standard and customized Bacteriological Incubator, so as to meet the unique demands of professionals for specialized and individual researched application in engineering labs, clinical lab, QC, food processing, pharmaceutical lab, chemical lab and microbiological determination.

Our superior quality double-walled incubators effectively maintain temperature consistency and integrity of sample, ensuring accurate results every time! The incubators are equipped with innovative features including advanced sensors, modern convection technology, automatic temperature alarm and robust decontamination systems. Protection against over-temperature is ensured via safety thermostat, while the digital keypad can be used to calibrate temperature controller with reference to thermometer. For better use and constant support, the bacteriological incubators have 4 load bearing positions.

What are the specifications?

• STD Model Inner Chamber has Stainless Steel (SS 304)
• STD Model Outer Section is coated with GI Powder
• GMP Model Inner Chamber has Stainless Steel (SS 316)
• GMP Model Outer Section comes with Matt Finish SS 304 Gr

How is the standard design?

• The exteriors are constructed from SS and/ or have Prime GI powder coated finish
• The interiors are constructed from SS (SS 304 or SS 316) grade.
• The outer double metallic door is 100% insulated and fitted to the model using standard set of hardware
• Additional provision is also present for adjustable mesh and perforated trays.

What are the optimal features?

• Microprocessor enabled with auto tune PID temperature controller for process value and set value to control temperature precisely.
• Motorized air blower that blows the air from different sides to the working chamber.
• High Quality SS Tubular mounted either on the backside or the sidewalls of the inner chamber for uniform heating.
• Load flexibility ensured thanks to the built-in four castor wells, for equal distribution of weight.
• Temperature range is 5oC for ambient to 60oC, with accuracy of +/- 0.5oC or better

What are the optional accessories?

• P.I.D Controller with PC & Printer Interface
• Safety Blind Controller
• Documenting options

Biological Oxygen Demand (BOD) incubators are popular low temperature incubators suitable for growing yeast and mold. They are designed to maintain a minimum temperature of 200C, which is essential for BOD determination. BOD tests are used to determine relative oxygen (O2) requirement of microorganisms in effluents, polluted water and wastewaters. HMG India's potent BOD incubator offers controlled conditions for storage of vaccines, sensitive cell cultures, seed germination, serum incubation and culture of bacteria.

In recent times, strict enforcement of environmental measures by regulatory agencies has forced several agencies to test and treat the wastewater, and this can be simplified with our exceptional range of BOD incubators. Apart from wastewater management, industries such as research laboratories, pharmaceuticals, beverages and agriculture can also benefit from the use of BOD incubator.

What are the specifications?

• Inner Stainless Steel (SS) Chamber
• Outer CRCA/ GI Epoxy Coat Finish
• 3inch Thick Glass Wool Insulation

How is the standard design?

• The outer core is made from CRCA / GI and coated with EPOXY powder for seamless finish
• The inner chamber is made from 100% highest grade S. Steel
• The doors of the inner chamber are created from tempered glass to reduce contamination and eliminate crevices
• High grade PUF insulation in situ form to achieve stable temperature

What are the features?

• Full-view plexi-glass inner door to inspect and monitor the specimens present in the inner chamber without disturbing process temperature.
• Forced air circulation (FAC) by coaxial blower, that maintains preferable temperature, homogeneity and uniformity
• Microcontroller cum indicator with PID based system for accurate calibration of temperature to required settings.
• Illumination lamp equipped in the chamber for better visibility
• Portability of BOD incubator made easy, thanks to the mounted castor wheel
• High Pressure in-place insulation between the inner chamber and the outer wall for minimal loss of heat.
• Temperature range of 60°C and the ambient temp is +50°C
• ISI marked hermetically sealed compressor coupled with motor, fan blade and electrical accessories for rapid cooling.
• Finned SS Tubular heaters that facilities in uniform distribution of heat around the inner chamber.

What are the optional accessories?

• Stainless Steel (SS) removable trays
• Safety Thermostat
• Strip Chart Recorder
• Chamber illumination powered by U.V. or white florescent lights
• 0 to 24 hours cyclic time for regulating illumination in chamber

HMG India's incubator portfolio provides an amazing range of incubators with years of expertise and innovation for optimal growth of cells by regulating the in vivo conditions and decreasing experimental variability. Orbital shaker incubator is a standard laboratory equipment preferred for research involving incubations, homogenizations, fermentations, biochemical and chemical reactions like cultivating the bacteria cultures along with tissue and enzyme studies.

Our orbital shaker incubators specialize in gentle mixing & vigorous shaking, while maintaining a consistent temperature of upto 700C. Enabled with direct-drive mechanism, the incubator supports platform motion for stable and reliable operation. All the units offered by HMG India utilize state-of-art microprocessor and deliver RS 232 interface for monitoring and controlling the operations of orbital shaker incubator via PC.

What are the specifications?

• S. Steel Platform to Hold 100ml, 150ml, 250ml, 500ml & 1000ml Conical Flasks
• Horizontal Orbital Motion in Variable Speed of 50 to 250/400 RPM
• Pressure Switch with Mechanical Timber

How is the standard design?

• The outer wall is made from mild steel sheet and is powder coated for matt finish.
• The inner chamber is made of stainless steel (SS) which has strong resistance against corrosion.
• The shaking motion is orbital rotations per minute (RPM) and comes with multiple speed controls upto 400 RPM
• The chamber holds a spring loaded stainless steel lotus clamp for holding conical flasks for varied sizes.

What are the optimal features?

• Available in different designs to meet the challenging functional requirements of research laboratories.
• Micro-controller based temperature control system backed by PID sensor for effective regulation.
• Optimal distribution of heat throughout the interiors of the chamber by fan circulation
• Exact and fast temperature settings for accurate reproducibility values, such as incubation time, shaking frequency and temperature.
• In-built cooling coil facilities application below the ambient temperature of orbital shaker incubator
• Robust and silent shaking mechanism, that begins with a gentle start-up to ensure the composition and integrity of samples is not affected.
• Fluorescent light present in the inner chamber offers daylight stimulation
• Frame is capable of accommodating 2 shaking trays at one time.

What are the optional accessories?

• Illumination in the chamber powered by U.V. or tube light
• Electronic timer
• Cyclic timer in 0 to 24 hours cycle for stimulating illumination
• Orbital shaker with Humidity Chamber

Normally, an incubator is used for the healthy growth of microbiological cultures. HMG India manufactures and supplies carbon dioxide incubators for conducting biological experiments in laboratories. These incubators keep the cells at an optimum temperature, relative humidity, and pH, for ensuring steady cellular growth over a required period. The concentration of carbon dioxide can be regulated inside this equipment, for adjusting the speed of cell growth.

HMG has manufactured CO2 Incubator with some beneficial qualities, for aiding scientists working on cellular biology. This equipment is very effective in conducting therapeutic treatments and research works on stem cells. Thus, many pharmaceutical companies also need to use this device for discovering new medicines. The performance of this incubator is responsible for the expansion of cultured cells. Thus, all the physical conditions should be changed when a new sample of cells is introduced inside this device.

Technical features of HMG CO2 Incubator

• HMG manufactures this type of incubator in three models; namely OR Autoflow, US Autoflow, and DH Autoflow, based on the structural specializations of these scientific devices
• This carbon dioxide incubator is provided with a microprocessor that helps in regulating the CO2 concentration within this equipment. Temperature, humidity and other factors are also controlled with this microprocessor.
• An LCD or LED display board is associated with the microprocessor of this incubator, on which the user can see the levels of temperature, CO2 concentration, and other necessary factors.
• The entire interior body of the incubator is made of stainless steel, which is resistant to rust formation. There are very few sharp edges or grooves where there may be a risk of the growth of germs that can hamper cellular growth.
• Normally, the range of carbon dioxide concentration varies to 20% and the accuracy of this CO2 gas is 0.1%.
• The temperature of the incubator is also regulated by providing a controlled amount of heat directly inside the equipment. Some models are provided with a water jacket covering the entire outer body of the incubator, for keeping the interior cool as per the required temperature.
• The interior cavity of this incubator has a number of shelves, on which the trays of cultured cells can be placed safely.
• The air flowing inside the incubator passes through a sterile filter and then uniformly distributed throughout the interior space. So the CO2 present in this air reaches evenly to all the plates containing cultured cells.

This carbon dioxide incubator is now widely supplied by HMG to many medical research centers, for tissue engineering, vitro fertilization process, and diagnostic studies.

When handling hazardous volatile substances, radioactive materials, aerosols or dusts, protection should be the top priority, and thus these operations must be performed in a fume chamber. HMG India's highest rated Fume Chambers not only achieve the best results in every relevant test, but even deliver ergonomic benefits to the user that makes the work processes safe and easier.

Our line of fume chambers exemplifies the principles of aerodynamics and sound engineering at all the sash openings. It comes with durable stainless steel (SS) linear inner chamber with uniquely designed shelving system to accommodate large samples and maximize the fuming capacity even while using low level of Alpha & Beta particles. It also offers containment performance equivalent to a low velocity fume chamber for exceptional outcome. We provide different kinds of MOC, ranging from metal, wood and plastic to meet the specific application requirements of our clients.

What are the specifications?

• Double Skin Sandwich Construction
• Outer Metallic Prime GI / CRCA Coated with Epoxy Powder
• Exteriors Laminated with Wooden Marine Plywood & Seasoned Teakwood Frame
• 5mm Thick Dully Framed Safety Glass Operated by Steel String
• PVC/PP Table Top

How is the standard design?

• The outer body is constructed from a metallic prime GI/ CRCA with epoxy powder coated finish
• The interiors are made from brushed stainless steel (SS) of grade 316/ 316L/ 304, and lined with a cement sheet dully epoxy coating.
• The table work space is made from S. Steel / Laminate / Jet Black Granite / PP FRP / Alkali Resistant / PP GL surface to create a strong workspace.
• The models having under bench come with a provision of storing LPG cylinder, and have a middle shelf and shutter.

What are the optimal features?

• Microprocessor based control automates the fuming chamber for maximum performance without any disruptions.
• Temperature sensor to monitor the temp in the interiors and alarm when given limit value exceeds.
• Ceramic, stainless steel, PVC sink along with a water line operated via a Swan neck tap.
• Programmable sockets with electrical points of 5 / 15 Amp , along with remote control knobs for LPG / Water / Vacuum Lines (optional)
• Low noise centrifugal blower made from PPGL having FRP lining with balanced polypropylene impeller powered by Single Phase / Three Phase standard electric motors.
• Ducting of 3mm thick or 6mm thick PPGL lined that supports various fittings such as Reducers, Bend, Motor Guard, Canopy, Flanges and more

What are the optional accessories?

• Under Bench Storage Space
• Base Cabinetry
• Additional Electrical Outlets

HMG Stability Test Chambers are developed as a result of intensive R & D and of more than 2 Decades experience. The Chamber confirms to International Standards and is manufactured as per GMP Regulations. The Company is committed to offer services for Chamber Calibration, Validation, and to comply IQ, OQ & PQ Protocols.

HMG Chambers are specially designed to carry out stability and shelf life test on drug and drugs substance according to ICH guidelines, which are adopted by the Industry and implemented, by Food and Drug administration.

hmg laboratory fume chamber / hood:

model:                  3 /4 /5/ 6 feet standard fume hood with base cabinet or without base cabinet.

Laboratory Incubator

Viscosity is primarily used to denote the degree of fluidity of a particular fluid. Higher the rate at which a liquid flow, lower is the viscosity exhibited by it. The consistency of the liquids often helps to determine, quality, purity and quantity of a particular fluid. Different fluids exhibit different levels of viscosity. For example, water is a far less viscous liquid as compared to Mercury at room temperature.

Viscometer Water Bath by HMG India:

One of the most prestigious companies of India, HMG, is offering viscosity bath. HMG is one of the largest producers of Viscometer Water Bath. Their product has found various applications across various industries. Oil, lubricants, petrochemical are few of the several industries that are using this product for their smooth functioning. These water baths are fully insulated and have a double-layered design to improve the insulation that they offer. This insulated setup reduces the operational cost drastically. While the inner layer of insulation is lined with high grade stainless steel, the outer layer is epoxy powder coated. Such coating helps prevent the setup from developing rust and resisting scratches.

Setup of a Viscometer Water Bath:

• Viscometer has double walls with an inner chamber and an outer chamber.
• There is insulation in between layers to prevent the loss of heat.
• The inner chamber is made up of stainless steel
• The outer chamber is coated with G.I. Powder. This coating is known to protect the apparatus from external scratches and rust.
• Uniform temperature is maintained with the help of stirrer or by using circulatory pumps.
• Special grade immersion heater is used to maintain a uniform supply of heat.
• Glass window is yet another important aspect. The reinforced glass facilitates viewing.
• There are 3 distinct capacities that are offered by HMG India- 6/9/12 as per the requirement of the customer.

Technical Characteristics:

• Filled with refrigerants and not CFC, that is known to be harmful to the environment.
• Thermal loss is minimal due to the presence of insulator in the middle of layers. Thermal isolation is effectively achieved as well.
• There are monitors present that make the job of tracking and keeping temperature readings, easy for the user.
• There is a microprocessor that controls temperature.
• Visual alarm system is yet another effective feature that helps notify the user on attainment of the highest or the lowest temperatures set.
• They offer a temperature range from 0 to 100 degree celcius.

Digital proportional controller Micro controller for precision control of Temperature within + 0.10C. Oil bath with higher temperature upto 3000C also available. Electrical Stirrer Circulatory pump for uniformity of temp. within bath. Booster heater provided

Environmental Test Chamber