Noida, Uttar Pradesh, India
Our Complete range of products are Separatory Funnel, neonatal incubator, Baby Incubator, glass slabs and Sieves.
This non-corrosive Separatory Funnel Holder has an open front thereby providing a clear view of the solution and permits unobstructed placement of the Separtory Funnels. Two tapered wedges are provided to ensure a firm grip on rods having diameters of 12″ or 38″.
The temp controlled unit is operated by advanced micro computer technology.The three digital display indications provide the Set Temperature, Air Temperature and Skin Temperature.Two function control modes provide the clinician more flexibility while optimizing the thermal environment.In addition the skin temperature is display is larger than the setair temperature display. The removable heater and control unit make it easy to clean and service.Full visibility and accessibility of the baby is provided by the designed of acrylic hood.A full complement of alarm provides safety convenience, with both audible and visual indicators:Probe Failure Power FailureHigh Temperature Low TemperatureSkin Temperature display can be converted from C to °F by push of a button.A big LCD Is provided for more specific information and visualization of the heater power in different modes.The High and Low Temperature alarm setting can be adjusted according to the patient condition. Humidification is provided with the help of two water trays provided at the back of the unit. Three side trays provided at the bottom of the unit to keep consumables.The unit rests on four big castors with brakes in the front castors.
The three digital display indications provide the Set Temperature, Air Temperature and Skin Temperature. Two function control modes provide the clinician more flexibility while optimizing the thermal environment. The removable heater and control unit make it easy to clean and service. A full complement of alarm provides safety convenience, with both audible and visual indicators: Probe Failure, Power Failure, High Temperature.
Fine quality sieves of 20 mm (8″) diameter made from brass with rolled top periphery. All sieves with fine mesh are made from stainless steel and the coarse ones are punched from sheet. The sieves are stackable.
An advanced model that combines aesthetics with performance, suitable for Hospital, Research and Industrial Laboratories. It has a digital display of speed and time. The motor is fitted on resilient rubber mounts for vibration free performance. Available in 7 configurations.
|01||4 x 15ml.||3500 rpm|
|02||6 x 15ml.||3500 rpm|
|03||8 x 15ml.||3500 rpm|
|04||12 x 15ml.||3500 rpm|
|05||16 x 15ml.||3500 rpm|
|06||4 x 50ml.||3500 rpm|
|07||6 x 50ml.||3500 rpm
This angle head model is designed for use with micro tubes small capacity tubes. It houses a stepless speed regulator, digital speed indicator, 1 99 minutes digital timer with by pass and ONOFF switch.
A low priced electric centrifuge operated on 220~240V, 50Hz A.C. supply with angled heads and a built-in 5 speed regulator available in 3 configurations. The motor is fitted on resilient rubber mounts for vibration free performance.
|01||4 x 15 ml||3500rpm|
|02||6 x 15 ml||3500rpm|
|03||8 x 15 ml||3500rpm|
A rugged double wall construction with glass wool insulation fitted with a constant level device. Holes of the top of the bath are fitted with 105mm concentric rings. The bath temperature is controlled by a thermomstat switch on the front panel for temperatures ranging from above room temperatures to 85ºC. Operates on 220~240V, 50Hz single phase A.C. mains.
|Code||Size||Internal Chamber Size||Wattage|
|01||6 holes||300 x 250 x 100mm||1.0 kW|
|02||12 holes||400 x 300 x 100mm||2.0 kW
A concavo-convex shaped clear glass with ground edges 2mm thick used normally as receptacle for material under observation or to cover beakers when boiling solutions. The meniscus shape prevents the glass from sliding off the beaker land also returns the condensate.
Made from fine cork to hold round bottomed flasks and provide insulation to the laboratory bench. The inner edges are tapered for a better hold.
|Code||Size||OD x ID x Height|
|01||Small||75 x 30 x 30 mm|
|02||Medium||140 x 90 x 30 mm|
|03||Large||210 x 145 x 30 mm
An economical substitute for the wire racks made from a special blend of polypropylene that makes it sink in a water bath and maintain their stability even in churning water. These can easily be dismantled for cleaning and autoclaving. The base is in the form of a grid with square openings with fold up sides and end bars that lock into the rack tops.
This non-corrosive, moulded Retort Stand. The Polypropylene rod measuring 12.5 x 750mm (Diameter x Length) is reinforced with metal and can be screwed into the base. The base is made heavy to provide good stability.