Other Products / Services #5887680

• Optics through designed lens offering narrow to medium beam distribution.
• Well designed housing including the extruded Aluminium heat sink.
• Separate replaceable electronic driver.
• Wide operating voltage range from 100V 285V.
• Idealy suited for retail lighting with surface & recess applications.

• Available in Range : 6W, 10W & 20W
• LED Lumen efficacy is > 120 Lm / W
• Upto 30% energy saving, compare to T5 FTL
• Available in 2700K, 4000K & 6500K
• Decorative end Caps.
• Aluminum Housing

• Elegantly designed housing for ensuring optimum light output with longer life
• Idealy suited for ceiling areas with fall ceiling applications.
• Inbuilt led drivers with operating range of 100285V
• On board Short circuit and surge protection for enhanced reliability and longer service life of driver
• High quality Diffuser for LED linear lamp ensures soft and glare free lighting

• Available in Range : 6W, 12W & 18W
• High Quality Poly carbonate housing
• Short Circuit and open Circuit protection on driver
• ODiffuse Light with Acrylic PC

• Available in 70W, 150W, 250W & 400W
• Single piece die cast Al. LM-6.
• Heat resistance toughened glass
• Confirm IP-66.
• Applications: Airport, Approach Roads, A1, A2 Classifications Roads etc.

• Vo Grade engineering Plastic
• Tested upto 2 lakh operations

• Available in 70W, 150W, 250W & 400W MH/SV lamp.
• Pressure dia cast Al LM-6.
• Tempered protective toughened glass.
• Confirm IP-65.
• Application : Construction site, Industrial Area & Parks etc.

• Highly efficient heat sink designed to ensure prolong the life span of the LED.
• The reflector is made from high purity imported aluminium
• Efficiently designed constant current driver with wide ranging input voltage 100V to 285V
• Significantly lower running cost as compared to conventional fixtures.

• ROHS Compliance
• Captive Screws
• Dual Protection for sparkshield
• High Grade Flame Retardant Engineering plastic
• Silver Nickel contacts for trouble free operations

• Hardened Phosphorus bronze contacts
• High Grade Flame Retardant Engineering Plastic
• Spring Loaded Protective safety shutter

• No Radio Frequency interference
• High Grade Flame Retardant Engineering Plastic
• Good Ventilation for proper heat dissipation
• Easy to remove and install
• No humming noise

• Contact Material Phosphorus Bronze
• Gold Plated
• User Friendly Shutters
• Easy to remove and install

• Universal sockets
• Length of cable 1.6-1.8 Mtr
• Surge protection in built
• Overload protection in built with resetting switch
• Metal Oxide Varistor (MOV) used as safeguard against surge & spikes
• Material in use - FR ABS plastic
• Connector swivels 360⁰

• Equipped with universal socket & 2 pin sockets
• Rated current - 6A
• Rated Voltage - 240V AC, 2.4KW
• PVC insulated wire 4 mts. in length
• Engineering plastic material for high impact & chemical resistance
• Material-FR ploycarbonate

• Plug in type/battery operated wireless bell with volume adjustment.
• 32-48 polyphonic sounds to choose
• Transmitter with IP 44 protection
• Volume setting in the receiver
• Operating range up to 80-260 mtr. in open area
• Auto learning code
• Available in different colours in specific models
• Rated voltage 110V-220V AC (Plug in type)
• Volume 50-80dB

• Rated current-2A
• Rated voltage-250V AC
• Ducts provided on outer surface for heat dissipation
• SS spring provided for better flexibility & easy locking for bulb & CFL
• Highly conductive brass terminals
• Material-FR polycarbonate UV stabilized

• Equipped with universal socket & 2 pin sockets
• Universal multi socket suitable for different types of plugs used around the world
• Rated current-10A
• Rated Voltage 240V AC
• Nickel plated brass contacts for better conductivity
• Available in 4 different transparent colours- Purple, Blue, Green, Orange
• Material-FR polycarbonate UV stabilized

• Rated current-6A/16A
• Rated Voltage 240V AC
• 100% shock proof
• Highly conductive nickel plated contacts
• Material-FR polycarbonate UV stabilized

• Rated current 6A
• Rated voltage 110V-240V AC
• Material- engineering plastic for high impact and chemical resistant
• Compatible to countries like Australia, China, USA, Europe & UK etc.
• Equipped with universal & USB sockets

• Range : 0.5 to 400 Sq. mm in Sigle #Core & Multicore
• Available in FR / FRLS / HR / ZHFR insulation Conforms to IS : 694
• Multi strand 100% Pure annealed Electrolytic copper conductor
• High insulation Resistance
• Double insulation with ultra thin layer

• Range : RG-59, RG-6, RG-11
• Solid / Stranded bare annealed electrolytic grade copper
• PE foam and solid
• Copper ABC / CCS, ATC / AL. Wire braiding / aluminum foiling / taping
• Specially formulated PVC
• RG and UR series BS : 2316 / MIL-C-17

• Range : 1.0 to 50.0 Sq. mm three core flat cable.
• Stranded bare annealed electrolytic grade copper conductor
• Specially formulated PVC compound (Type A & ST-1)
• Round submersible cable can be specially asked for
• Conforms to IS:694

• Range : 0.40 / 0.45 / 0.50 /0.60 mm dia conductors available up to 50 pairs.
• Bare / tinned annealed copper Conductor
• PVC / PE Insulated
• Individual / Overall Shielded with aluminium tape
• (Polyster backed)/ Melinex Tape
• TEC Specification G/WIR 06/02

• Range : 1.5 & 2.5 Sq. mm upto 24 Core, 1100 Volt Grade confirming to IS: 1554-1/1988 & IS 7098-1/1988.
• Solid/ Stranded 100% pure annealed Electrolytic copper conductor.
• Insulation PVC/XLPE/HR
• Armourd/ Unarmourd- GI Round wire/Flat Strip.
• Outer Sheath PVC (ST-1 & 2) /FRLS/HR/ ZHFR.
• Heavy Duty Performance.
• Best combination safety.
• Efficiency & economy.
• Use in Process Control, Communication and Panel control.

• Range : 0.5 Sq. mm to 2.5 Sq. mm Conforming BS 5308-I & II
• Shielding: Core/Pair/Triad/Quads.
• Armourd / Unarmourd.
• ABC/ATC, Solid/Standard 100% pure annealed Electrolytic copper conductor.
• Low attenuation and cross talk.
• High speed performance.
• For Analog & Digital Signals.
• Use in Digital Control, measuring & Communication systems.

• Range : 0.5 Sq. mm to 2.5 Sq. mm Conforming BS: 7846 600/1000 Volts
• Shielding: Core/Pair/Triad/Quads with Mica/glass fire barrier tape.
• Armourd / Unarmourd.
• ABC/ATC, Solid/Standard 100% pure annealed Electrolytic copper conductor.
• For Analog & Digital Signals.
• Operating Temperature -10C +900⁰C
• Fire Tests BS 6387 CWZ BS 8491.

• Range : Single core 2.5, 4, 6, 10, 16 & 25 Sq. mm.
• Flexible tinned annealed electrolytic grade copper conductor.
• Specially formulated cross linked halogen free elastomer insulated and low smoke zero halogen
• sheathed with UV and Ozone resistant.
• Latest requirement for PV system as per TUV spec number to 2 pfg-1169/08.2007.

• Range : 3+1 CCTV and 4+1 CCTV Cable.
• Coaxial Cable consists of solid annealed bare copper conductor.
• PE insulated with Nylon foamed dielectric aluminum foil taped, Gelly flooded, braided with aluminum
• alloy / copper and FR PVC sheathed cable.
• Low loss characteristics reduced attenuation of the video signal.

MH lamps are available in Double Ended & Single Ended versions. Double ended lamps are available in 70w & 150w.Single Ended lamps are available in Elliptical (ranging from 70w to 400w) & Tubular version (ranging from 35w to 400w). These lamps offers efficacy upto 80-85 lumens/watt.

• UV Shield
• Better Colour Rendering
• Longer Life
• Highly Efficient
• Precise optical control

• Range : 0.5 to 1.5 Sq. mm. for upto 12 core.
• Flexible bare annealed electrolytic grade copper.
• PVC insulated & PVC sheathed.
• Specially formulated PVC.

• Instantaneous Start.
• Low Power Consumptions less than 1 wt. saving of more than 30% over conventional meters
• Meter records correct energy with same accuracy under reverse current connection.
• LCD/LEDs indication for current reversal tampering and phase availability.
• Optional : Optical port/RS 232 communication for LCD Meter.
• An ISO-9001 : 2008 Company
• Meter with optical port are suitable for AMR application.