Electronic Structural Moisture Indicator using a Patented technique based on the dielectric constant / high frequency measuring principle. The indicator is equipped with a digital LCD readout and a universally applicable ball sensor for non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, floors and ceilings. Handy rapid-action moisture indicator in pocket size for fast single and series. Ideal pre-tester for use with all moisture analyzers using the carbide method.

Features :

No Separate Measuring Electrodes or Cables required.
Ideal pre-tester for use with all moisture analyzers using the carbide method.
Fully Automatic Adjustment of the Indicator.
Rechargeable Battery.
Handy rapid-action moisture indicator in pocket size for fast single and series measurements.

This Window Tint Meter is a hand held device that measure the amount of light that passes through a window. It measures the
total amount of Visual Light Transmission ( henceforth referred to as VLT) through a window & any coatings (tint film) on that
window. The device was designed to measure the total VLT of a window after it has been treated with aftermarket window film.
The device slides over a partially rolled down window, does its calculations, and in seconds displays the readings on a LCD. Because it has its own internal light source, the meter will work day or.

Elite 440/ 443 is a Multi-Line Three-Phase Digital Panel Meter for

Accurate and reliable Measurement of Electrical Quantities
(Voltage, current, Power, Frequency, etc., ) in industrial and
commercial applications. It has a large multi-line backlit LCD
display which enables four parameters to be displayed at the
same time. Modbus Communications capability allows easy
integration with energy monitoring systems. An expansion
module can be fitted for enhanced functionality (pulse
input / output)

Features :

Display. 242 LCD
User friendly programmable with 4 keys.
IN & OUT Flow NPN Type inputs.
4-20mA Re-Transmission output.
Two Alarm relay output.
RS485 Modbus-RTU Output.
Panel mounting 96x48mm Enclosure.
Elegant appearance and compact in size.
Accurate and sturdy in operation.
Accuracy better than 0.5 % of the full scale.
Very easy to operate.

The EQ-107 is high performance Class 2 Integrating Sound Level Meter.
It measures Lxyi, Lxyp, Lxeq, Lxmax, Lxmin, LAE, SPL, Sel, Lcpeak, function.

Features :

• Comply with IEC-61672-2002 Class 2


• Easy To Use


• Fast, Slow, Impulse Response Time.


• Wide Frequency Range: 31.5Hz 8KHz


• Wide Measurement Range: 30dB 130dB.


• Wide Dynamic Range : 100dB.


• A / C / Z Frequency Weighting.


• Data Stored up to 32.000 Records and


• Automatic Data transfer to micro SD card.


• USB Interface.


• AC and DC output.


• Bargraph Display

Low price, Short case, Light-weight

Features :
6-channel dotting
Short depth in 150mm
Dust-proot. IP-65 Water-resistance
Standard RS-232 Communication interface
Universal input and Range

Features :
1 pulse counting input
2 outputs
RS-485 / Modbus RTU Communication
Option : Retransmision output

Advanced Sound Level Meter C 390 fully complies with IEC61672-1. This meter has only one Measuring Range and it isextending from 30dB to 130dB that is full 100db. The operator will not have to worry about which range to use like in the 3 or 4Range Models and neither about Signal Latency in Auto Range Models. This unit is also a data logger and it is equipped withManual Storing Capability which cap store 99 sets of data and can be readout from unit or through PC.

FEATURES :

• Complies with IEC 61672-1 Class 2 Standard


• 31, 000 Records Datalogger


• LCD Recording Readout (99 memory recording)


• Windows Based Software


• With Back Light LCD

Features :
Extremely Cost Effective
Max Hold and Data Hold Function
High Performance
Compact & New Design

Features :
High quality Accelerometer for accurate and repeatable measurements
Bearing condition monitoring function
LCD digital display
Lightweight and easy to use
Wide frequency range (10Hz to 10kHz) in Acceleration mode

Specification:

Measurement Modes :

Hand-transmitted Vibrations

Whole-body Vibrations

Building Vibrations

Measurement Parameters:RMS, VDV, MTVV, Peak, Max, Min

Frequency Weightings:Fz, Fc, Wh for Hand-transmitted Vibrations

Fz, Fa, Wb, Wc, Wd, We, Wj, Wk for whole body vibrations

Fz, Fm, Wm for building vibrations

Professional Vibration meter supply with vibration sensor full set
Velocity range : 200 mm/S
Acceleration range : 200 m/S
RMS & Peak measurement, peak function to hold the peak value.
Wide frequency range.
Memory function to record maximum and minimum readings
with recall.
Separate Vibration probe, easy operation.
Auto shut off saves battery life
Built-in low battery indicator
Heavy duty & compact housing case.
Complete set with the hard carrying case.

Application :
Wood Boards, Timber
Card Boards, Papers
Corrugated Box
Dry Fruits

Electronic high-speed moisture meter for Coffer Beans, Grain, oil seeds and many other granular crops.

The outstanding features of this completely new and worldwide unique top meter among grain moisture testers are.
Direct reading of the moisture content for all kinds of grain, without table conversions or corrections, by precise adjustment of calibration for each kind of grain by setting an individual code number.

Automatic compensation of the grain temp. over a range offrom 10 to 50 C
No weighing or grinding of the test sample required
Measuring range between 4 & 32% moisture (depending on kind of grain)

Automatically Temperature Corrected (ATC) Reading when usedwith Temperature Probe
Reading with Moisture Probe
Readings with Integral Clectrod Pins

Features :
Analog bargraph / segments
Peak Hold
Relative Mode
Max and Data Hold

Features :
High Accuracy and rapid response
Data-Hold function
Unit and sign display for easy reading
Automatic zeroing

Features :
Automatic Zero when power on
Auto Power off
Fc / Lux Function Selectable

Applications :

Industrial

Monitoring blue light radiationhazards in welding

UV sterilization

Graphic Arts

Photochemical Matching

Curinf of Inks, adhesives & Coatings

Laboratory

Weathering Degradation studies

UV sterilization

Virology

Microbial genetics

DNA research

Features :
Analog Signal Output Function
1mA Resolution
Touch Zero Function
4 digits Display

Features :
Auto Power Off
High Speed Bargraph
DATA HOLD Function
PEAK HOLD Function

Features :
AC/DC Current Measurement
High Speed Barograph
Resolution of 0.01A, 0.1V
Measuring Frequency From Current Clamp & Test Terminal

Features :
Air speed and Flow rate inside pipeline with hot-wire probes, vane probes or Pitot tube probes.
Relative Humidity & Temperature with combined probes
Differential Pressure up to 2000 mbar
Barometric Pressure
Temperature with immersion, pointed or contact probes.

HD48. Series of Transmitters Measure Temperature, Relative Humidity and Dew Point and provide depending on the version a Current (420mA) or a Voltage (010V) linear analog outputs signal for transmission to a remote display, recorder, controller or data processing unit.
The HD48series of transmitters are designed for conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, crowded places, canteens, auditoria, gyms or high-density farms, as well as industrial and civil sectors.
The HD48 transmitters measure relative humidity with a well proven capacitive sensor and temperature with a precision NTC sensor; the sensors in combination with an accurate electronics guarantee precise and reliable measurements in the course of time. A stainless steel 20m filter protect the sensors against dust particles and high air velocity (other filters are available for different applications).
The transmitters are factory calibrated and no further adjustments are required. All series are available in three different versions: with orizontal probe (HD48TO) for duct mounting, with vertical probe (HD48TV) for wall mounting and with remote probe (HD48TC) having the probe connected to the electronics by means of a cable (2, 5, or 10 meters long). The probes can be supplied in two lengths (135mm or 335mm). Optionally, 4-digit LCD display is available. It allows to visualize a selected quantity among those detected by the instrument (C, F, %RH or DP).
Many different accessories are available for the installation: for example to fix the probe to the duct, you can use, the HD9008.31 flange, a 3/8 universal biconical connection or a PG16 metal cable gland (1014mm).

Features :

.3 Touch Screen

Plus Versions Math, External Channels, Batch, Counter, Totalizer,

Custom Display, FDA 21 CFR Part 11

Screen Saver, Email Option

Standard PC Software Historical Viewer & Configuration

Safety Standards CE, R0HS, cULus

Digital intelligent paper moisture meter. Can work on 3 types of paper (carton, copperplate paper, writing paper) through the spring contact Precise measuring method.

Features :

Microprocessor Based.
Digital Large LCD display.
Low Power Consumption.
Fast Response, Easy to Operate.

Digital intelligent paper moisture meter. Can work on 3 types of paper (carton, copperplate paper, writing paper) through the spring contact Precise measuring method.

Features :

Microprocessor Based.
Digital Large LCD display.
Low Power Consumption.
Fast Response, Easy to Operate.

Application :

This Meter is Applied to Measuring electromagnetic
fields of extremely low frequency (ELF)of 30 to 300Hz

It is capable of Measuring the electromagnetic filed
radiation intensity that is produced from electric transmission
equipment, power line, microwave oven, air conditioner,
refrigerator, Computer monitor video / audio device & so forth

The Magnetic field unit is Tesia (T), Gauss (G), mini gauss(mG)
or micro-Tesia (T)

1T = 10, 000G
1G = 1, 000mG
1T = 10mG

Model : TM 191

Application :

Moisture used for fast and accurate measurement of moisture and temperature in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder.

Designed for fast measurement of timber (up to 180 mm thick), particleboard and veneer. Ideal both for single and series measurements before, during and after processing wood. Measuring Range : 4 to 60 % m.c., with correction facility for your groups of wood and automatic temperature compensation, display by digital LCD readout

Principal Features and Technical Data :
Handy quick moisture meter for fast single and series measurements.
Size : L 140 mm W 90 mm H 42/50 mm. Weight : 220 g without accessory.
Direct reading by digital LCD, Resolution : 0.1 % m.c.
Wood species selector for automatic correction of readings, for over 300 species of wood.
Automatic compensation of influence of wood temperature between 10 and +40C.
Fully automatic instrument setting no manual adjustment necessary.
Power Supply by 9V dry cell or, optionally, Ni-Cd accumulator.