Products / Services #1599837

• Temperature : 0 - 150C
• Line Pressure allowed upto 480 Bar
• Outputs 4 - 20mA, 0-5V
• Thread: 1/4" BSP, 1/4" NPTF, 7/16" UNF
• Port Connection : BSPP

• Economical solution, accuracy 4% FS
• From 0.5 up to 550 lpm at 240 Bar
• Switches and analogue output available
• Suitable for oil, water - Glycol & phosphate ester

• Unidirectional, up to 400 lpm and 350 Bar
• Optional relay switch
• Optional thermometer
• Available in Aluminium for Oil, or Brass for water

• 3 Models cover range 10 - 750 lpm
• Pressure: 480 Bar
• Temperature:120C
• Turbine Flow Meter with Loading Valve
• Bi-directional
• For use with oils, fuels, phosphate-esters
• Outputs available: SR and CAN, compatible with Data Loggers

• Easily adjustable, dry contact alarm settings
• Available for Fluids or Air
• Body material: Aluminium / Brass or Stainless Steel
• Port sizes : 3/8" to 2"
• Accurate within 2.5% over mid-scale, 4% FSD
• Double break switches available on request

• Flow rate up to 800 lpm
• Pressures up to 420 Bar
• Temperature up to 120C
• Digital display for Flow andTemperature & Analogue Pressure
• Flow accuracy 1% of full Scale
• Easy to useTwo models available:
  1. 10 to 400 lpm
  2. 20 to 800 lpm

• All digital display
• Measure Flow (1% IR], Pressure & Temperature
• Calculate Power and Volumetric Efficiency
• Two flow ranges: upto 400 lpm and 800 lpm
• Measure hydraulic pump efficiency with P-Q test
• Pressure upto 480 Bar Record data to robust, non volatile memory
• Produce an electronic report for immediate email to customer

• Flow rate up to 200 lpm
• Pressures up to 420 Bar
• Temperature up to 110C
• Analogue display for Flow rate, Pressure and Temperature
• 4-Flow ranges: 30, 60, 120 & 200 lpm
• Built-in Loading Valve
• No batteries required

• Maximun Pressure: upto 700 Bar
• Maximun Flow rate:38 lpm
• Temperature up to 110C
• Porting: BSPP, NPTF, SAE and O ring manifold, CETOP-3 / DIN3 manifold
• Material: External parts in Stainless Steel. Internal components in Steel / also available in Aluminium
• 7 flow patterns, 3 flow ratings
• Spring center or detent action

• Pressures upto 600 Bar
• Peak Pressure -1200 Bar
• Scan rate :10 ms
• Backlit display
• Accuracy +/- 0.5 % FS
• Battery operated
• End connection M16 x 2
• Pressures in Bar / PSI / Mpa

Our impeccable range of quick disconnect couplings are vastly reliable and durable. Our dimensionally accurate range of quick disconnect couplings is the most inexpensive solutions for fluid lines connection and disconnection. Our quality tested and smooth finished range of the quick disconnect couplings is appreciated for its extended service life.

Aimed at mobile and industrial applications the VFD190 can be used for controlling hydraulic motor and cylinder speeds by manually adjusting the flow rate.

• Working Pressure (Max): Up to 420 bar (6000 psi)
• Total flow capacity: 50 USgpm (190 lpm)
• Material: Steel components in cast SG iron body painted black; aluminium knob
• Weight: 7.7 to 8.8lbs (3.5 to 4.0Kg)
• Mounting: Two bolt - M8 or 5/16
• Clearly marked single-turn hand dial permits fast visual adjustments to pre-determined Priority

Pressure compensated permitting both Priority and By-Pass to be used simultaneously at varying pressures without affecting the Priority flow rate.

The VFD120 design has also been optimised to reduce energy wastage by minimising the pressure losses across the valve, resulting in a significant reduction in running costs

A 3-port pressure compensated flow divider-combiner, ideal for driving two cylinders in close unison regardless of individual loads or flow direction

• Working pressures up to 310 bar (4500 psi)
• Maximum flow 70 lpm (18.5 US gpm)
• BSP, NPT, Metric and SAE ports available
• Steel components in cast iron body
• Proportional splits from 50/50 to 10/90
• Mounting: 3 bolt

Suitable for mining applications

We are a technically sophisticated manufacturer and supplier of mobile control valves based in India. From the day of our inception we have been mastering in this domain by offering a splendid range of mobile control valves suitable for low and high pressure installations in different industries. These mobile control valves are a perfect combination of sophisticated technology and best graded materials that results in a complete cost efficient range of high performing mobile control valves that find their extensive application in many areas. These mobile control valves are designed to handle excessive pressure and perform extra ordinarily in difficult situations.

• Flow rate : from 0.1 to 150 lpm
• Pressure up to 420 Bar
• Output options: 4 to 20 mA and Frequency
• Bi-directional operation
• Seals: NBR(Nitrile]/others available
• Internal parts: Gears: DIN 1.4122 SS
• Accuracy +/-1% of Indicative Reading
• This gear type flow meter has a built-in micro-controller that linearises and conditions the signal from the Flow meter. This enables due to connect directly into your Digital Display / PLC

• Flow and Temperature monitoring - Measure, Display, Analog Output / Switch / Transmit
• Pressure: 210/420 Bar
• Accuracy 3% of full scale
• 5 flow sizes : 1-360 lpm
• Repeatability better than 1%
• Temperature measurement built-in
• Optional: Switches and Analog output (mA, V]

• Accurate ( 0.25% Full Scale]
• Economically priced
• Rugged design
• Outputs : 4 - 20mA, 0-5V
• Stainless Steel wetted parts
• Both Bar and PSI ranges available
• Port Connection : BSPP

We are the popular name as the suppliers of hydraulic test equipments in India. Our range of hydraulic test equipments is known for its high performance, superior quality and it requires very minimal maintenance effort. These hydraulic test equipments are easy to operate and durable thus ensuring our customers effective service with least effort. Since our inception our main focus has been to manufacture highest quality hydraulic test equipments and to serve our clients with the unsurpassed range of hydraulic test equipments. Our entire strength lies in our proficient team and well invested infrastructure with in-house factory for an efficient production of hydraulic test equipments. Being a client centric organization, we always believe in offering the superior quality hydraulic test equipments to our clients. We are supported by a team of experienced workforce, who has been entitled with the responsibility of manufacturing the hydraulic test equipments of superior quality. Our team of experts has vast experience and knowledge in the domain of designing and developing hydraulic test equipments. The team works in close proximity with the different parameters given by the clients for developing the hydraulic test equipments that are as per their application requirements and which also assure smooth working. Clients can avail these hydraulic test equipments from us at industry leading prices.

These mobile control valves are available with us in spring centered and detented models. The mobile control valves consists of a sturdy structural construction and it has its main members being built of heavy duty structural steel material reinforced with suitable cross members, so that it is strong enough to withstand the high loads. The mobile control valves are widely acknowledged for their being ideal with checknut and elongated gland. Our compact sized and easily installable mobile control valves can be availed by our clients at the most competitive prices in the industry.