Hydro Power-Tech Engineering

Ravki, Rajkot, Gujarat

Salient Features

• “Programmable logic controls” (PLC) is provided in our Machine of international standard make Delta, offering maximum production flexibility and full compatibility with international standards.
• Both cylinder are work independent (two worker can work as same time) 
• Stroke adjust with the help of proximity sensor and light indication glass for easy stroke adjustment, MONOBLOCK Structure and Precise machining of the structural membrane is done to get the required accuracies like parallelism between platen and bed and right angularity. Between bed and the moving platen. 
• ‘Auto Lubrication System: All moving parts are lubricated from a centralized lubrication arrangement with auto timer, once you fill lubricant no worry for 2-3 months about lubrication. 
• Auto hold down mechanism which will give fast production rate and it hold material with heavy force and cut material so increase Die life with better cutting quality,  
• Quick Die – Punch Mechanism:- you can change punch fast and easy,  
• All die are inter-changeable so one die can use 2 to 4 times, also material and process of die so that it will give longer life without blending edge,  
• Universal angle cutting mechanism will give possibility to cut wide range of angle size in one die, no die change required for bigger or smaller size of angle. 
• The low noise hydraulic power pack unit is designed as per international practices and assembled with internationally reputed make components. The presses are designed as per ISI guidelines, hence standard seals, bushes are used. 
• Machine have Guard at all station, electric switch and rubber pad which provide safety for operator and protect machine again dust and free-falling metal while cutting,  
• All station of Shearing have common Stroke Counter, it will Count Number of Cut. 
• Table Design with ‘T’ Slot, Regular die of Power Press can be Use on Ironworker Machine.
• Machine comes with all Standard accessories spanner set, warranty Card, instructional and maintenance manual.

Machine Comes with Standard Functional Accessories:

Die Set (total 14 Nos.):

• A 10 Pair of Punch and Die (select Any 10 Round Punch + Die Set from Dia. 8 Mm to 20mm)
• A Set of Angle Steel Cutting Blade.
• A Set of Square and Round Bar (or I Section or C Section) Cutting Blade (any One of Three)
• A Set of Flat-bar Shearing Blade.
• A Set of Notching Blade (v- Notch or Square Notch Any One)

Die Set is Customizable as per Your Requirement, Please Freely Discuss with Our Company.

Standard Functional Accessories:

• Automatic Multi Point 24v Dc Motor Operated Lubracting System
• 3 in 1 Die Holder (50, 73 Die Holder & Angle Punching)
• Hydraulic Hold-down Mechanism (auto Hold Angle & Flat)
• Back Gauge
• Mode (inching, Auto)
• Both Side E/stop
• Two Saparat Foot Switch

Salient Features

• “Programmable logic controls” (PLC) is provided in our Machine of international standard make Delta, offering maximum production flexibility and full compatibility with international standards.
• Both cylinder are work independent (two worker can work as same time) 
• Stroke adjust with the help of proximity sensor and light indication glass for easy stroke adjustment, MONOBLOCK Structure and Precise machining of the structural membrane is done to get the required accuracies like parallelism between platen and bed and right angularity. Between bed and the moving platen. 
• ‘Auto Lubrication System: All moving parts are lubricated from a centralized lubrication arrangement with auto timer, once you fill lubricant no worry for 2-3 months about lubrication. 
• Auto hold down mechanism which will give fast production rate and it hold material with heavy force and cut material so increase Die life with better cutting quality,  
• Quick Die – Punch Mechanism:- you can change punch fast and easy,  
• All die are inter-changeable so one die can use 2 to 4 times, also material and process of die so that it will give longer life without blending edge,  
• Universal angle cutting mechanism will give possibility to cut wide range of angle size in one die, no die change required for bigger or smaller size of angle. 
• The low noise hydraulic power pack unit is designed as per international practices and assembled with internationally reputed make components. The presses are designed as per ISI guidelines, hence standard seals, bushes are used. 
• Machine have Guard at all station, electric switch and rubber pad which provide safety for operator and protect machine again dust and free-falling metal while cutting,  
• All station of Shearing have common Stroke Counter, it will Count Number of Cut. 
• Table Design with ‘T’ Slot, Regular die of Power Press can be Use on Ironworker Machine.
• Machine comes with all Standard accessories spanner set, warranty Card, instructional and maintenance manual.

Machine Comes with Standard Functional Accessories:

Die Set (total 14 Nos.):

• A 10 Pair of Punch and Die (select Any 10 Round Punch + Die Set from Dia. 8 Mm to 20mm)
• A Set of Angle Steel Cutting Blade.
• A Set of Square and Round Bar (or I Section or C Section) Cutting Blade (any One of Three)
• A Set of Flat-bar Shearing Blade.
• A Set of Notching Blade (v- Notch or Square Notch Any One)

Die Set is Customizable as per Your Requirement, Please Freely Discuss with Our Company.

Standard Functional Accessories:

• Automatic Multi Point 24v Dc Motor Operated Lubracting System
• 3 in 1 Die Holder (50, 73 Die Holder & Angle Punching)
• Hydraulic Hold-down Mechanism (auto Hold Angle & Flat)
• Back Gauge
• Mode (inching, Auto)
• Both Side E/stop
• Two Saparat Foot Switch

Salient Features

• “Programmable logic controls” (PLC) is provided in our Machine of international standard make Delta, offering maximum production flexibility and full compatibility with international standards.
• Both cylinder are work independent (two worker can work as same time) 
• Stroke adjust with the help of proximity sensor and light indication glass for easy stroke adjustment, MONOBLOCK Structure and Precise machining of the structural membrane is done to get the required accuracies like parallelism between platen and bed and right angularity. Between bed and the moving platen. 
• ‘Auto Lubrication System: All moving parts are lubricated from a centralized lubrication arrangement with auto timer, once you fill lubricant no worry for 2-3 months about lubrication. 
• Auto hold down mechanism which will give fast production rate and it hold material with heavy force and cut material so increase Die life with better cutting quality,  
• Quick Die – Punch Mechanism:- you can change punch fast and easy,  
• All die are inter-changeable so one die can use 2 to 4 times, also material and process of die so that it will give longer life without blending edge,  
• Universal angle cutting mechanism will give possibility to cut wide range of angle size in one die, no die change required for bigger or smaller size of angle. 
• The low noise hydraulic power pack unit is designed as per international practices and assembled with internationally reputed make components. The presses are designed as per ISI guidelines, hence standard seals, bushes are used. 
• Machine have Guard at all station, electric switch and rubber pad which provide safety for operator and protect machine again dust and free-falling metal while cutting,  
• All station of Shearing have common Stroke Counter, it will Count Number of Cut. 
• Table Design with ‘T’ Slot, Regular die of Power Press can be Use on Ironworker Machine.
• Machine comes with all Standard accessories spanner set, warranty Card, instructional and maintenance manual.

Machine Comes with Standard Functional Accessories:

Die Set (total 14 Nos.):

• A 10 Pair of Punch and Die (select Any 10 Round Punch + Die Set from Dia. 8 Mm to 20mm)
• A Set of Angle Steel Cutting Blade.
• A Set of Square and Round Bar (or I Section or C Section) Cutting Blade (any One of Three)
• A Set of Flat-bar Shearing Blade.
• A Set of Notching Blade (v- Notch or Square Notch Any One)

Die Set is Customizable as per Your Requirement, Please Freely Discuss with Our Company.

Standard Functional Accessories:

• Automatic Multi Point 24v Dc Motor Operated Lubracting System
• 3 in 1 Die Holder (50, 73 Die Holder & Angle Punching)
• Hydraulic Hold-down Mechanism (auto Hold Angle & Flat)
• Back Gauge
• Mode (inching, Auto)
• Both Side E/stop
• Two Saparat Foot Switch

Salient Features

• “Programmable logic controls” (PLC) is provided in our Machine of international standard make Delta, offering maximum production flexibility and full compatibility with international standards.
• Both cylinder are work independent (two worker can work as same time) 
• Stroke adjust with the help of proximity sensor and light indication glass for easy stroke adjustment, MONOBLOCK Structure and Precise machining of the structural membrane is done to get the required accuracies like parallelism between platen and bed and right angularity. Between bed and the moving platen. 
• ‘Auto Lubrication System: All moving parts are lubricated from a centralized lubrication arrangement with auto timer, once you fill lubricant no worry for 2-3 months about lubrication. 
• Auto hold down mechanism which will give fast production rate and it hold material with heavy force and cut material so increase Die life with better cutting quality,  
• Quick Die – Punch Mechanism:- you can change punch fast and easy,  
• All die are inter-changeable so one die can use 2 to 4 times, also material and process of die so that it will give longer life without blending edge,  
• Universal angle cutting mechanism will give possibility to cut wide range of angle size in one die, no die change required for bigger or smaller size of angle. 
• The low noise hydraulic power pack unit is designed as per international practices and assembled with internationally reputed make components. The presses are designed as per ISI guidelines, hence standard seals, bushes are used. 
• Machine have Guard at all station, electric switch and rubber pad which provide safety for operator and protect machine again dust and free-falling metal while cutting,  
• All station of Shearing have common Stroke Counter, it will Count Number of Cut. 
• Table Design with ‘T’ Slot, Regular die of Power Press can be Use on Ironworker Machine.
• Machine comes with all Standard accessories spanner set, warranty Card, instructional and maintenance manual.

Machine Comes with Standard Functional Accessories:

Die Set (total 14 Nos.):

• A 10 Pair of Punch and Die (select Any 10 Round Punch + Die Set from Dia. 8 Mm to 20mm)
• A Set of Angle Steel Cutting Blade.
• A Set of Square and Round Bar (or I Section or C Section) Cutting Blade (any One of Three)
• A Set of Flat-bar Shearing Blade.
• A Set of Notching Blade (v- Notch or Square Notch Any One)

Die Set is Customizable as per Your Requirement, Please Freely Discuss with Our Company.

Standard Functional Accessories:

• Automatic Multi Point 24v Dc Motor Operated Lubracting System
• 3 in 1 Die Holder (50, 73 Die Holder & Angle Punching)
• Hydraulic Hold-down Mechanism (auto Hold Angle & Flat)
• Back Gauge
• Mode (inching, Auto)
• Both Side E/stop
• Two Saparat Foot Switch

Salient Features

• “Programmable logic controls” (PLC) is provided in our Machine of international standard make Delta, offering maximum production flexibility and full compatibility with international standards.
• Both cylinder are work independent (two worker can work as same time) 
• Stroke adjust with the help of proximity sensor and light indication glass for easy stroke adjustment, MONOBLOCK Structure and Precise machining of the structural membrane is done to get the required accuracies like parallelism between platen and bed and right angularity. Between bed and the moving platen. 
• ‘Auto Lubrication System: All moving parts are lubricated from a centralized lubrication arrangement with auto timer, once you fill lubricant no worry for 2-3 months about lubrication. 
• Auto hold down mechanism which will give fast production rate and it hold material with heavy force and cut material so increase Die life with better cutting quality,  
• Quick Die – Punch Mechanism:- you can change punch fast and easy,  
• All die are inter-changeable so one die can use 2 to 4 times, also material and process of die so that it will give longer life without blending edge,  
• Universal angle cutting mechanism will give possibility to cut wide range of angle size in one die, no die change required for bigger or smaller size of angle. 
• The low noise hydraulic power pack unit is designed as per international practices and assembled with internationally reputed make components. The presses are designed as per ISI guidelines, hence standard seals, bushes are used. 
• Machine have Guard at all station, electric switch and rubber pad which provide safety for operator and protect machine again dust and free-falling metal while cutting,  
• All station of Shearing have common Stroke Counter, it will Count Number of Cut. 
• Table Design with ‘T’ Slot, Regular die of Power Press can be Use on Ironworker Machine.
• Machine comes with all Standard accessories spanner set, warranty Card, instructional and maintenance manual.

Machine Comes with Standard Functional Accessories:

Die Set (total 14 Nos.):

• A 10 Pair of Punch and Die (select Any 10 Round Punch + Die Set from Dia. 8 Mm to 20mm)
• A Set of Angle Steel Cutting Blade.
• A Set of Square and Round Bar (or I Section or C Section) Cutting Blade (any One of Three)
• A Set of Flat-bar Shearing Blade.
• A Set of Notching Blade (v- Notch or Square Notch Any One)

Die Set is Customizable as per Your Requirement, Please Freely Discuss with Our Company.

Standard Functional Accessories:

• Automatic Multi Point 24v Dc Motor Operated Lubracting System
• 3 in 1 Die Holder (50, 73 Die Holder & Angle Punching)
• Hydraulic Hold-down Mechanism (auto Hold Angle & Flat)
• Back Gauge
• Mode (inching, Auto)
• Both Side E/stop
• Two Saparat Foot Switch