Pumps, Pumping Machines & Parts #116491

The KDA Series Progressive Cavity Pump is made out of Cast Iron Pump housing and Bearing Housing, Rotors of Hard Chrome Plated Alloy steel/Tool steel , SS 304, SS 316 and the rotating part are of Alloy steel or Stainless Steel. The Universal joints are specially designed Single or Double Knuckle joints. The Rubber stator is made out of natural or synthetic rubbers like Nitrile, EPDM, Hyplon, Silicon, Neoprene, Viton, Butyle or Hi Nitrile, based on application.

Wettable parts of KHA Series Progressive Cavity Pump is made out of SS 304, SS 316 or special Alloys like Alloy 20, Hastalloy. The Rubber stators are of Natural or Synthetic rubbers like Nitrile, EPDM, Hyplon, Silicon, Neoprene, Viton, Butyle and Hi Nitrile, based on end application.

KX Series Progressive Cavity Pump is of cast iron construction with various metallurgy of rotating parts like Alloy Steel, Tool Steel, SS 304 and SS 316 while KX CF pumps are of complete SS 304 and SS 316 material of construction. Other various options of FRP / Ebonite lined housing with rotating parts in Super Alloys like Alloy 20, Hastelloy C, Hastelloy B and Titanium are available for highly corrosive applications. Shaft sealing is ensured by soft gland packing / mechanical seal. Torsion free metal bonded stator and double sealed universal joints as Pin & Bush Joints or Special designs like Gear joints or Cardon Joints as per customer requirements for longer service life and improved efficiency results in trouble free performance of the pumps. Salient Features :

• Non-clogging : handles solids in suspension or mixture containing high percentage of solids
• Can work on Snore : inherently self-priming
• High Suction Lift : low NPSH(R), effective in high vacuum conditions
• Minimal Internal Wear : Gentle handling of shear sensitive and abrasive products because of low internal velocity
• Reversible : suction and delivery ends can be interchanged by merely changing direction of rotation of the prime mover
• Versatility : handles abrasive, shear sensitive and viscous materials, solids in suspension and air-solid-liquid mixture

KX-PX Series Progressive Cavity Pump is designed with special geometries in 1/2 as well as 2/3 profiles. While cast iron and SS 316 material of construction are offered, special materials of construction are also available for highly corrosive fluids. Shaft sealing is ensured by soft Packed Gland/ Mechanical seal. Torsion free metal bonded stator and double sealed universal joints are provided for longer service life and high efficiency.

HYDRO PROKAV KM 2000 SERIES PUMPS

Hydro Prokav KM 2000 Series pumps are built with rugged gear-type universal joint which is the effective solution to handle heavy radical thrust loads. This design ensures best performance with very minimal maintenance, low wear & Tear rotating parts and longer life of pump.

Special Option to suit every application- Flush gland

• Allows Gland Pocking leakage to be flushed away from the pump preventing severe damage to seals and packing.
• Permits controlled leakage of process or flush fluid to reduce friction and dissipate heat.
• Inlet and outlet connections for flushing leakage away to drain
• Ideal for waste water treatment.sugar, petrochemical and paper industry applications.
• Available with flanged and wide throat version with or without shaft sleeves.

Sailent features of Hydro Prokav KM 2000 progressive cavity pumps

• low total cost of ownership
• Positive displacement
• non-pulsating flow
• Accurate, repeatable flow
• Head independent of pump speed
• Low NPSH Requirement
• Self-priming
• High suction lift upto 28 feet
• low shear
• particles upto 2.8 in diameter
• Reversible
• Viscosities up to 1, 000, 000 cps
• No valves to clag, Stick or Vapor lock
• No timing gear adjustments.
• High Valumetrics and mechnical efficiency
• Smooth fluid discharge
• no vibration
• Easy to maintain
• Wide temperature range to 400 Deg F
• Ideal for metering applications
• Easy to regulate
• Superior abrasion resistance

RANGE OF PRODUCTS

• Wabble stator pumps
• L frame pumps
• KM 1000 series pumps
• KM 2000 series pumps
• KX series
• PX series
• Wide throat pumps
• Bridge breaker pumps
• Sanitary design quick clean pumps
• Vertical/ Drum emptying PC pumps

Materials of construction

Pump body :Cast Iron, Cast Steel, CF8, CF8MInternals, Including Rotor :Alloy Steel, Tool Steel, AISI 304, AISI 316, Stators:EPDM (to 260 Deg F)Fluoroelastomer ( to 400 Deg F)Nitrile (to 210 Deg F)Natural Rubber( to 185 Deg F)

The heavy duty transmission train

A. Gear Type universal joints with perfect sealing of rubber sheath prevents contamination of joints and foreign particle entry to joints and foreign particle entry to joints during pumping of fluids.B. The grease lubricated gear joints can very well operate up to 90 Deg C, far higher than other oil lubricanted joints. C. Thrust Plates are clamped by pins ensuring maximum life for gea joints and smooth functioning. D. The lenghty Coupling rod design maintains shaft angularity of less than 1.5 Deg for reduction stress on gear joints and on Bearings.

Low maintainance casing & bearing housing assembly

A. Hydro Prokav KM 2000 series pups are built with grease packed tapered roller bearing for withstanding better load conditions of the rotating parts.B. Sturdy casting improve pump performance by reducing vibration load to the shaft and bearings C. The gear joint on shaft side reduces the radial thrust on drive shaft and bearings and requires minimal pump disassembly.

Drive Shaft assembly

A. Hallow single shaft design reduces run-out for extended packed gland or mechanical seal life.B.Stuffing box assembly can accommodate single/double mechanical seal or different types of packing.

Additional Features

A.Suction chamber allows full 360 Deg rotation for easier piping installation.B. Suction and discharge flanges as per ANSI, BS, ASA, DIN OR JIS for easy installation C. Drain plug provided at the casing ensures the total drain of liquid form casing before inspecton or during maintenance D. All pumps are provided with inspection ports on either side for efficient cleaning. E. Gland area is drilled and tapped for easy disposal of stuffing box leakages.

Unique Fitment of pumping elements

A. Precision machined rotor and elastomer stator design reduces slippage for higher efficiency and improved volumetric effeciency.B. Hard Chrome plated rotors provide high abrasion resistance and longer service life. C. Wide variety of elastomers available for every applications with proven qualities

KC Series Progressive Cavity Pump comes with compact configuration of screw pumps in which the pumping parts are coupled directly to the drive thereby eliminating the bearing housing. The KC Series Progressive Cavity Pump is suitable for restricted spaces of operation or mobile pump sets apart from low maintenance and cost effectiveness ensuring long service life. Various material of construction are offered to suit varied applications in CI, CS, SS304, SS316 etc., while Stators will be of Natural, Nitrile, EPDM, Neoprene, Hypalon, Viton, Silicon, Butyl, Hi-Nitrile, Buna Poly Butadiene etc.,

K-KX-KY (F) Series Progressive Cavity Pump is a hygienic design pump with all metal parts in contact with liquid in smooth SS and stator of non-contamination rubber and seamless body eliminating product-retaining pockets. Shaft sealing is provided by food grade, gland packing / mechanical seal. In addition, the K-KX-KY (F) Series Progressive Cavity Pump is equipped with IDF / SMS /TRICLOVER / equivalent end connections. Salient Features :

• All metallic parts in contact with the fluid are in smooth finish stainless steel
• Stator is of non-contaminating polymer, which is resistant to oils and fat
• All internal contours are designed to be swept by the product flow or by a detergent when in-line cleaning
• Elimination of product retaining pockets avoids chemical or bacteriological contamination
• Simple construction allows quick dismantling
• Can work against high vacuum. Ideal for lifting viscous fluids from the vacuum pan
• Low fluid velocities ensures gentle handling of shear sensitive fluids without damage
• Pulsation, turbulence or aeration-free metered flow proportional to speed
• Capacity varied simple variation of pump speed to match system parameters

K-KX-KY (W) Series Progressive Cavity Pump is provided with hopper type suction inlet allowing gravity flow of Plastic Viscous media on Augur cum Coupling Rod pushing viscous substances into pumping cavity. Standard pumps employ Mild Steel Hopper Pump Casing with alloy steel rotating parts. For corrosive or hygienic duty, all contact parts are in SS material. Shaft sealing is provided by soft gland packing / mechanical seal. Delivery connection in BS, ISO, ASA, ANSI flanged ends and for hygienic applications, IDF /SMS/ Tri clover or equivalent are used. Bridge Breaker Paddle Assembly is available as option for products forming bridge while handling high consistency media and referred as KX-WBB series of Pumps. Salient features :

• Suitable for all media up to most thick pulpy consistency with highest content of solid or fibrous material
• Open hopper type inlet with force-feed screw upstream of rotor and stator
• Torsion-free metal bonded stator for increased stator life and higher efficiency per stage pressure
• Pulsation, turbulence, or aeration free metered flow proportional to the speed
• Capable of developing up to 48 Bar even at low pump speed
• Easy and quick maintenance, which does not require any special tools
• Temperature range from 40C to +200C

KB Series Progressive Cavity Pump comes with a portable design, vertical screw pumps for emptying barrels. Driven by vertical flange mounted geared or flanged Motors, the KB Series Progressive Cavity Pump is available in MS or SS construction with rotating parts to suit duty conditions. Shaft sealing is provided by soft gland packing / mechanical seal.