HYDRON ENGINEERS

Vatva, Ahmedabad, Gujarat

To save your precious time and manpower we offer you fully motorized pressure testing pump. Motorised pressure testing pump has superseded the traditional method of testing pressure with hand operated pumps. These pumps are largely used in industries to test the pressure of tubes, pressure vessels, casting and valves etc. Our pressure testing pump is remarkable for their accuracy and efficiency. Subsequently, we are acknowledged as one of the famous electric motorized pressure testing pump manufacturers. Applications Hydrostatic pressure testing of vessels, casting, tubes, valves. Lpg, nitrogen, oxygen cylinder testing. Boiler feed. Circulation water under pressure. High altitude pumping We provide pressure up to 750 kgcm2.

“Hi-Test” makes Diesel Engine driven Hydro Test Pumps are supplied based on client’s requirement. These pumps are designed to work at remote places wherein there is no availability of power supply, at remote places etc.

“Hi-Test” make Gear Drive Operated Hydro Testing Pumps are supplied based on requirement of client wherein V-Belt driven system is not acceptable. These pumps are designed to meet delivery pressure requirements upto 10000 PSI (700 Kg/cm²) pressure.

We offer a wide gamut of hand pressure test pump in the market. Hand pressure testing pump is broadly used for the construction of pipes and for testing pressure. Being portable in nature, it is extremely easy to move it from one place to other. Furthermore, we are well known as one of the major portable pressure testing pump suppliers in the market. Design FeaturesThe test pump is very compact, light in weight and can be unbolted to carry easily.Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts are made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily. How to OperateThe following instruction will help in smooth operation of the pump.Fill the tank with clean water only. If dust or other foreign particles enter the valves through water will result in pressure dropping.Before starting operation, the pressure release valve should be kept open and water should be allowed to drain out for a few strokes, then close the valve and build the required pressure. This is to remove air or else constantpressure cannot be maintained.Maximum length of the stoke can be used while beginning and should be progressively reduced when the pressure dropped.If the check valve is found disturbed and pump fails to develop pressure the valve seat should be cleaned or lapped if necessary.Suitable lubrication oil should be used to lubricate the plunger and ensure smooth operation.While keeping pump idle, apply lubricant oil and insert the piston fully in the cylinder so that water contents will not remain inside the pump and shall be free from rusting.

We Offer a Wide Gamut of Hand Pressure Test Pump in the Market. Hand Pressure Testing Pump is Broadly Used for the Construction of Pipes and for Testing Pressure. Being Portable in Nature, It is Extremely Easy to Move It from One Place to Other. Furthermore, We are Well Known as One of the Major Portable Pressure Testing Pump Suppliers in the Market. design Featuresthe Test Pump is Very Compact, Light in Weight and Can Be Unbolted to Carry Easily.stand is Designed in such a Way to Keep On Plane Surface and Operate Without Any Foundation. Even in High Pressure Pumps No Foundation is Required. all the Working Parts are Made of Ss to Stand the Specified Pressure. all Joints are Threaded So that Any Part Can Be Replaced On the Site Easily. how to Operatethe Following Instruction Will Help in Smooth Operation of the Pump.fill the Tank with Clean Water Only. if Dust or other Foreign Particles Enter the Valves Through Water Will Result in Pressure Dropping.before Starting Operation, the Pressure Release Valve Should Be Kept Open and Water Should Be Allowed to Drain Out for a Few Strokes, Then Close the Valve and Build the Required Pressure. this is to Remove Air or Else Constantpressure Cannot Be Maintained.maximum Length of the Stoke Can Be Used While Beginning and Should Be Progressively Reduced When the Pressure Dropped.if the Check Valve is Found Disturbed and Pump Fails to Develop Pressure the Valve Seat Should Be Cleaned or Lapped if Necessary.suitable Lubrication Oil Should Be Used to Lubricate the Plunger and Ensure Smooth Operation.while Keeping Pump Idle, Apply Lubricant Oil and Insert the Piston Fully in the Cylinder So that Water Contents Will Not Remain Inside the Pump and Shall Be Free from Rusting.

We offer a wide gamut of hand pressure test pump in the market. Hand pressure testing pump is broadly used for the construction of pipes and for testing pressure. Being portable in nature, it is extremely easy to move it from one place to other. Furthermore, we are well known as one of the major portable pressure testing pump suppliers in the market. Design FeaturesThe test pump is very compact, light in weight and can be unbolted to carry easily.Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts are made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily. How to OperateThe following instruction will help in smooth operation of the pump.Fill the tank with clean water only. If dust or other foreign particles enter the valves through water will result in pressure dropping.Before starting operation, the pressure release valve should be kept open and water should be allowed to drain out for a few strokes, then close the valve and build the required pressure. This is to remove air or else constantpressure cannot be maintained.Maximum length of the stoke can be used while beginning and should be progressively reduced when the pressure dropped.If the check valve is found disturbed and pump fails to develop pressure the valve seat should be cleaned or lapped if necessary.Suitable lubrication oil should be used to lubricate the plunger and ensure smooth operation.While keeping pump idle, apply lubricant oil and insert the piston fully in the cylinder so that water contents will not remain inside the pump and shall be free from rusting.

We offer a wide gamut of hand pressure test pump in the market. Hand pressure testing pump is broadly used for the construction of pipes and for testing pressure. Being portable in nature, it is extremely easy to move it from one place to other. Furthermore, we are well known as one of the major portable pressure testing pump suppliers in the market. Design FeaturesThe test pump is very compact, light in weight and can be unbolted to carry easily.Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts are made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily. How to OperateThe following instruction will help in smooth operation of the pump.Fill the tank with clean water only. If dust or other foreign particles enter the valves through water will result in pressure dropping.Before starting operation, the pressure release valve should be kept open and water should be allowed to drain out for a few strokes, then close the valve and build the required pressure. This is to remove air or else constantpressure cannot be maintained.Maximum length of the stoke can be used while beginning and should be progressively reduced when the pressure dropped.If the check valve is found disturbed and pump fails to develop pressure the valve seat should be cleaned or lapped if necessary.Suitable lubrication oil should be used to lubricate the plunger and ensure smooth operation.While keeping pump idle, apply lubricant oil and insert the piston fully in the cylinder so that water contents will not remain inside the pump and shall be free from rusting.

We offer a wide gamut of hand pressure test pump in the market. Hand pressure testing pump is broadly used for the construction of pipes and for testing pressure. Being portable in nature, it is extremely easy to move it from one place to other. Furthermore, we are well known as one of the major portable pressure testing pump suppliers in the market. Design FeaturesThe test pump is very compact, light in weight and can be unbolted to carry easily.Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts are made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily. How to OperateThe following instruction will help in smooth operation of the pump.Fill the tank with clean water only. If dust or other foreign particles enter the valves through water will result in pressure dropping.Before starting operation, the pressure release valve should be kept open and water should be allowed to drain out for a few strokes, then close the valve and build the required pressure. This is to remove air or else constantpressure cannot be maintained.Maximum length of the stoke can be used while beginning and should be progressively reduced when the pressure dropped.If the check valve is found disturbed and pump fails to develop pressure the valve seat should be cleaned or lapped if necessary.Suitable lubrication oil should be used to lubricate the plunger and ensure smooth operation.While keeping pump idle, apply lubricant oil and insert the piston fully in the cylinder so that water contents will not remain inside the pump and shall be free from rusting.