Central Mining Store

Denpasar, Indonesia

Hash rate: 110 Mhs = 110, 000KHsProcessor Chips: Coincraft A2 Modules: module boards +- 10% tolerance.Access: Web based interface via IP address -Software: CGminer 3.1.1Power consumption: about 1000 watts from the wallPower Supply: 1000 Watts Gold plus 80Power connection: 110-230VNetwork connection: Ethernet CableCooling: two x 12cm PWM fans and customized heat sinksStand alone: Mines alone without a PC connection requiredPackaging materials: foam + cartonPackage contents: 1 Miner, 1 Power Cord, 1 Network cable (power supply inlucded)Total weight: 40lbs

Chip SpecsDeveloped on 28nm using very low power design techniques and best efficiency.Custom IC package with power bars for low voltage, high current feeding.Configurable in daisy chain mode for distributed work with up to 253 ASICs.Standard SPI interface with CS pin needed to enclose all useful SDI and SDO data.27 highly optimized hashing engines based on custom ASIC cells up to 1.6M.Built-in redundancy architecture to allow for bad engines to be bypassed without affecting mining operation.Flexibility to configure the PLL clock and computation performance.Hashing power of 1.6M in nominal and 1.8M in Turbo mode.Power usage of 10W in typical nominal and 12W in typical Turbo mode.Supply voltage of 0.78V in low power, 0.84 V in Turbo mode for ICs.No need for special cooling, just regular top and bottom heat sinks plus fan cooling. *Includes 1100W PSU - up to 1200w at the wall power draw*

Hash Rate: 600MHs(10%) Power: 160W(5%) @ 0.27JMH (at the wall , with 25? ambient temp) Power supply: DC 12V 5A Power Adapter with @2.5 DC Plug (Not included) Interface: Ethernet Operation Temp: 0 -40 ? Dimension: 400mm (L) x 200mm (W) x 150mm (H)

Algorithm:X11 X13 X14 X15 Quark QubitHash Rate:300MHs(10%)Power supply:12V 6PIN(12V10A DC )Interface:EthernetTemp Operation:0 40 ?Dimension:135mm(L) x 135mm(W) x108mm(H)Weight:810g

Algorithm:X11 X13 X14 X15 Quark QubitHash Rate:1200MHs(10%)Power supply:12V 10A DC ATX 6pin PowerInterface:1 X EthernetTemp Operation:0 40 ?Dimension:135mm(L) x 135mm(W) x425mm(H)Weight:3010g

Brand BLESSINGHASHHashing Speed 1200MHs Scrypt MiningAlgorithm Scrypt MiningPower Consumption 1000 WattsChip Minion2 ASIC Chip Scrypt MinerData Interface USB 3.0 , USB 2.0 and Ethernet 100 MbpsWarranty 10 Years For order and more information about our product list, please visit to our official website company central-bitcoin .

Hash rate: 30 Mhs = 30, 000KHsProcessor Chips: LK Group 55nm ASIC ChipsModules: 4 module boards (7.5 MHs per board) +- 10% tolerance.Access: Web based interface via IP address -Software: CGminer 3.1.1Power consumption: about 1020 watts from the wallPower Supply: 1000 WattsPower connection: 110-230VNetwork connection: Ethernet CableCooling: two x 12cm PWM fans and customized heat sinksStand alone: Mines alone without a PC connection requiredPackaging materials: foam + cartonPackage contents: 1 Miner, 1 Power Cord, 1 Network cableTotal weight: 40lbs

Hash rate: 60 Mhs = 60, 000KHsProcessor Chips: Coincraft A2 (32 Chips)Modules: 4 module boards +- 10% tolerance.Access: Web based interface via IP address -Software: CGminer 3.1.1Power consumption: about 900 watts from the wallPower Supply: 1000 Watts Gold plus 80Power connection: 110-230VNetwork connection: Ethernet CableCooling: two x 12cm PWM fans and customized heat sinksStand alone: Mines alone without a PC connection requiredPackaging materials: foam + cartonPackage contents: 1 Miner, 1 Power Cord, 1 Network cable (power supply inlucded)Total weight: 40lbs

Innosilicon, the worlds leading supplier of advanced mining asic, proudly presents its next generation x11 miner, a5 dashmaster, at 30.2gh performance in 750w low power mode (factory default) and can reach up to 38gh in overclocked mode. It is so advanced, so far ahead in the field that it possesses >3.2x mining efficiency and up to 2.6x hash rate advantage over its closest competitor, which means overall >3x better, significantly longer life time, huge competitive advantage especially when hash rate increases rapidly, lower operating cost, and higher roi in all conditions. Smart buyers know that the safest buy is to buy miners that last to make a profit instead of becoming obsolete. A5 dashmaster is the ultimate x11 miner to own and to resell for the years to come.Hash rate: 30.2ghs(+-8%, in 750w normal mode)38 ghs(+-8%, in 1250w overclock mode)power consumption: 750w ( normal mode, at the wall, with 93% efficiency psu, 25c temperature )chip type: a5 dashmaster asicdimensions: single tube, 400mm(l) x 135mm(w) x 158mm(h)weight: 4.8kgoperating temperature: 0c85c (device junction temperature)network connection: ethernet

Brand MinersLabHashing Speed 300MHsHashing Algorithm ScryptPower Consumption 430 WattsChip 20nm HPP (High Performance Process)Data Interface USB 2.0, Ethernet 100 MbpsWarranty 15-year For order and more information about our product list, please visit to our official website company central-bitcoin .

Brand MinersLabHashing Speed 900MHsHashing Algorithm ScryptPower Consumption 830 WattsChip 20nm HPP (High Performance Process)Data Interface USB 2.0, Ethernet 100 MbpsWarranty 15-year For order and more information about our product list, please visit to our official website company central-bitcoin .

Brand MinersLabHashing Speed 8THsHashing Algorithm SHA-256Power Consumption 1600 WattsChip 20nm HPP (High Performance Process)Data Interface USB 2.0, Ethernet 100 MbpsWarranty 10-year For order and more information about our product list, please visit to our official website company central-bitcoin .

Brand minerslabhashing speed 10thshashing algorithm sha-256power consumption 1900 wattschip 20nm hpp (high performance process)data interface usb 2.0, ethernet 100 mbpswarranty 10-year for order and more information about our product list, please visit to our official website company central-bitcoin .

Minerslabhashing speed 20thshashing algorithm sha-256embedded psu 2100 wattsestimate power consumption 0.102 watt per 1ghschip 16nm hpp (high performance process)control unit embedded, with pre-installed os and mining softwaredata interface usb 3.0, ethernet 100 mbpswireless connection wi-fi (802.11a, 802.11bgn, 802.11ac)warranty 5-year for order and more information about our product list, please visit to our official website company central-bitcoin .

R4-BOX, 450GHS HashRate: 480510GHS;Power Consumption: 480510W;Cooling: Air cooling system;General Size: 400mm*170mm*190mmBlade: 160mm*170mmNet Weight: 4.5KGPSU: 4*6PIN PCI-EController: Raspberry PiNoise: 54DBOthers: USB lines, Raspberry Pi and SD card included for each unit This version, you can adjust the chip frequency from the Web GUI

A very high quality unit with elegant control software. Widely thought to be among the best miners made. One of our staff runs these devices and on 110 volts has observed power usage as low a .75watts per GHs. Which even today is near state of the art. Operating on 220 volt will maximize performance with of course a bit more power usage. You choose. Call with questions. Shipping included in the lower 48 States power cord not included. For order and more information about our product list, please visit to our official website company central-bitcoin .

Features: Newest 16nm 3D FinFET technology (How FinFET works? https:www.youtube.comwatch?v=Jctk0DI7YP8)20 THs (20000 GHs) 2% (Nominal Speed)Stand-Alone unitDual-LAN (front, back) Modes: - Eco (14 THs, 40 dB, 700 W)- Nominal (20 THs, 55 dB, 1100 W)- Overclock (22 THs, 60 dB, 1300 W)- Overclock+, Available separately in the upgrade section (25 THs, 60 dB, 1500 W) Power: - Power consumption: 700-1300 W (at the wall)- Power efficiency: 0.05-0.06 WattGHs PSU: - 2000 W built-in (Super Flower Leadex Platinum 2000)- Average efficiency: 94%- Certified: 80 PLUS Platinum (CE)- 100 V 240 V (Active PFC) Dimensions: - 432*133*442 mm- Size: Rack-mountable 3U (Kit included) Weight: ca. 15 kg Full scaleable (Plug & play upgrade kits, Q22016)Easy to use Web-GUI Accessories: - Ethernet cable- Power cord For order and more information about our product list, please visit to our official website company central-bitcoin .

Features: Newest 16nm 3D FinFET technology (How FinFET works? 10 THs (10000 GHs) 2% (Nominal Speed)Stand-Alone unitDual-LAN (front, back) Modes: - Eco (7 THs, 40 dB, 370 W)- Nominal (10 THs, 55 dB, 580 W)- Overclock (11 THs, 60 dB, 700 W)- Overclock+, Available separately in the upgrade section (12.5 THs, 60 dB, 800 W) Power: - Power consumption: 370-700 W (at the wall)- Power efficiency: 0.05-0.06 WattGHs PSU: - 1600 W built-in (EVGA SuperNOVA G2 1600)- Average efficiency: 90%- Certified: 80 PLUS Gold (CE)- 100 V 240 V (Active PFC) Dimensions: - 432*133*442 mm- Size: Rack-mountable 3U (Kit included) Weight: ca. 10 kg Full scaleable (Plug & play upgrade kits, Q22016)Easy to use Web-GUI Accessories: - Ethernet cable- Power cord Warranty: 2 Years

In-stock with immediate shipping! Can be connect directly to computer OR controlled by Raspberry Pi. Very easy to use and stable. Supports cgminer or bfgminer. We provide software and instructions on how to setup. Simple plug and play and you are ready to start mining. Also if you buy 2 x Rockminer R3 then you will get one free Raspberry Pi. One Raspberry Pi can run 6+ Rockminer R3 units. We guarantee all R3 miners will hash between 480 - 520 GHs!! SpecificationsHashRate: 470 - 520 GHSPower Consumption: 480-500W Cooling: Air Cooled HeatsinksSize: 400*170*190mmEach Blade: 160mm*170mmWeight: 4.5 kg PSU: 4*6PIN PCI-E Power Required Noise: 56DB Supported Operating systems- Windows, Mac, Raspberry Pi, Linux

Rockminer have done it again and delivered an outstanding product with superb performance. Based on the Gen3 ASICMINER chips. It has a hash speed of 400 450 GHs! Uses a ATX Powersupply (500 - 800 watts). Can be controlled by Raspberry Pi or connected directly to a computer. In-stock with immediate shipping! Specifications HashRate: 440 480 GHS Power Consumption: 480-500W Cooling: Air Cooled Heatsinks Size: 210*230*230mm Each Blade: 160mm*170mm Weight: 7 kg PSU: 4*6PIN PCI-E Power Required [Sold Separately] Controller: Raspberry Pi [Sold Separately] Noise: 65DB

In-stock with immediate shipping! This is the most stable of all the Rockminer R series miners. Design is made to be easily stacked. Can be connect directly to computer OR controlled by Raspberry Pi. Very easy to use and works with cgminer or bfgminer. We provide software and instructions on how to setup. Also if you buy 2 x Rockminer R4 then you will get one free Raspberry Pi. One Raspberry Pi can run 6+ Rockminer R4 units. We guarantee all R4 miners will hash between 480 - 520 GHs!! SpecificationsHashRate: 480 - 550 GHSPower Consumption: 480-500W Cooling: Air Cooled HeatsinksSize: 336*230*192mmEach Blade: 160mm*170mmWeight: 5.5 kg PSU: 4*6PIN PCI-E Power Required Noise: 56DB Supported Operating systems- Windows, Mac, Raspberry Pi, Linux Supported Mining Software- cgminer, bfgminer, minepeon

Algorithm : X11 X13 X14 X15 Quark QubitHash Rate : 900MHs(10%)Input Power : ATX Power, 12V Plug 6P8PInterface : 1 x EthernetOperation Temp : 0 40 ?Dimension : 300mm(L) x 123mm(W) x 123mm(H)Weight : 2550g1. Hash Rate and PowerGiant-A900 miner1) X11 : 900MHs 217W2) X13 : 900MHs 255W3) X14 : 900MHs 263W4) X15 : 900MHs 270W5) Quark : 900MHs 132W6) Qubit : 900MHs 146W For order and more information about our product list, please visit to our official website company central-bitcoin .