Medan Electronic

Medan, Indonesia

Specifications:
Length:393mm (without wing) up to 424mm (with wing)
Wheelbase:283-294mm
Width:322-330mm
Weight:1850-2025g depending upon the equipment used
Diff Ratio:F/R 10/40t, Center 53t
Battery tray dimensions: 96x47x26mm
Kit/RTR:Kit

Needed to Complete:

• 2/3 channel radio/transmitter
• 1/10 scale Buggy or Short Course ESC
• 540 size 6.5-8.5 turn or 540 size 4 pole 4000-4600kv motor
• High torque steering servo (at least 200oz/in)
• 32 pitch 15 to 19 tooth pinion
• 2s shorty LiPo battery (at least 5000mAh)
• 1/10th scale Associated offset stadium truck OR Traxxas Slash SC offset wheels and tires
• CA glue
• Paint for the body
• Tools for assembly

• Lightweight high down-force wing:
• The Redesigned IFMAR legal wing is lightweight and provides amazing down force and corning. The underside of the wing uses a fresh design to reduced weight and creates additional down-force.
• Battery tray and receiver box:
• The MBX8 Ecos battery tray allows you to position a 4S battery farther forward then with previous models. The receiver box is also new for the MBX8 Eco.
• Other redesigned parts and upgrades:
• Body, Clamping Servo Saver Nut, F/R Shock Towers, Front bumper, Front center and rear center universal joint.

Needed to Complete:

• 1/8 Scale Brushless Motor & ESC
• 2-Channel Radio System
• High Torque Steering Servo
• (2) 2S LiPo Batteries or (1) 4S LiPo (at least 5000mAh)
• Compatible Battery Charger
• Paint for Polycarbonate Body
• Tires, Wheels & Glue

Next Generation E-Revo
With just a handful of parts carrying over from the previous generation, the next generation E-Revo packs dozens of upgrades to make it the ultimate go-to vehicle for insane stunts and backyard bashing.

• 70+ MPH Speeds
• Updated Tires & Wheels
• Updated Suspension Arms
• Updated Differentials
• Heavy-Duty 5mm Suspension Links
• Stronger Low CG Chassis
• MAXX-Spec Driveline
• Self Righting
• Brutal 6S Power

Specifications:
Power Source:Electric
Terrain:Off-Road
Body Style:Truck
Scale Size:1:10 Scale
Assembly Level:Kit*
Length:varies
Width:varies
Wheelbase:327mm (12.87in)
Weight:varies
Drive:2WD

Needed to Complete:

• 1:10 scale 540-size electric motor
• 1:10 scale electronic speed control
• 7.4V LiPo or 6.6V LiFe shorty pack battery
• Battery charger (able to charge one of the batteries mentioned above)
• 2-channel surface transmitter, and its batteries
• 2-channel receiver
• Steering servo
• Pinion gear (48 pitch)
• Spray paint for Polycarbonate body
• 1:10 scale short course 12mm hex wheels
• 1:10 scale short course truck tires
• Glue for tires and wheels
• 1:10 scale short course body

Specifications:Length:27.32 inches (694mm)
Front Track:13.57 inches (345mm)
Rear Track:13.57 inches (345mm)
Ground Clearance:2.27 inches (58mm)
Weight:13.4lb (6.1kg)
Height:10.29 inches (261mm)
Wheelbase:16.53 inches (420mm)
Front Shock Length:5.28 inches (134mm)
Front Threaded Shock Length:5.28 inches (134mm)
Rear Shock Length:6.3 inches (160mm)
Rear Threaded Shock Length:5.55 inches (139mm)
Tires (pre-glued):134mm x 57mm BFGoodrich KR3 replicas
Wheels:dual diameter 40mm x 56/81mm
Speed Control:Velineon VXL-6s
Motor (electric):2200kV

Includes:

• Unlimited Desert Racer with VXL-6s ESC and 2200kV motor
• Quick Start Guide
• TQi 2.4GHz radio system
• High quality maintenance tools

Needed to Complete:

• Single 4s LiPo battery or dual 2s LiPo batteries or dual 3s LiPo batteries with Traxxas iD connector
• Traxxas EZ-Peak Live charger
• (4) AA alkaline batteries for the transmitter

Specifications:
Length:17.7 in (450mm)
Width:8.3 in (212mm)
Height:4.3 in (110mm)

Includes:

• RTR Ford Mustang Hoonicorn On-Road Car
• Radio System
• Motor
• ESC
• NiMH Battery
• Battery Charger
• Painted Body
• (4) "AA" BatteriesInstruction Manual

Specifications:
Power Source:Electric
Terrain:Off-Road
Body Style:Truck
Scale Size:1:10 Scale
Assembly Level:Kit*
Length:368mm (14.49in)
Width:varies
Wheelbase:288mm (11.34in)
Weight:varies
Drive:2WD

Needed to Complete:

• 1:10 scale 540-size electric motor
• 1:10 scale electronic speed control
• 7.4V LiPo or 6.6V LiFe shorty pack battery
• Battery charger (able to charge one of the batteries mentioned above)
• 2-channel surface transmitter, and its batteries
• 2-channel receiver
• Steering servo
• Pinion gear (48 pitch)
• Spray paint for Polycarbonate body
• 1:10 scale 12mm hex truck wheels
• 1:10 scale truck tires
• Glue for tires and wheels

Specifications:
Length:393mm (without wing) up to 424mm (with wing)
Wheelbase:283-294mm
Width:246-250*mm (*optional hubs required)
Weight:1630 (or less) to 1780g depending upon equipment used
Diff Ratio:F/R 16/40t, Center 81t
Battery tray dimensions:96x47x26mm
Kit/RTR:Kit

Needed to Complete:

• 2/3 channel radio/transmitter
• 1/10 scale ESC and motor system
• High torque steering servo (at least 200oz/in)
• 48 pitch 17 to 34 tooth pinion
• 2s shorty LiPo battery (at least 4000mAh)
• 1/10th scale 4wd buggy tires, wheels & CA glue
• Paint for body

specifications:length:23.05 inches (585mm)
width:18.32 inches (465mm)
ground clearance:2.9 inches (73mm)
weight:11.2lb (5.08kg)
height:8.7 inches (221mm)
wheelbase:14.94 inches (380mm)
front shock length:3.42 inches (87mm)
rear shock length:3.42 inches (87mm)
tires (pre-glued):6.4 x 3.5 inches (162mm x 88mm)
wheels:3.8 inches (97mm)
speed control:velineon vxl-6s
motor (electric):2200kv
transmission:single speed
gear pitch:1.0 metric pitch (mod-1)
final drive ratio:20.49:1
differential type:sealed, 4-gear
center differential type:sealed, 4-gear (20m weight oil)
chassis structure / material:composite tub
brake type:electronic
drive system:shaft driven 4wd
steering:bellcrank
radio system:tqi 2-channel transmitter with tra6533 tsm receiver