Other Products / Services #3932547

Kaizen is a daily process, the purpose of which goes beyond simple productivity improvement. It is also a process that, when done correctly, humanizes the workplace, eliminates overly hard work ("muri"), and teaches people how to perform experiments on their work using the scientific method and how to learn to spot and eliminate waste in business processes.In all, the process suggests a humanized approach to workers and to increasing productivity: "The idea is to nurture the company's human resources as much as it is to praise and encourage participation in kaizen activities. "Successful implementation requires "the participation of workers in the improvement."

"Quality management". This means what the organization does to fulfil:The customer's quality requirements, and Applicable regulatory requirements, while aiming to Enhance customer satisfaction, and Achieve continual improvement of its performance in pursuit of these objective.

Reduced operating costs - by decreasing down-time through incidents and ill health and reducing costs associated with legal fees and compensationImproved stakeholder relationships - by safeguarding the health and property of staff, customers and suppliersLegal compliance - by understanding how statutory and regulatory requirements impact the organization and its customersImproved risk management - through clear identification of potential incidents and implementation of controls and measuresProven business credentials - through independent verification against recognized standards

Provides guidelines on the provision of Information and Communications Technology Disaster Recovery (ICT DR) services as part of business continuity management, applicable to both in-house and outsourced ICT DR Service providers of physical facilities and services.The requirements for implementing, operating, monitoring and maintaining ICT DR services and facilities;The capabilities which outsourced ICT DR Service providers should possess and the practices they should follow, so as to provide basic secure operating environments and facilitate organizations' recovery efforts; the guidance for selection of recovery site; and the guidance for ICT DR Service providers to continuously improve their ICT DR services.

To develop and implement a policy and objectives which take into account legal requirements and other requirements to which the organization subscribes, and information about significant environmental aspects.It applies to those environmental aspects that the organization identifies as those which it can control and those which it can influence. It does not itself state specific environmental performance criteria

Can be used by any public, private or community enterprise, association, group or individual. Therefore, ISO 31000:2009 is not specific to any industry or sector.Can be applied throughout the life of an organization, and to a wide range of activities, including strategies and decisions, operations, processes, functions, projects, products, services and assets.Utilized to harmonize risk management processes in existing and future standards. It provides a common approach in support of standards dealing with specific risks and/or sectors, and does not replace those standards.

To promote improved conditions for workers through the implementation of codes of Labour practice based on national law and international Labour standards.To promote respect for workers rights and to achieve real improvements in working conditions within their supply chain.Member companies should give special attention to the rights of workers most vulnerable to abusive Labour practices, notably women, home workers, agency workers, temporary workers, migrant workers and smallholders.

5 primary phases of 5S: sorting, straightening, systematic cleaning, standardizing, and sustaining. Additionally, there are three other phases sometimes included; safety, security, and satisfaction.To organize a work space for efficiency and effectiveness by identifying and storing the items used, maintaining the area and items, and sustaining the new order.The decision-making process usually comes from a dialogue about standardization which builds a clear understanding among employees of how work should be done. It also instills ownership of the process in each employee.

The Six Sigma Certification system of business management has had considerable success and now enjoys an ever- growing following consisting mainly of manufacturing firms out to improve the quality of their production and make considerable cuts in their expenditures.Times like we have now perfectly justify looking for alternative paths to make your products more marketable and to make more savings on your time, manpower and resources.

Lean manufacturing, often called Lean production or simply Lean, is a practice that is considering the expenditure of resources for goals other than creation of the value for end customer to be wasteful and a target for elimination.Working from perspectives of the customers who make used of the products, value is simply defined as any process or action that a customer is willing to pay for. Meaning, the lean is centered on preserving the value with a lesser work.

Good Manufacturing Practice (GMP) is that part of quality assurance which ensures that medicinal products are consistently produced and controlled to the quality standards appropriate to their intended use and as required by the marketing authorisation (MA) or product specification. GMP is concerned with both production and quality controlThe control and management of manufacturing and quality control testing of foods, pharmaceutical products and medical devices.These requirements concern methods, equipment or testing, which are used for the production, processing, packaging and / or storage of drugs. This ensures that medicine products fulfil the necessary quality criteria.

An environmental impact assessment is an assessment of the possible positive or negative impact that a proposed project may have on the environment, together consisting of the natural, social and economic aspects.The purpose of the assessment is to ensure that decision makers consider the ensuing environmental impacts when deciding whether to proceed with a project."The process of identifying, predicting, evaluating and mitigating the biophysical, social, and other relevant effects of development proposals prior to major decisions being taken and commitments made."EIAs are unique in that they do not require adherence to a predetermined environmental outcome, but rather they require decision makers to account for environmental values in their decisions and to justify those decisions in light of detailed environmental studies and public comments on the potential environmental impacts of the proposal.

It is applicable to all organizations performing tests and/or calibrations. These include, for example, first-, second- and third-party laboratories, and laboratories where testing and/or calibration forms part of inspection and product certification.It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods.

To develop and implement a policy and objectives which take into account legal requirements and other requirements to which the organization subscribes, and information about significant environmental aspects.It applies to those environmental aspects that the organization identifies as those which it can control and those which it can influence. It does not itself state specific environmental performance criteria

Specifies requirements for establishing, implementing, maintaining and improving an energy management system.To enable an organization to achieve continual improvement in its energy use and consumption or energy performance through a systematic approach.ISO 50001:2011 does not define specific energy consumption criteria but requires organizations to define its energy performance indices and targets and achieve them by implementing a proper action plan.

It aims to be a first step in helping all types of organization in both the public and private sectors to consider implementing ISO 26000 as a way to achieve the benefits of operating in a socially responsible manner. Communicating commitments, performance and other information related to social responsibility.

To establish and maintain a security management system (SMS), You will improve the overall security of your supply chain and inspire the trust of your customers. help you to preserve the integrity of your shipments and safeguard your customers valuable property, Help you to protect personnel. When properly implemented, It can also help you to reduce theft and combat smuggling, piracy, and terrorism.

To provide framework for internationally harmonized requirements for systematically managing safety in food supply chains.This standard integrates the principles of Hazard Analysis and Critical Control Point (HACCP) system developed by Codex Alimentarius Commission and combines the HACCP plan with Prerequisite Programs (PRPs)Systematic identification and management of food safety hazards. Greater confidence for safety of food and related products served and delivered. Food safety assurance in food chain

To design, implement, manage, maintain and enforce information security processes and controls systematically and consistently throughout the organizationsThe standard covers all types of organizations (e.g. IT & Non IT, commercial enterprises, government agencies and non-profit organizations) and all sizes from micro-businesses to huge multinationals. Bringing information security under management control is a prerequisite for sustainable, directed and continuous improvementInformation security controls are not merely specified and implemented as a one-off activity but are continually reviewed and adjusted to take account of changes in the security threats, vulnerabilities and impacts of information security failures, using review and improvement activities specified within the management system.

It specifies requirements for the service provider to plan, establish, implement, operate, monitor, review, maintain and improve a Service Management System.The requirements include the design, transition, delivery and improvement of services to fulfill agreed service requirements.

By helping to put the fundamentals of a BCM system in place, the standard is designed to keep your business going during the most challenging and unexpectedcircumstances protecting your staff, preserving your reputation and providing the ability to continue to operate and trade.

To enable an organization to prove that it is performing software asset management (SAM) to a standard sufficient to satisfy corporate governance requirements and ensure effective support for IT service management overall.To align closely to, and to support, ISO/IEC 20000. Good practice in SAM should result in several benefits, and certifiable good practice should allow management and other organizations to place reliance on the adequacy of these processes. The expected benefits should be achieved with a high degree of confidence.This standard establishes a structured baseline for organizations to implement an integrated set of processes for Software Asset Management (SAM).The aim of the standard is to help you achieve good practice and manage your software more efficiently so that management and other organizations can be confident of the quality and adequacy of your processes.

SA8000 is a global social accountability standard for decent working conditions, developed and overseen by Social Accountability International (SAI).Standard based on international workplace norms of International Labour Organization (ILO) conventions, the Universal Declaration of Human Rights and the UN Convention on the Rights of the Child. This standard is the benchmark against which companies and factories measure their performance. Those seeking to comply with SA8000 have adopted policies and procedures that protect the basic human rights of workers.

Green Globe Certification is the travel and tourism industries' world wide certification label for sustainable management and operations.The system guarantees an efficient process and keeps the business up-to-date at all times.To guarantee adherence to the highest international standards, a third-party independent auditor is appointed to work with clients on-site.Provides certification standards for the following Industry categories: Attraction, Business (Whole Sale / Retail) , Cruise Ships (River & Ocean), Golf Course , Hotel & Resort , Meeting & Events , Organization , Restaurant , Spa, Health Center , Transportation (Mass Transportation, Bus Company, Limousine Service, Car Rental) , Travel Industry (Tour Operators, Destination Management Company, Meeting & Incentive Industry)

Maturity Level" X means that an organization, when appraised, was found to be achieving the goals required by process areas in that level (X). Those goals are a combination of specific and generic goals from a specific set of Process Areas(PA). Each "Maturity Level" has a specific set of PAs associated with it, and in turn, within those PAs have a specific set of goals.

Seven Process areas need to be covered for a defined set of projects that should be representative of the organizations activities: Requirements Management, Project Planning, Project Monitoring and Control, Supplier Agreement Management, Measurement and Analysis, Process and Product Quality Assurance and Configuration Management

Eighteen Process areasto master (11 more than Level 2): Requirements Development, Technical Solution, Product Integration, Verification, Validation, Organization Process Focus, Organization Process Definition, Organization Training, Integrated Project Management, Risk Management and Decision Analysis and Resolution.

Requires the ML 2 and 3 PAs, plus the following PAs be performed up to and including Generic Goal 3 within all of them: Organizational Process Performance (OPP) and Quantitative Project Management (QPM)

Requires the ML 2-4 PAs, plus the following PAs be performed up to and including Generic Goal 3 within all of them: Organizational Performance Management (OPM) and Causal Analysis and Resolution (CAR)

Total Quality Management (TQM) is the organization-wide management of quality. Management consists of planning, organizing, directing, control, and assurance. Total quality is called total because it consists of two qualities: quality of return to satisfy the needs of the shareholders, or quality of products.Total Quality Management is a business management strategy aimed at embedding awareness of quality in all organizational processes. TQM has been widely used in manufacturing, education, hospitals, call centers, government, and service industries.The standard was developed to assist retailers in their fulfillment of legal obligations and protection of the consumer, by providing a common basis for the audit ofcompanies supplying retailer branded food products.

To ensure that their items are manufactured to specific requirements including identity, strength, quality, and purity. Good Manufacturing Practices are regulated by the Food and Drug Administration (FDA).

E mark from the Economic Commission for Europe (Economic Commission of Europe, referred to as ECE) regulations promulgated by (Regulation).E signs the certificate of product components and a system component is not the appropriate vehicle certification regulations. Access to E logo certified products, is accepted by the market.E common signs of domestic products are certified automotive light bulbs, glass, tires, triangular warning signs, and automotive electronic products.

Improve the environment by reducing toxic pollution and waste, conserving resources and habitats, and minimizing global warming and ozone depletionIncrease the health and well-being of your customers, particularly those most affected by product choice, such as schoolchildren, service staff, and the elderlyDemonstrate that environmentally responsible products and services can meet or exceed performance and quality expectations Gain access to new customers and high-value niche marketsIncrease customer loyalty among your core clienteleImprove community relationsBoost your profitability and enhance your brand

Standard covers the processing, manufacturing, packaging, labelling, trading and distribution of all textiles made from at least 70% certified organic natural fibres. The final products may include, but are not limited to fibre products, yarns, fabrics, clothes and home textiles.The standard focuses on compulsory criteria only. Some of the criteria are compliance requirements for the entire facility where GOTS products are processed (2.4.10. Environmental management, 2.4.11. Waste water treatment, 3. Minimum social criteria and 4.1. Auditing of processing, manufacturing and trading stages), whereas the others are criteria relevant for the specific products subject to certification (all other criteria of chapter 2 and chapter 4.2. of this standard).As it is to date technically nearly impossible to produce any textiles in an industrial way without the use of chemical inputs, the approach is to define criteria for low impact and low residual natural and synthetic chemical inputs (such as dyestuffs, auxiliaries and finishes) accepted for textiles produced and labelled according to this standard.

Forest managers or owners who want to prove that their forest operation are socially beneficial and managed in an environmentally appropriate and economically viable manner can apply for forest management (FM) certification.Special options for small, low-intensity and community forest operations

Third Party Inspection, Pre-shipment import, Export Inspection, Vendor Assessments, Carbon Footprint Verification, Greenhouse Gas Emission Verification, Materials Testing, Non-Destructive Testing Services, Valve and instrumentation Calibration and Maintenance, Product Certification, Project management like Building Inspection and certification, Technical Staffing Services, Wind Farm Project Certification, Supply Chain Services, Superintendence of Loading/Unloading, Survey, Safety Audit, Insurance Solutions, Industrial Risk Analysis - RRA (Rapid Risk Assessment), EIA (Environmental Impact Assessment), Safety Risk Analysis, Disaster Management Plan, HAZOP Study, Fire Safety Study, HSE (Health Safety & Environment Study)

Software applications and specifications and testing , used in industries, business, households, entertainment of medical, health, pharmaceuticals, biotech, railways, airline, insurance, banking, government departments, Defence, space, education & other fields, and for the purpose to do web designing, web based information system, client-server applications, enterprise resource planning, network management and to establish & maintain portals, to act as internet service provider, to develop e-commerce activities, to commercialize internet applications, to develop consumer oriented electronic commerce, to create digital signatures & system in demands. To develop education & digital copyrights, to create domain names & all other allied services & activities used for the information technology business & for the purpose to act as representative, advisor, consultant, know-how provider, sponsor, franchiser, licenser, job worker & to do all other acts & things necessary for the attainment of the foregoing objects.