Our Products
AGROVISION TRACTOR CRAIN is basically tractro drawn mounted on hydraulic system. It helps for standing/Iraction the electricity pole, Telephone pole, Iron Tower etc.
Advantage
The AGROVISION Tractor Crain is fastest method for stand electricity pole.
Easily Light load goods loading & unloading.
TRACTOR CRANE | MODEL : A-TC |
FRAME | 75X200 mm Channel Heavy Duty |
JACK | 3 No. Hydraulic 2 Stage |
HYDRAULIC PIPE | Heavy Duty |
APPROX. WEIGHT | 1000 Kg. |
HYDRAULIC POST HOLE DIGGER | MODEL : A-HPHD |
PTO RPM | 540 |
REQUIRED POWER | 40 Hp & Above |
MAIN FRAME | 115 mm Seamless Tube |
HYDRAULIC JACK | 1. No Duble Acting (With Control Panel) |
GEAR BODY | Made By Graded C.I. |
OIL CAPACITY | 5 Liter - SAE 140 |
GEAR, RATIO | Bevel 2: 1 |
BEARINGS | All Taper Roller |
PTO | Telescope Type |
AUGER POINT | Steel with Carbide Bit (Replaceable) |
AUGER BLADE | High Carbon with Carbide Tips |
NUT / BOLTS | High-Tensile |
OUTPUT CAPACITY | 1 Hr. / 60 Hole or (Depends on Soil) |
APPROX WEIGHT | 400 Kg. |
AUGUR SIZE | 12’’ Dia.x72’’ Depth |
AGROVISION TRACTOR TRENCH DIGGER cuts with a digging chain that is driven around a rounded metal frame, or boom.
Advantages
AGROVISION TRENCH DIGGER can cut narrow and deep trenches.
The angle of the boom can be adjusted to control the depth of the cut.
To cut a trench, the boom is held at a fixed angle while the machine creeps slowly.
Features
To cut a trench, the boom is held at a fixed angle while the machine creeps slowly.
Reliable & heavy duty hydraulic cylinder that works under varying work conditions.
Easy Depth adjustment.
MODEL | A-TTD |
BODY FRAME | 150x150 mm & 175x175 mm Square Box |
LENGHT | 1875 mm |
WIDTH | 1475 mm |
HEIGHT | 1200 mm |
WORKING WIDTH | 200 mm / 225 mm (Optional) |
CHAIN WIDTH | 50 mm |
NO. BLADES | 100 & Above |
NO. HYDRAULIC JACK | 02 (Two Way) |
TYPE OF BEARINGS | Tapper Roller |
NO. OF GEAR BOX | 2 |
REQUIRE POWER HP | 65 HP & Above |
APPROX. WEIGHT | 800 Kgs. |
Single Post Hole Digger are ideal for a wide variety of applications- like fencing/ tree plantations. Auger size can be decided as per the required hole size. The digging gets done at a faster pace and neater way as compared to manual digging. The post hole digger is one of the equipments that have to be found in each agricultural establishment and farm. It is connected to the tractor easily by three point hitch system. You can drill holes with 800-1800 mm depth and 20, 30, 45, 60, 80 cm diameters quickly and economically. Post Hole digger is used in three planting, wire fencing, etc. In suitable landscapes you can dig 40 holes with 300 mm diameter in one hour, 30 holes with 450 mm diameter and 15 holes with 600 mm diameter in one hour.
Advantages
AGROVISION POST HOLE DIGGER is tractor PTO driven implement to drill holes of 12, 18, 24 and 36 width hole for plantation & commercial purposes. The maximum depth, which can be obtained of 90cm tractor mounted.
The AGROVISION POST HOLE DIGGER is fastest method to dig holes as it is P.T.O. driven implement.
Replaceable auger with the same frame as per the hole diameter required.
Made for all types of soil
Easy to transport.
Features
Hole Digger is equipment, which can drill/dig holes of various sizes and depths in soil.
Hole Digger is used to make pits for plantation of mango, coconut, teak, pomegranate, lemon, phyllanthus embolic & sugarcane etc.
Tractor PTO of 540 RPM mechanically drives Hole Digger Augur.
Hole Digger consists of a stabilizer system, which keeps the augur perpendicular to the ground while in operation and controls swinging of augur while moving from one point to another point.
Hole Digger Augur end points and the bending blades are made replaceable.
Hole Digger Gearbox, Power Transmission, Shaft and spirals are most important.
Heavy duty tubular frame.
Special steel grade cast cutting tip with semi-double flighting.
It has heavy duty gear box with output shaft with shear pin protection |
MODEL | A-PHD |
FRAME | Heavy Duty seamless tubular |
HITCH | Category I & Category II |
GEAR BOX | Compatible with 50 HP maximum |
OUTPUT SHAFT | 55 mm |
INPUT RPM | 540 |
FASTENERS | High tensile |
PROTECTION DEVICE | Shear-pin |
AUGER LENGTH | 1000 mm |
AUGER SIZES | 12”, 18”, 24”, 36” |
AUGER BLADE | With carbide bits (replaceable ) |
AUGER POINT | Replaceable |
APPROX. WEIGHT | 300 kg. with 450 x 900 mm auger |