Write a Review
Our Products
We offer the best product range of Pillow Block Bearing, Thrust Needle Roller Bearing, Digital Caliper, Aluminium Spirit Level W Magnet and Hand Riveter POP Rivet Gun.
Physical & Mechanical Properties
| Items | Value | Unit | |
| Thermal Conductivity | 40 | W/mK | |
| Maximum Operating Temperature Tmax | 280 | °C | |
| Minimum Operating Temperature Tmin | -200 | °C | |
| Compressive Yield Strength | 350 | N/mm2 | |
| Maximum Static Load Psta,max | 250 | N/mm2 | |
| Maximum Dynamic Load Pdyn,max | 140 | N/mm2 | |
| Maximum Sliding Speed V-dry | 2.5 | m/s | |
| Maximum PV Factor-dry, continuous operation | 1.8 | N/mm2 * m/s | |
| Maximum PV Factor-dry, intermittent operation | 3.5 | N/mm2 * m/s | |
| Coefficient of friction f-dry | 0.02-0.25 | ||
| Coefficient of friction f-oil lubricated | 0.02-0.12 | ||
Usage Range:
| dry | good |
| oil lubricated | good |
| grease lubricated | fair |
| water lubricated | fair |
| process fluid lubricated | fair |
| Dimensions (mm) | Weight | |||
| Item No. | ||||
| Fw | D | C | (g) | |
| HK0306 | 3 | 6.5 | 6 | 1.0 |
| HK0509 | 5 | 9 | 9 | 2.0 |
| HK0608 | 6 | 10 | 8 | 2.1 |
| HK0709 | 7 | 11 | 9 | 2.3 |
| HK0808 | 8 | 12 | 8 | 2.7 |
| HK0810 | 8 | 12 | 10 | 3.0 |
| HK0908 | 9 | 13 | 8 | 3.0 |
| HK0910 | 9 | 13 | 10 | 4.0 |
| HK0912 | 9 | 13 | 12 | 4.6 |
| HK1010 | 10 | 14 | 10 | 4.1 |
| HK1012 | 10 | 14 | 12 | 4.8 |
| HK1210 | 12 | 16 | 10 | 4.6 |
| HK121612 | 12 | 16 | 12 | 9.0 |
| HK121712 | 12 | 17 | 12 | 9.0 |
| HK121812 | 12 | 18 | 12 | 9.0 |
| HK1312 | 13 | 19 | 12 | 8.9 |
| HK1412 | 14 | 20 | 12 | 10.5 |
| HK1512 | 15 | 21 | 12 | 11.1 |
| HK1516 | 15 | 21 | 16 | 15.0 |
| HK1612 | 16 | 22 | 12 | 11.7 |
| HK1616 | 16 | 22 | 16 | 15.8 |
| HK162222 | 16 | 22 | 22 | 21.7 |
| HK1812 | 18 | 24 | 12 | 13.1 |
| HK1816 | 18 | 24 | 16 | 17.5 |
| HK2020 | 20 | 26 | 20 | 24.1 |
| HK2512 | 25 | 32 | 12 | 20.0 |
| HK2520 | 25 | 32 | 20 | 24.1 |
| HK2526 | 25 | 32 | 26 | 44.8 |
| HK3012 | 30 | 37 | 12 | 24.0 |
| HK3016 | 30 | 37 | 16 | 32.0 |
| HK4012 | 40 | 47 | 12 | 31.1 |
| HK5012 | 50 | 58 | 12 | 44.2 |
| Dimensions (mm) | Basic Load Ratings (N) | Max. Speed (RPM) | ||
| Item No. | ||||
| Dynamic Cr | Static C0r | Oil | Grease | |
| HK0306 | 819 | 560 | 21,850 | 13,110 |
| HK0509 | 1,596 | 1323 | 18,000 | 10,800 |
| HK0608 | 1,330 | 1099 | 16,600 | 9,960 |
| HK0709 | 2,065 | 1960 | 14,700 | 8,820 |
| HK0808 | 1,820 | 1729 | 13,300 | 7,980 |
| HK0810 | 2,520 | 2625 | 13,300 | 7,980 |
| HK0908 | 2,359 | 2492 | 11,850 | 7,110 |
| HK0910 | 2,835 | 3080 | 11,850 | 7,110 |
| HK0912 | 3,528 | 4200 | 11,850 | 7,110 |
| HK1010 | 2,926 | 3395 | 11,850 | 7,110 |
| HK1012 | 3,640 | 4515 | 10,925 | 6,555 |
| HK1210 | 3,290 | 4130 | 10,925 | 6,555 |
| HK121612 | 4,305 | 4830 | 9,500 | 5,700 |
| HK121712 | 4,305 | 4830 | 9,500 | 5,700 |
| HK121812 | 4,305 | 4830 | 9,500 | 5,700 |
| HK1312 | 4,515 | 5250 | 7,000 | 4,200 |
| HK1412 | 4,760 | 5600 | 8,500 | 5,100 |
| HK1512 | 5,250 | 6265 | 7,600 | 4,560 |
| HK1516 | 6,965 | 9590 | 7,600 | 4,560 |
| HK1612 | 5,040 | 6440 | 7,600 | 4,560 |
| HK1616 | 7,210 | 10150 | 7,100 | 4,260 |
| HK162222 | 8,715 | 12880 | 7,100 | 4,260 |
| HK1812 | 5,390 | 7245 | 6,175 | 3,705 |
| HK1816 | 7,700 | 11480 | 6,175 | 3,705 |
| HK2020 | 10,430 | 17290 | 5,700 | 3,420 |
| HK2512 | 7,315 | 10115 | 4,750 | 2,850 |
| HK2520 | 13,230 | 21945 | 4,750 | 2,850 |
| HK2526 | 16,940 | 29925 | 4,750 | 2,850 |
| HK3012 | 8,050 | 12110 | 4,050 | 2,430 |
| HK3016 | 11,445 | 19285 | 4,050 | 2,430 |
| HK4012 | 9,310 | 16170 | 3,100 | 1,860 |
| HK5012 | 16,520 | 40040 | 2,650 | 1,590 |
| Dimensions | Basic load ratings | Fatigue | Speed ratings | Mass | ||
| Weight | Model | |||||
| d | D | Dw | Ea | Eb | ||
| mm | g | – | ||||
| 10 | 24 | 2 | 12 | 23 | 3 | AXK 1024 |
| 12 | 26 | 2 | 14 | 25 | 3 | AXK 1226 |
| 15 | 28 | 2 | 17 | 27 | 4 | AXK 1528 |
| 17 | 30 | 2 | 19 | 29 | 4 | AXK 1730 |
| 20 | 35 | 2 | 22 | 34 | 5 | AXK 2035 |
| 25 | 42 | 2 | 29 | 41 | 7 | AXK 2542 |
| 30 | 47 | 2 | 34 | 46 | 8 | AXK 3047 |
| 35 | 52 | 2 | 39 | 51 | 10 | AXK 3552 |
| 40 | 60 | 3 | 45 | 58 | 16 | AXK 4060 |
| 45 | 65 | 3 | 50 | 63 | 18 | AXK 4565 |
| 50 | 70 | 3 | 55 | 68 | 20 | AXK 5070 |
| 55 | 78 | 3 | 60 | 76 | 28 | AXK 5578 |
| 60 | 85 | 3 | 65 | 83 | 33 | AXK 6085 |
| 65 | 90 | 3 | 70 | 88 | 35 | AXK 6590 |
| 70 | 95 | 4 | 74 | 93 | 60 | AXK 7095 |
| 75 | 100 | 4 | 79 | 98 | 61 | AXK 75100 |
| 80 | 105 | 4 | 84 | 103 | 63 | AXK 80105 |
| 85 | 110 | 4 | 89 | 108 | 67 | AXK 85110 |
| 90 | 120 | 4 | 94 | 118 | 86 | AXK 90120 |
| 100 | 135 | 4 | 105 | 133 | 100 | AXK 100135 |
| 110 | 145 | 4 | 115 | 143 | 120 | AXK 110145 |
| 120 | 155 | 4 | 125 | 153 | 130 | AXK 120155 |
| 130 | 170 | 5 | 136 | 167 | 210 | AXK 130170 |
| 140 | 180 | 5 | 146 | 177 | 220 | AXK 140180 |
| 150 | 190 | 5 | 156 | 187 | 230 | AXK 150190 |
| 160 | 200 | 5 | 166 | 197 | 250 | AXK 160200 |
| dynamic | static | load limit | Reference | Limiting | Model |
| speed | speed | ||||
| C | C0 | Pu | |||
| kN | kN | r/min | – | ||
| 8,5 | 26 | 2,85 | 5 300 | 10 000 | AXK 1024 |
| 9,15 | 30 | 3,25 | 5 000 | 10 000 | AXK 1226 |
| 10,4 | 37,5 | 4,15 | 4 800 | 9 500 | AXK 1528 |
| 11 | 40,5 | 4,5 | 4 500 | 9 500 | AXK 1730 |
| 12 | 47,5 | 5,3 | 4 300 | 8 500 | AXK 2035 |
| 13,4 | 60 | 6,7 | 3 800 | 7 500 | AXK 2542 |
| 15 | 72 | 8 | 3 600 | 7 000 | AXK 3047 |
| 16,6 | 83 | 9,3 | 3 200 | 6 300 | AXK 3552 |
| 25 | 114 | 13,7 | 2 800 | 5 600 | AXK 4060 |
| 27 | 127 | 15,3 | 2 600 | 5 300 | AXK 4565 |
| 28,5 | 143 | 17 | 2 400 | 5 000 | AXK 5070 |
| 34,5 | 186 | 22,4 | 2 200 | 4 300 | AXK 5578 |
| 37,5 | 232 | 28,5 | 2 200 | 4 300 | AXK 6085 |
| 39 | 255 | 31 | 2 000 | 4 000 | AXK 6590 |
| 49 | 255 | 30,5 | 1 800 | 3 600 | AXK 7095 |
| 50 | 265 | 32 | 1 700 | 3 400 | AXK 75100 |
| 51 | 280 | 33,5 | 1 700 | 3 400 | AXK 80105 |
| 52 | 290 | 34,5 | 1 700 | 3 400 | AXK 85110 |
| 65,5 | 405 | 48 | 1 500 | 3 000 | AXK 90120 |
| 76,5 | 560 | 65,5 | 1 400 | 2 800 | AXK 100135 |
| 81,5 | 620 | 71 | 1 400 | 2 800 | AXK 110145 |
| 86,5 | 680 | 76,5 | 1 300 | 2 600 | AXK 120155 |
| 112 | 830 | 93 | 1 100 | 2 200 | AXK 130170 |
| 116 | 900 | 98,6 | 1 000 | 2 000 | AXK 140180 |
| 120 | 950 | 102 | 1 000 | 2 000 | AXK 150190 |
| 125 | 1000 | 106 | 950 | 1 900 | AXK 160200 |
|
Socket Head Cap Screws(Allen Bolts) |
|||||||||
|
Dia. |
M2 |
M2.5 |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
|
Key |
1.5mm |
2mm |
2.5mm |
3mm |
4mm |
5mm |
6mm |
8mm |
10mm |
|
Socket Countersunk Screws(CSK Bolts) |
|||||||||
|
Dia. |
M2 |
M2.5 |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
|
Key |
|
|
2mm |
2.5mm |
3mm |
4mm |
5mm |
6mm |
8mm |
|
Socket Button Head Screws(Botton Bolts) |
|||||||||
|
Dia. |
M2 |
M2.5 |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
|
Key |
|
|
2mm |
2.5mm |
3mm |
4mm |
5mm |
6mm |
8mm |
|
Socket Set Screws(Grub Bolts) |
|||||||||
|
Dia. |
M2 |
M2.5 |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
|
Key |
|
|
1.5mm |
2mm |
2.5mm |
3mm |
4mm |
5mm |
6mm |
| Series | Inner Dia(mm) ID | Outer Dia(mm) OD | Length (mm) |
| M3 | 3mm | 5mm | 9mm |
| M4 | 4mm | 6mm | 11mm |
| M5 | 5mm | 7mm | 12mm |
| M6 | 6mm | 9mm | 15mm |
| M8 | 8mm | 11mm | 18mm |
| M10 | 10mm | 13mm | 21mm |
| M12 | 12mm | 15mm | 22mm |
Square Nut Dimention
| Size | Inner Dia(mm) ID | Length (mm) | Width (mm) | Thickness (mm) |
| M3 | 3mm | 5.5mm | 5.5mm | 1.5mm |
| M4 | 4mm | 7mm | 7mm | 2mm |
| M5 | 5mm | 8mm | 8mm | 2.5mm |
| M6 | 6mm | 11mm | 11mm | 4mm |
| M8 | 8mm | 14mm | 14mm | 5mm |
| M10 | 10mm | 16mm | 16mm | 7mm |
|
NOM SIZE mm |
Inner Dia (d) Basic Tol (+) |
Outer Dia (d1) Max |
WIDTH (b) = THICKNESS(s) Basic Tol (+ or -) |
Weight per 1000 IN KGS |
||
|
3 |
3.1 |
0.3 |
5.6 |
1 |
0.1 |
0.105 |
|
4 |
4.1 |
0.3 |
7 |
1.2 |
0.1 |
0.195 |
|
5 |
5.1 |
0.3 |
8.8 |
1.6 |
0.1 |
0.370 |
|
6 |
6.1 |
0.4 |
9.9 |
1.6 |
0.1 |
0.425 |
|
8 |
8.1 |
0.4 |
12.7 |
2 |
0.1 |
1.05 |
|
10 |
10.2 |
0.5 |
16 |
2.5 |
0.15 |
1.96 |
|
12 |
12.2 |
0.5 |
18 |
2.5 |
0.15 |
2.28 |
|
14 |
14.2 |
0.5 |
21.1 |
3 |
0.2 |
3.8 |
|
16 |
16.2 |
0.8 |
24.4 |
3.5 |
0.2 |
5.94 |
|
18 |
18.2 |
0.8 |
26.4 |
3.5 |
0.2 |
6.6 |
|
20 |
20.2 |
1 |
30.6 |
4.5 |
0.2 |
12.3 |
|
22 |
22.5 |
1 |
32.9 |
4.5 |
0.2 |
13.6 |
|
24 |
24.5 |
1 |
35.9 |
5 |
0.2 |
18.1 |
|
27 |
27.5 |
1 |
38.9 |
5 |
0.2 |
20.6 |
|
30 |
30.5 |
1.2 |
44.1 |
6 |
0.2 |
32 |
|
33 |
33.5 |
1.2 |
47.2 |
6 |
0.2 |
35 |
|
36 |
36.5 |
1.2 |
52.2 |
7 |
0.25 |
52.5 |
|
39 |
39.5 |
1.2 |
55.2 |
7 |
0.25 |
56.1 |
|
42 |
42.5 |
1.2 |
60.2 |
8 |
0.25 |
80 |
|
45 |
45.5 |
1.2 |
64 |
8 |
0.25 |
85.3 |
|
48 |
49 |
1.5 |
67 |
8 |
0.25 |
90 |
India Local Shop (India Local Shop)
Gali Shahtara, Shardhanand Marg, Delhi 110006, India
Share us via
