Indian Machine ToolsCorporation

Industrial Area, Jalandhar, Punjab

• MaterialMetal
• Control OptionsLimit Control, Foot Control
• AttachmentTapping Attachment
• Number Of FlowerTapping Machine
• OperationAutomatic

• Speeds4 Speeds
• Motor0.5 Hp Electric Induction Motor
• MountingFixed On Bench
• Motor TypeSingle Phase And Three Phase
• Power SourceElectric

• Motor Speed1440rpm
• Work Table Diameter325mm
• Motor Power1Hp
• Work Table ShapesRound,Square
• Spindle Morse TaperMT-2
• Spindle MaterialAlloy Steel

• UsageIndustrial
• AutomationSemi-automatic With Limit Switch For Blind Hole Tapping
• AttachmentTapping Attachment Fitted On Motor Plate
• SuitabilityAreas Requiring Drilling And Tapping Without Opening The Job
• Control OptionsLimit Control And Foot Control

Bench drilling machine is normally used for doing lighter jobs in steel and cast iron also soft material jobs like aluminum, brass, wood, plastic etc and. It is the widest circulated machine from the house of ITCO drilling machines. Both bore of head and arm of the machine are precision machined to close tolerances and are accurately done for long life.

In Tapping Machine, tapping or threading operation is done along with drilling. This machine is most suitable in areas where operator needs to perform drilling and tapping operations without opening the job such as using a quick change chuck. The tapping attachment is fitted on the motor plate that is fixed on the machine body. The tap when completes the desired depth is reversed automatically by the limit switch. The tapping attachment has a toggle switch with options of limit control and foot control. When the tapping is done for a blind hole then we move the toggle switch upwards to ‘limit control’ and set the depth with two small stoppers fitted on the main rod. For the tapping in a though hole then you move the toggle switch to ‘foot control’ option and complete the tapping using the foot switch. Here the stoppers and limit switch is not used. The tapping operation starts by engaging the tap to the hole and the tapping tool itself takes its own movement to complete the depth of thread. So no effort is needed during the tapping cycle.