Core Bit 2" (78 mm * 420 mm), Core Bit 3" (82 mm * 420 mm), Core Bit 5" (127 mm * 420 mm), Core Bit 4" (112 mm * 1000 mm), Core Bit 5" (152 mm * 1000 mm).

Description The chemical capsule CCS - V is a high performance rapid cure spin-in chemical anchor system based on optimum measured proportions of high strength vinylester resin, hard - ener and quartz aggregate sealed in a glass capsule. It is a fast install, simple to use system requiring no special tools and provides high strength stress free anchoring in concrete and solid masonry. The system operates by spinning a chisel ended anchor stud using the required drive adaptor through the capsule using a rotary hammer drill which crushes and mixes the contents in the drill hole and initiates the curing process, the stud is left in position to fully cure and form a high strength bond which is stronger than the base material. Capsule sizes are drill hole specic from M8 to M30 diameters. The system can be used with longer than standard threaded bars combined with multiple down hole capsules, studs should be cut chisel ended and separate drive adapters are available for connection to a drilling machine.

The CM345VESF is a high performance rapid curing styrene free low odor two component chemical injection anchoring system based on a high reactivity unsaturated vinylester resin in methacrylate monomers. The side-by-side cartridge format comprises of a resin and hardening agent in separate internal compartments which are mixed to the correct proportions in the delivery nozzle when triggered using the required manual dispenser.

The chemical anchor CAS is a chisel ended anchor for use with any of our injection systems and glass capsules in masonry and concrete. On installation the stud becomes chemically bonded to the base material. Notably the xing method imposes no expansion stress on the base material, and is ideal for shock or vibratory loading and for softer or low density building materials where expansion stresses would normally result in failure. The method also gives exceptional performance for close centre and close to edge xing. The nut may be removed and replaced without aecting the anchorage. The chemical anchor CAS is supplied complete with high tensile hex nut and plain washer in addition to one external hex drive adapter in each box.

Core Bit 2" (78 mm * 420 mm), Core Bit 3" (82 mm * 420 mm), Core Bit 5" (127 mm * 420 mm), Core Bit 4" (112 mm * 1000 mm), Core Bit 5" (152 mm * 1000 mm).

The CM345VESF is a high performance rapid curing styrene free low odor two component chemical injection anchoring system based on a high reactivity unsaturated vinylester resin in methacrylate monomers. The side-by-side cartridge format comprises of a resin and hardening agent in separate internal compartments which are mixed to the correct proportions in the delivery nozzle when triggered using the required manual dispenser.

Description The chemical capsule CCS - V is a high performance rapid cure spin-in chemical anchor system based on optimum measured proportions of high strength vinylester resin, hard - ener and quartz aggregate sealed in a glass capsule. It is a fast install, simple to use system requiring no special tools and provides high strength stress free anchoring in concrete and solid masonry. The system operates by spinning a chisel ended anchor stud using the required drive adaptor through the capsule using a rotary hammer drill which crushes and mixes the contents in the drill hole and initiates the curing process, the stud is left in position to fully cure and form a high strength bond which is stronger than the base material. Capsule sizes are drill hole specic from M8 to M30 diameters. The system can be used with longer than standard threaded bars combined with multiple down hole capsules, studs should be cut chisel ended and separate drive adapters are available for connection to a drilling machine.

The chemical anchor CAS is a chisel ended anchor for use with any of our injection systems and glass capsules in masonry and concrete. On installation the stud becomes chemically bonded to the base material. Notably the xing method imposes no expansion stress on the base material, and is ideal for shock or vibratory loading and for softer or low density building materials where expansion stresses would normally result in failure. The method also gives exceptional performance for close centre and close to edge xing. The nut may be removed and replaced without aecting the anchorage. The chemical anchor CAS is supplied complete with high tensile hex nut and plain washer in addition to one external hex drive adapter in each box.