We offer cement plant. Vrrk:- latest technology in mini cement plant :- capacity ( 30 tpd to 600 tpd ) raw materials :

1.limestone (purity not less than 88% total carbonate)
2.clay ( black soil ) should be buttery
3.coke breeze petro coke
4.laterite ( used if clay do not have 16% fe2o3)
5.gypsum (additive used during clinker grinding) :

1. Raw mill section :
all the raw materials should be of less than 25 mm size. If the size of the raw material is bigger than 25 mm, it has to be crushed through a crusher and hammer mill. All the materials are crushed stored in the storage yards through belt conveyors.

Now, the raw materials are taken as per their required percentage with the help of a weigh belts( control by plc ).the measured materials is went to feed belt conveyor and after that shifted to a feed hopper through elevator .the feed of material is controlled with the help if ratchet feedertable feeder.

2. Kiln section :
from surge silo the mixed raw materials are taken to nodulizer with the help of a screw conveyor.then water is sprayed on the mix (10%) to make nodules with the help of nodulizer. These nodules are fed into the kiln through feed chute for burning and fusion. The temperature goes up to 1350oc in the burning zone. The material travels very slowly in the kiln. All the material get fused here. After passing through the burning zone the material starts cooling slowly. The clinkerisation starts and the clinker finally comes out of the kiln.

3. Clinker grinding section :
the clinker so obtained is crushed to make its size less than 25 mm. The crushersroller crusher are used to crush the clinker. The gypsum is used as an additive. Both material crushed together and went into feed hoppers through elevator. They are collected through the feeders provided below the feed hoppers. The clinker and gypsum are mixed in certain ratios (5%). So, the weigh belt is used to weigh the ingredients for mixing. A modern electronic weighing & control system .

We are offering pneumatic conveying system :
owing to the expertise of our professionals, we have been able to manufacture and supply excellent quality pneumatic conveying system. This conveyor system is widely used in varied industries like shipping, chemicals, etc for transportation of material. Offered conveyor system is precisely manufactured in sync with set quality norms using supreme quality raw material and advanced technology. Our clients can avail this system from us in numerous specifications at affordable price.
features:

excellent performance
rigid construction
high efficiency
low maintenance

application area:

food industry (sugar, milk powders, starch, sugar, whey etc.)
petrochemical (pvc, lldpe, hdp and allied resin granules and powders)
pharmaceutical industry (solution for all pharmaceutical powders)
chemical industry (caustic soda, potash, dyes, speciality chemicals, soap ingredients)
power industry (coal, biomass, bagass etc.)
pvc cable industry ( pvc, cac03 etc.)
steel industry (iron oxide etc.)
irrigation (all rm for pvc pipe manufacturing)
plastic compound users
ceramic industry
wood industry and several other allied industries

We are offering coal handling plants
we offers dependable solution in coal handling plants. Our coal handling plants are designed to work in all types of industry like power, steel, cements, textiles, chemicals, foods, edible oils, rice plant, sugar, agriculture chemicals, resins, and many others industry . Our coal handling plants consist of feed hoppers, rack & pinion gates, flap gates, electromagnetic electromechanical vibro feeds , feed belt conveyors, magnetic separators, metal detector , vibrating screens, crusher, recycle bucket elevators recycle belt conveyors, products bucket elevators, product belt conveyors, shuttle conveyors , drag chain conveyors, stacker & reclaimer , storage bunkers etc.
designed at our end under the guidance of experienced engineers, these coal handling plants are ensured for their consistent functioning and that too for a longer period of time. All the basic equipment like crushers, screens and feeders etc are manufactured by us in house, resulting in assurance of best performance of complete coal handling plant. We are a reliable manufacturer, exporter and supplier of coal handling plant in india.

Attributes :
hassle free serviceability
longer functional life
minimal maintenance

capacity : 1 tph to 500 tph. Please send your coal handling plant enquiry to us . We will send our techno-commercial offer with conveyor layout drawing at the earliest to yous . We supplied coal handling plant in india & all over the world as per requirements.

Our Bucket Elevators can carry light to heavy bulk materials vertically. Bucket Elevators are one of the most popular systems in use today for elevating bulk materials. our Bucket Elevators typically consist of buckets, a belt that carries the buckets and accessories for loading the buckets and picking up the materials vertically to a defined distance
Our Belt type elevators are available with fabric as well as steel cord belt. Chain type of elevators are designed in centrifugal continuous and positive discharge depending upon the type of material being handled. Either straight link type chain or round link chain is being used as best suited for the desired application.
Product Details:
Material : MS
Load Capacity : 2TPH TO 500TPH
Speed Range: 45 RPM TO 100 RPM
Bucket Speed 1.4 ms
This range of Bucket Elevator which we offer is available in various constructions such as centrifugal discharge, gravity discharge, spaced buckets, continuous buckets, belting or carbon steel chain, single or double legs construction. Made of high graded materials, these are facilitated with screw take-up, self-cleaning bottom pulley, crown design head pulley, rubber legged, sturdy casing and much more.

we offer centrifugal fans :

double inlet double width (didw):(generally for higher volume):
we manufacture a wide range of didw centrifugal fans. each fan is carefully designed to suit
- specific duty conditions.any capacity or pressure requirement can be met by the right choice of fan size, speed, and impeller type.
- compact design to save floor space
- efficiency up to 88%
- limit load characteristics
- wide range of capacities up to 5, 00, 000 cu.mhr.
- belt drive arrangement for right choice of speed
- easy to assemble and install

single inlet single width (sisw):
we manufacture a wide range of sisw centrifugal fans. each fan is carefully designed to suit specific duty conditions. any capacity or pressure requirement can be met by the right choice of fan size, speed, and impeller type.
- compact design to save floor space
- efficiency up to 88%
- limit load characteristics
- wide range of capacities up to 3, 60, 000 cu.mhr.
- belt drive arrangement for right choice of speed
- direct drive, coupled drive and variable frequency drive options available
- easy to assemble and install
- wheels dynamically balanced

offered in standard or custom built, these fans address the needs of following industrial applications:
cement
power
fertilizers
chemical
pharmaceutical
petrochemical
dust extraction
air pollution control
mining
dairy & food product
steel plants incineration
fire gas handling
ventilation

We manufacture high quality robust vibrating screens that are widely used for meeting the grading and sieving application requirements. These are also available in customized specifications as per the specifications of the clients. Being highly reliable and durable these have a wide demand. It possesses high screening capacity and are available in single, double and three deck design.our vibrating screen are very much used in coal handling system, husk handling system, iron ore , mineral, steel plant, pet coke handling system,

We offer dust collectors .
We are among the most relied manufacturers and suppliers of dust collectors in india. Our immense spectrum of product includes dust collectors, industrial fans, boiler id fans, fd fans, id fans, cartridge filter dust collectors, bag filter dust collectors, industrial axial fans, etc. The quality and consistency of our dust collectors have been proven all around suitable for high temperature ( upto 450 c ) dust and all types of fumes ( corrosive)

we have been working with a vision to expand our wings by hitting the export market with world class dust collectors and have been continuously marching towards it with quality and consistency of our dust collectors. We have established several landmarks in the field of manufacturing best quality dust collectors. These dust collectors are manufactured using quality materials and latest technology. Our dust collectors are used for the collection of critical dust and also applicable for material classification or pollution control.

We are known for offering a world class dust collector. We are manufacturing variety of dust collector as per the specifications given by our customers. Our dust collectors offer very high performance and are fault resistant.
Dust collector specifications:

model dca-2x11 dcb-2x12 dcc-2x13 dcd-2x14 dce-2x15
treatment wind capacity (m3h) 488000
732000 532000
798000 577000
865000 621000
931000 665000
1000000
filtering area (square meters) 10208 12064 12064 12992 13920
filter bag quantity (pcs)
diameter 130x6000mm 3388 4004 4004 4312 4620
filtration velocity (mmin) 0.8-1.2
resistance (pa) less than 1500
entrance dust content (gn m3 ) less than 1000
exit emission concentration (mg n m3 ) less than 50
negative pressure sustained by dust collector (pa) 8000
dust cleaning pressure pressure (mpa) 0.2-0.6 ( diameter 3 inch flood pulse valve used)

compressed air gas consumption (m3min) 5 5 5.5 6

Ductile Iron manhole covers & Frames, Ductile iron Flanges, Valves, Ductile iron casting for engineering components .
We are pleased to introduce our company as a manufacturer and exporter of wide range of ductile iron valves, ductile iron flanges and various pipe fittings in various ductile iron material grades, as per BS standard as well as Indian standard, and as per buyer's requirements.
Our wide range of ductile iron flanges includes the sizes such as DN50 to DN1800 in various types such as PN10, PN16, PN25, & PN40 etc. etc.
Our wide range of ductile iron valves includes various such as Knife Gate Valves, Butterfly Valves, Sluice Valves, various different valves etc.
We have an ISO 9001:2000, ISO 14001 & ISO 18001 Certified Foundry Unit for Ductile Iron & Steel Foundry, manufacturing and supplying quality Grade Ductile Casting for all Industrial Casting, Engineering Components, Valve Industry, Pump Industry, Machine Tools Industry, Railways, Defense, Sugar Mill & Paper Mill Industries, Electric Motor-Body Parts Casting, Automobiles Industry Casting, SG Casting, Alloy Cast Iron Casting, etc to India's & Overseas leading Industries for various casting application.

We produces 15, 000 tones of castings per year. We offers wide range of casting of weight 0.5 Kg. to 2 Tonnes. We supplies Ductile Iron Casting Manhole Cover, Manhole Cover with Frames, Channel Gratings, Drainage Cover, Gully Gates, Cantilever Brackets, Cast Iron Casting, Grey Iron Manhole Cover in India . We produce and supply high quality Ductile Iron Casting, Alloy Cast Iron Castings as per Indian & International standards or customers requirements.

Salient Features of Our Sugar Plants

Highly reliable
Require less maintenance
Fully automatic plant from sugar cane unloading to sugar bagging house
Crystal white sugar production through sulphitationcarbonation process
Equipped with both air pollution control as well as water pollution control equipment








List of sugar mill machinery manufactured by us
Mill House & Power House
Mill House E.O.T. Crane & Gantry
Cane Unloaders, Table Feeders
Cane Cutters, Cane Levellers & Kickers
Cane Carriers, Intercarriers with Chains, Slats. Bagasse Elevators complete
Headstocks, Crown Pinions, Scrappers, Trash Plates, Coupling
Bagasse Baling Presses
All Types of Chains, Slats. Rakes, Sprockets
Power House Crane & Gantry

Boiling House; Clarification House; Bagging House And Centrifugal Accessories
Complete Boiling House Equipment upto 10, 000 Tons Per Day Crushing Capacity such as;
Automatic Juice Weighing Scales. Water Weighing Scale. Molasses Weighing Scales
Juice Heaters - Conventional & Dynamics
Semi - Kestners. Falling Film Evaporators. Evaporator bodies, quad set
Juice Sulphitation Unit, Milk of Lime Station, Carbonation Tanks
Lime Kilns
Sulphur Burners - Conventional and Digital
Fabricated Right Angle Valves & Double Beat Valves
Clarifiers & Filters
Calendria Vacuum Pans, Continuous Pans for A, B & C Massectiites
Barometric Condensers, Multijet Condensers
Crystallizers -Air Cooled, Water Cooled, Seed & Vacuum. Vertical Crystallizers
Automation of Pans, P.H. Control, Sulphur Burner, Molasses Conditioners etc.
Screw Conveyors.
Sugar Melter - Horizontal & Vertical, Magma Mixers
Sugar Elevators, Sugar Graders, Hoppers
Molasses Storage Tanks, Spray pond
Complete Plant Staging and Process Piping. Misc. Tanks

Boilers
Staging & Ducting, M.S. Chimney
Return Bagasse Carrier with Chain, Slats etc.
IBR Pipe Line

Working in close coordination with the genuine logisticians, we dispatch the products in the dedicated time. The offered lot is precisely manufactured using superior grade material and in conformity with the industry standards.

Keeping in compliance with the international quality standards, the raw material used to manufacture the product is of high quality due to which we are capable of delivering only quality products. We are backed by a well-structured and capacious storage unit wherein we store the entire lot in a secured manner. Moreover, we ensure complete security of the stored items.

We offer dust collector and cyclone separator :
we are a leading manufacturer & exporter of dust collector and cyclone separator such as dust collector, cyclone separator, dust extraction system, dust collecting equipment, portable dust collector, cartridge dust collector and many more items from india.

Dust is a major industrial pollutant generated by variety of manufacturing process.
We delivers cartridge type dust collectors with automatic cartridge cleaning by compressed air pulses. Our cartridge dust collectors serve the best when it comes to dry separation of dust across different industries
advantages:
- suitable for light to heavy volumes of dust application
- compatible with central and state pollution control board norms
- less floor space & overhead room requirement
- lower operation costs (compared to bag house filters)
- lower maintenance costs (compared to bag house filters)
- indoor or outdoor installation
our product advantage:
we have a database of dust behavior for more than 600 different types of dust. The dust collection project is executed in a phase wise manner inclusive of following phases of execution

- analysis of dust generating points sources
- optimum design of hoods
- ducting layout as per good engineering practices
- crude air passage design for minimal dust load on cartridges
- submission of exact compressed air requirement calculations
- database and experience to select correct filter media
- food grade, explosion proof versions available on request

applications:
- plastic producers and users
- food & pharmaceutical
- cement
- chemical & pigment
- ceramic industries
- foundries
- rubber & allied industries
- laminate wood working industries
- mining & minerals
- pneumatic conveying of solids
- building materials

We offer dust collector and cyclone separator :
we are a leading manufacturer & exporter of dust collector and cyclone separator such as dust collector, cyclone separator, dust extraction system, dust collecting equipment, portable dust collector, cartridge dust collector and many more items from india.

Dust is a major industrial pollutant generated by variety of manufacturing process.
We delivers cartridge type dust collectors with automatic cartridge cleaning by compressed air pulses. Our cartridge dust collectors serve the best when it comes to dry separation of dust across different industries
advantages:
- suitable for light to heavy volumes of dust application
- compatible with central and state pollution control board norms
- less floor space & overhead room requirement
- lower operation costs (compared to bag house filters)
- lower maintenance costs (compared to bag house filters)
- indoor or outdoor installation
our product advantage:
we have a database of dust behavior for more than 600 different types of dust. The dust collection project is executed in a phase wise manner inclusive of following phases of execution

- analysis of dust generating points sources
- optimum design of hoods
- ducting layout as per good engineering practices
- crude air passage design for minimal dust load on cartridges
- submission of exact compressed air requirement calculations
- database and experience to select correct filter media
- food grade, explosion proof versions available on request

applications:
- plastic producers and users
- food & pharmaceutical
- cement
- chemical & pigment
- ceramic industries
- foundries
- rubber & allied industries
- laminate wood working industries
- mining & minerals
- pneumatic conveying of solids
- building materials

Manufacturing all types of conveyors, hoppers, vibrating screen, buckets elevators, coal crushers , for the bulk material handling systems