Mica ProductsMica products are provide protection against high temperature and isolation. Mica products are widely use in Induction Furnace assembly likeMica Pad are mostly use to protect and isolate Magnetic shunt from Induction Melting coil.Mica Flange are use to isolate Tie Rods from refractory castable blocks.Mica Tube and Washer are use at various bolt nut joint for isolation purpose. Mica sandwich is the sandwich of particular 3 insulating materials together bound with FEVx CompoundMica SheetAsbestos SheetNomex paper

Overhead crane, c.t, l.t, hoist. Capacity upto 50 tonnes. manufacturing and repair of over head cranes. heavy fabrication works : boiler casings, pipe lines for oil companies etc.

Leveraging on our rich industry experience and strong tie-ups, we are capable in bringing forth top-notch quality Water Cooled Cables & Busbars. Offered by us in a gamut of specifications, our Water Cooled Cables & Busbars are the preferred choice amongst the buyers. The Water Cooled Busbars are comprehensively used in induction heating applications. We have the ability to take up even the bulk order of them and deliver them well in time.

 

Advantages :

• High Flexibility
• Low Impedance, Low Energy Loss
• Excellent Durability
• Easy Maintenance

We are a renowned name as Manufacturer, Exporter, and Supplier of Carbon Free Hose Pipes in India. The Hose Pipes, we bring forth, are manufactured with the use of high-grade stainless steel bands, compact cable hoses, copper rope, protection bumpers, etc. as per the industry set quality standards. They are used in a number of industries and are highly demanded owing to their superior performance, heat resistant quality, and excellent finish. To entertain the varied piping needs of buyers, these Carbon Free Hose Pipes are made available in different specifications.

 

Specifications :

• Hose is made up of water resisting & water proof rubber.
• Surfaces at both the ends of Hose are finished flat, while remaining surface is finished corrugated.
• The flat finished surfaces relieve the repeated bending stress applied to the conductor end.
• On the surface of Hose, water proof material is adhered during the vulcanization process.
• Stainless Steel clamps will be used to clamp the Hose Pipes.

 

Sizes with Variable lengths :

• 1",   1-1/4",   1-1/2",   2",
• 2-1/4",   2-1/2",   3",   4"

We have a strong foothold as a known Manufacturer, Exporter and Supplier of Electrical Insulation Coil Coatings from India. We have a team of experienced and skilled personnel who makes use of sophisticated machines and latest techniques for their production. The Electrical Insulation Coil Coatings are made in line with the stated industry norms. Perfectly coated, our Electrical Insulation Coil Coatings are pocket-friendly! Rely on us.

 

Details :

• Feature : Advantage:Benefit Clear, Fast Air Dry, black type available

• Type : Alkyd,   Reducer, monomer Xylene

• %NVM : 37:40

• Flash Point (°C) : 15

• Viscosity @25°C : 150:300
• Cure Cycle Time (H) : 30:60min

• Temp.(°C) : 60:120

• Dielectric Strength (volts/mil) : Dry 3141 : Wet 2607

We are one of the trustworthy Manufacturers, Exporters & Suppliers of Change Over Switch For Induction Furnace from India. The C.O. Switch For Induction Furnace that we deal in is enclosed in steel sheet with excellent power coating. Our Change Over Switch For Induction Furnace comes with coil pot switching and capacitor assembly switching. Our performance oriented Switches can be acquired at the modest prices

We have carved a niche for ourselves as a prominent Manufacturer, Exporter and Supplier of Stainless Steel Round Tubes from India. The Round Tubes are produced by our team of professionals using non-corrosive and durable stainless steel. In order to meet varied requirements of the buyers, we offer Stainless Steel Round Tubes in different specifications. Our Tubes can be acquired in bulk orders and at nominal prices!

Details :

• Non-Magnetic Grade 304 & 316 (Marine Grade)
• I.D & O.D : As per required
• Continuous wound coil
• 'S' Shaped Coil

The company is engaged in making available superior quality Mica Products to all the buyers from all round the globe. We are a Manufacturer, Exporter and Supplier of Mica Products from India. The Mica Sandwich Lamination Yoke Padding that we deal in is impeccable on counts of construction and performance. We mainly deal in offering Ring Mica, Mica Tubes & Washers and Silicon Bonded Mica - Coil Spacers (biscuits).

We are the experts to rely on for any kind of Fabrication & Installation Services. We efficiently handle complex tasks such as fabrication, Rectification and installation of furnaces & overhead cranes. We have a team of engineers and technicians to fabricate Induction Furnace Structure & Cradle. We undertake Fabrication & Modification Jobs for heavy-duty furnaces with weight ranging from 1 ton to 40 tons. We can also fabricate almost all types of Overhead Cranes weighing from 1 ton to 100 tons. Assign the job to us, and rest assured for high level of professionalism!

Our Overhead Cranes Fabrication Services Include :

• Complete Fabrication
• Complete Rectification

Contact us to purchase precision-engineered Castable Refractory and Ramming. We are counted amid the dependable Manufacturers, Exporters & Suppliers Castable Refractories And Rammings. We are known for providing premium Castable Refractory and Ramming that conform to the industry set norms and standards. Furthermore, our Castable Refractory and Ramming are tested on various parameters for ensuring precision, strength, endurance and longevity. As a result, clients repeatedly place orders for our Castable Refractory and Ramming.

Details :

• Refractories are heat-resistant materials that constitute the linings for high-temperature furnaces and reactors and other processing units. In addition to being resistant to thermal stress and other physical phenomena induced by heat, refractories must also withstand physical wear and corrosion by chemical agents. Refractories are more heat resistant than metals and are required for heating applications above 1000°F (538°C).
• While this definition correctly identifies the fundamental characteristics of refractories--their ability to provide containment of substances at high temperature--refractories comprise a broad class of materials having the above characteristics to varying degrees, for varying periods of time, and under varying conditions of use. There is a wide variety of refractory compositions fabricated in a vast variety of shapes and forms, which have been adapted to a broad range of applications.

 

Specifications :

• Melting point of some pure compounds used to Manufacture refractory
• Compounds Melting point ()
• MgO (pure sintered) 2800
• CaO(limit) 2571
• SiC pure 2248
• MgO (90-95%) 2193
• Cr2O3 2138
• Al2O3(pure sintered) 2050
• Fireclay 1871
• SiO2 1715
• Kaolin (Al2O3SiO2) 1816
• Chromite (FeOCr2O3) 2182

We are actively engaged in bringing to you all a quality assured range of High Density (Synthanio) & Low Density Asbestos. The High and Low Density Asbestos Products are offered by us in different thicknesses in order to meet diverse requirements of the buyers. Non-corrosive in nature having inclined durability, our Asbestos Products are extensively in demand. Place small order or bulk, we make sure that the desired order is timely delivered.

 

Details :

• Sheets : 1000 x 1200    'mm'
• Coil Spacers synthanio biscuits
• Thickness : 6, 8, 10, 12, 16, 20, 25, 32, 40  'mm'
• Synthanio Insulation fittings

It is all about quality and so we never ever sacrifice it! We are a counted amidst the top most Manufacturers, Exporters and Suppliers of Water Softeners, DM Water Units & Heat Exchangers in India. Designed and fabricated using quality checked metal, our Water Softeners, DM Water Units & Heat Exchangers comply with each norm of the industry. You all can get them from us at the most acceptable prices.

 

Importance of Water Softners & D.M Water Plants :

• Hardness in water causes scale build up in pipes and equipment
• Hardness will reduce the efficiency of any boiler or heat exchanger
• Cooling towers, washers, fixtures, sinks and other surfaces in
• contact with hard water will require more frequent maintenance, and
• will have a much shorter useful life.

• Water softening methods mainly rely on the removal of Ca2+ and Mg2+ from a solution or the sequestration of these ions, i.ebinding them to a molecule that removes their ability to form scale or interfere with soapsRemoval is achieved by ion exchange and by precipitation methods.
• Mineral tank and the brine tank are the main constituents of the water softening systemThe water softening system consists of a mineral tank and a brine tankThe mineral tank and the water supply pipe is connected due to which water passes through the tank before it can be usedMineral tank consist of negatively charged beads or resins that attracts positively charged calcium and magnesium.

• The surface of the resin gets coated with the calcium and magnesium mineralsThe resin is cleared by flushing a strong sodium (salt) solution held in the brine tankThe sodium ions are powerful and they easily overpower the calcium and magnesium ions and drives them off of the resins which is later drained out of the unit.

Located in India, we are actively functioning as a reliable Manufacturer, Exporter and Supplier of Coil Support FRP all over the nation and overseas. The Coil Support FRP that we bring forth is fiber reinforced polymer for coil support. We are engaged in offering it in all dimensions as required. Coil Support FRP comes with a Fibre Glass Tape. We offer it to all our worthy buyers at the cost-effective prices.

All of you can contact us for acquiring top quality Silver Plated Copper Connecting Plates! We are a top-notch Manufacturer, Exporter and Supplier of Connection Copper Plates. The Copper Plates are fabricated in accordance with the laid international quality standards. In order to lift up their performance, the Plates re designed using quality checked copper. Order retail or bulk, timely and safe deliveries are assured.

Are you looking for a firm offering reliable Maintenance-Modification of Induction Melting Furnace services? If the answer is a yes then we are the right option for you to opt for! We are here at your assistance to modify furnace having capacity range up to 40 tons. We have a team of professionals who have years of experience in modifying and maintaining the Induction Melting Furnace. In addition to all this, the Furnaces are also available on rent! All the clients can obtain our services at the cost-effective prices.

Are you looking out for the finest quality Copper Coils of Rectangular Sections? If yes, hurry up and drop a line to us! We are a Manufacturer, Exporter and Supplier of Copper Coils of Rectangular Sections from India. Accurate dimensions, perfect shape, non-corrosive nature and longer service life are the highlights of our product. As far as the cost is concerned, they are offered at the most reasonable rates!

Details :

• Section profile : A x B x C "mm"
• Electrolytic Grade Copper (ETP)
• I.D & O.D : As per requiredContinuous wound coil
• 'S' Shaped Coil

Deeply ingrained in Ahmednagar(India), we have marked our presence in the industry by offering world-class products at the best prices. Reckoned for our excellent customer care support, we have become preeminent suppliers of Carbon Free Hoses in the industry.

The Lamination Yokes that we deal in are comprehensively demanded owing to their superior performance, accurate dimensions, compact design, durability and longer service life. We are a well-known Manufacturer, Exporter and Supplier of Lamination Yokes from India. It is our prime responsibility to deliver even the bulk orders of Yokes on time. Don’t worry about the prices as our Lamination Yokes are obtainable at the modest prices!

CRNGO lamination strips stacked with copper cooling tubes :

• Copper cooling for connection side
• S Cooling for Non connection side
• 2-way cooling
• 3-way cooling
• 4-way cooling

 

Re-Coating Ferrosilicon

• The main problem with core (lamination yoke) is, its hysteresis loss and eddy current loss in Induction Furnace.
• Hysteresis loss mainly depends upon its core materials. It is found that, a small quantity of silicon alloyed with low carbon content steel produces material for making core, which has low hysteresis loss and high permeability.

 
Advantages of Silicon Coated Lamination Yoke

• Higher reliability providing better magnetic field path.
• Reduction in power consumption of induction coil.
• Lower unit consumption per ton.
• Lower resistance to oxidation of the lamination yoke.

CRGO Laminations for TransformersCold Rolled Grain Oriented (CRGO) silicon steels are used for laminations of the Power Transformers. Cold Rolled Grain Oriented (CRGO) sheets will have superior magnetic properties in the direction of rolling. The crystals are aligned in the direction by cold rolling followed by heat treatment process. Magnetic properties of the CRGO steel Sheets are dependent on the magnetic properties of the individual crystals of the material and the direction of orientation of the crystal. The properties of the CRGO silicon steels are improved by composition, manufacturing process, heat treatment, laser irradiation etc.Thickness of the CRGO sheets will be of the order of 0.33mm to 0.25mm. These CRGO Steel Laminations are stacked together to form a magnetic core for the Transformer.The Commercially available CRGO steel sheets will have 3% of Silicon. Higher the Silicon content increases the resistivity and reduces the eddy current losses. But Silicon Content above 3.5% makes the CRGO silicon steel sheets brittle. Silicon content of 3% to 3.25% is used in commercial grades of CRGO steel.

It is all about quality and so we never ever sacrifice it! We are a counted amidst the top most Manufacturers, Exporters and Suppliers of Water Softeners, DM Water Units & Heat Exchangers in India. Designed and fabricated using quality checked metal, our Water Softeners, DM Water Units & Heat Exchangers comply with each norm of the industry. You all can get them from us at the most acceptable prices.

Importance of Water Softners & D.M Water Plants :

• Hardness in water causes scale build up in pipes and equipment
• Hardness will reduce the efficiency of any boiler or heat exchanger
• Cooling towers, washers, fixtures, sinks and other surfaces in
• contact with hard water will require more frequent maintenance, and
• will have a much shorter useful life.
• • Water softening methods mainly rely on the removal of Ca2+ and Mg2+ from a solution or the sequestration of these ions, i.ebinding them to a molecule that removes their ability to form scale or interfere with soapsRemoval is achieved by ion exchange and by precipitation methods.
  • Mineral tank and the brine tank are the main constituents of the water softening systemThe water softening system consists of a mineral tank and a brine tankThe mineral tank and the water supply pipe is connected due to which water passes through the tank before it can be usedMineral tank consist of negatively charged beads or resins that attracts positively charged calcium and magnesium.
  • • The surface of the resin gets coated with the calcium and magnesium mineralsThe resin is cleared by flushing a strong sodium (salt) solution held in the brine tankThe sodium ions are powerful and they easily overpower the calcium and magnesium ions and drives them off of the resins which is later drained out of the unit.