Industrial Agencies

Kolhapur, Maharashtra

• Offset Centerline Calipers specially designed for center to center distance measurements on the same and offset planes.
• Hole diameter should be larger than 1.5mm (.06") but smaller than 10mm (.4").
• Can also measure from edge to center.
• Without Depth Bar.

Mitutoyo's new ABS Digimatic Caliper "MYCAL Absolute" keeps track of its origin point once set. No more repeated zero setting is necessary with the "MYCAL Absolute" as well as no more care for the over - speed error. Whenever turned on, the large LCD screen displays the actual slider position ready to start measurement.

• ABS Digimatic Calipers display zero setting at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute mode and display of the true position from the origin point.
• It have large and clear LCD screen.
• Optional add-on DATA /HOLD Unit is available.
• Single SR44 battery operation with approx. 3.5 years battery life under normal working conditions.

• Provided with a fine - adjustment carriage to feed the slider finely.
• Provided with a fine - adjustment carriage to feed the slider finely.Permitting four types of different measurement (internal, external, depth and step).

• The main and vernier scales are flush-fitted to eliminate parallax errors because of the diamond-shaped (octagonal) cross section of the main scale.
• With clamping screw below the slider.
• Permitting four types of different measurement (internal, external, depth and step).

• Neck Type Calipers can measure wall thickness inside bores and recesses.
• Digital readout to 0.01mm on the large and clear LCD screen for error-free reading.
• With SPC data output.

• The main scale jaws is a round bar that facilitates measurements of tube wall thickness.
• Digital readout to 0.01mm on the large and clear LCD screen for error-free reading.
• With SPC data output.

• Specially designed for inside measurements in hard to reach places.
• With SPC data output.
• Digital readout to 0.01mm on the large and clear LCD screen for error-free reading.

• Permitting four types of different measurement (internal, external, depth and step).
• Slider displacements are amplified by a rack - and - pinion mechanism and indicated on the dial.
• Carbide Jaw Dial Calipers are also available.
• With clamping screw atop the slider.

• Due to the low measuring force these calipers are ideal for elastic or resilient work pieces such as plastic parts and rubber parts that standard calipers can not measures.