Our Products
Thanks to our modern transit facility, that ensures safe delivery of the orders at required destinations. The packaging commences strictly under the guidance of veteran experts and professionals, thus ensuring optimum packaging, keeping the products safe from various damaging factors.
Head Trimming Machine is to make the Head of Bolt hexagon or square as per requirement. The bolt head trimming and shank reducing Machine is fully automatic and easy to operate. Bolt head trimming and shank reducing machinery is made to fulfill various requirements with Bolts by the customers.
Pipe Beveling Machine is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End.
Industrial Machinery Corporation is manufacturing and offering Scaffolding Pipe Threading Machine used for Construction Scaffolding material. The scaffolding pipe can be thread by Thread Cutting or Thread Rolling Process. Hydraulic Scaffolding Thread Rolling Machines are used for high production and long threads and Scaffolding Thread Cutting Machines are used for low production and can thread upto 650mm only. For long thread and high production we recommend you to Thread with Rolling process.
Cups and lock pins Tagging Machine is Designed to increase the Production and for proper placement of Cups and Pins as per Standard. This unit helps in Aligning the Position of Cups to equal distance as 500mm.
This unit is pneumatically operated for clamping and de- clamping of vertical Cuplock , we suggest making one tag on each cup and final welding on lock pins , Once Job shifted to Final Welding Machine, the job will be directly shifted to Painting section.
Pipe cutting machine removes material from pipe or tube to create the desired profile. Typical profiles include straight cuts, mitres, saddles and midsection holes. These complex cuts are usually required to allow a tight fit between two parts that are to be joined via arc welding.
HYDRAULIC HACKSAW MACHINE
This is a motorized modelHydraulic Hacksaw Machine. It is equipped with feed control device, automatic lifting and lowering arrangement of saw frame with mechanical coolant pump, vice and machine belt guard.
Hydraulic Hacksaw Machineis supplied complete with suitable HP AC Electric motor, on-off Starter and V belts. The machine is available in different capacities from 175 mm round bar upto 600 mm round bar cutting capacity. The higher capacity machines are supplied with double cylinder Hydraulic system.
V belt drive with two speeds by step pulleyHydraulic relief to saw blade on non-cutting strokeAutomatic lifting of saw blade after cutting action
Standard Accessories
Wheel Balancing Stand
Specifications: | ||||||
MODEL | HHM – 175 | CGM – 250 | CGM – 300 | CGM – 400 | CGM – 500 | CGM – 600 |
Capacity – round bar up to (mm) | 175 | 250 | 300 | 400 | 500 | 600 |
Capacity – square bar up to (mm) | 150 | 200 | 250 | 325 | 400 | 500 |
Stroke (mm): | 140 | 140 | 140 | 140 | 150 | 150 |
Strokes per minute | 100 & 120 | 85 &100 | 85 & 100 | 85 & 100 | 60 & 100 | 60 & 85 |
Motor (HP) | 1 | 1.5 | 2 | 3 | 5 | 5 |
Blade Size (mm) | 365 or 406 | 406 or 457 | 457 or 508 | 559 or 610 | 710 or 762 | 813 or 906 |
Net / Gross Weight (kgs.) | 300 / 400 | 450 / 550 | 500 / 600 | 650 / 700 | 850 / 1050 | 975 / 1200 |
Dimensions (m) | 1.1 x 0.8 x 1.0 | 1.1 x 0.8 x 1.0 | 1.1 x 0.8 x 1.3 | 1.4 x 0.9 x 1.6 | 1.6 x 1.0 x 2.3 | 1.7 x 1.0 x 2.5 |
Shipping Volume (m3) | 0.88 | 0.88 | 1.14 | 2 | 3.68 | 4.25 |
imc automaticbolt trimming machineis to make the head of bolt hexagon or square as per requirement. Thebolt head trimming machineis fully automatic and easy to operate. Bolt head trimming and shank reducing machinery is made to fulfill various requirements with bolts by the customers.
Specifications: | ||||
Model No. | Length Of Bolt | Dia. Of Bolt | Production Per Minute | Power Required (H.P x RPM |
IMC-HTM-1 | 1/2″ – 1″ | 80-85 | 80 – 90 | 1 x 1440 |
IMC-CHM-2.5 | 1/2″ – 2″ | 70-75 | 60 – 80 | 3 x 1440 |
IMC-CHM-3 | 3/4″ – 3″ | 60-65 | 50 – 60 | 5 x 1440 |
IMC-CHM-4 | 1″ – 4″ | 45-50 | 40 – 45 | 7.5 x 1440 |
IMC-CHM-5 | 1.5″ – 5″ | 35-40 | 30 – 35 | 15 x 1440 |
IMC-CHM-6 | 2″ – 6″ | 25-30 | 25 – 30 | 20 x 1440 |
Electric Conduit Pipe Threading Machine is use to thread the external area of the conduit pipes. IMC Machines highly specialized and can be used solely for industry specific purposes. There are only a few companies in the world that fabricate this particular type of machine.
One company that has won much acclaim in the area ofconduit pipe threading machines.We have a large range ofthreading machines. The company has immense experience in the field of such machines.Also the same to ensure that the customers get value for the money that they are spending.
Material used for the purpose of fabrication is of high grade. There is an absolute assurance that there will be no issues during usage.
If one chooses to purchase aconduit pipe threading machinefrom a company that is reputed as the Industrial Machinery Corporation. The demand for these machines has grown manifold in the past few years.
A quality product always stands out in the market, and will always be able to create a niche for itself. This is exactly why thiselectric conduit pipe threading machine, unlike several others, has been able to satiate the requirements of numerous big organizations, by providing them efficient and relatively maintenance free service.
Model | 1/4″ to 1″ | 3/8″ to 1.1/2″ | 1/2″ to 2.1/2″ |
Saddle Movement | 10″ | 10″ – 12″ | 12″ – 16″ |
Spindle Speed Range | 60-90 | 60-90 | 60-90-120 |
Number of Spindle Speed | 2 | 2 | 3 |
Threading Capacity | 1/4″ to 1″ | 3/8″ to 1.1/2″ | 1/2″ to 2.1/2″ |
Production per Hour | 60-80 | 60-80 | 70-90 |
H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. |
Lead Screw | Provided | Provided | Provided |
Weight (KG) Approx. | 500 | 550 | 990 |
We are offering Wire Straightening Machine
WIRE STRAIGHTENING AND CUTTING MACHINE | |||||
Specifications : | IMC-ST-7 | IMC-ST-8 | IMC-ST-10 | IMC-ST-12 | IMC-ST-13 |
In Thickness of wire | 2 to 7mm | 3 to 8mm | 4 to 10mm | 4 to 12mm | 3 to 13mm |
In Length of wire to be cut automatically | As per Requirement | As per Requirement | As per Requirement | As per Requirement | As per Requirement |
Feeding capacity per min. | 70′ feet | 70′ feet | 70′ feet | 60′ feet | 60′ feet |
Power of motor H.P. | 3 H.P. | 5 H.P. | 5 H.P. | 10 H.P. | 10 H.P. |
Required R.P.M. | 1440 | 1440 | 1440 | 1440 | 1440 |
Approx. Weight in Kg. | 410 | 460 | 550 | 1000 | 1200 |
Floor space required | 42″x18″ | 48″x20″ | 52″x20″ | 60″x22″ | 82″x22″ |
Specifications : | IMC-ST-14 | IMC-ST-15 | IMC-ST-16 | IMC-ST-20 | IMC-ST-25 |
In Thickness of wire | 5 to 14mm | 6 to 15mm | 8 to 16mm | 10 to 20mm | 15 to 25mm |
In Length of wire to be cut automatically | As per Requirement | As per Requirement | As per Requirement | As per Requirement | As per Requirement |
Feeding capacity per min. | 60′ feet | 60′ feet | 60′ feet | 60′ feet | 40′ feet |
Power of motor H.P. | 10 H.P. | 15 H.P. | 15 H.P. | 25 H.P. | 30 H.P. |
Required R.P.M. | 1440 | 1440 | 1440 | 1440 | 1440 |
Approx. Weight in Kg. | 1300 | 1500 | 2500 | 3000 | 3500 |
Floor space required | 91″x22″ | 105″x24″ | 125″x24″ | 150″x27″ | 180″x36″ |
PIPE AND BOLT THREADING CHASER
We offer a wide collection ofTangential Threading chasersuch asthread cutting chaser, pipe threading chaser, bolt threading chaser and rod threading chaser. We stand amid the well known steel tangential chasers suppliers in India. We are specialized IMC threading tangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard proven imported high speed steel. These IMC Threading Tangential Chasers are designed as per international threading standard, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1 to 6depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and easily be cut on this tangential chaser.
IMC Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.
IMC Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set.
SCAFFOLDING PIPE THREAD CUTTING MACHINE
Scaffolding Pipe Threading Machine is used for Cutting External Thread on Scaffolding Pipes by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme Threads B.S.F etc. threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-
SCAFFOLDING PIPE THREADING MACHINES are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.
DESIGN & WORKMANSHIP:The Industrial Machinery Corporation thread cutting machines are designed to produce quality threads within the tolerance for which they were intended.
HEAD STOCK:A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.
THE BED:The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.
THE SADDLE:The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.
The APRON:The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. Its all gears are made of best quality steel.
VICE JAWS:The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.
Range of IMC Die Heads.1/2 to 2.1/2 do/-
Specifications Of C Type Power Press Machine:
Model | 50 Ton | 75 Ton |
Bed Size | 20″ x 30″ / 508″ x 762″ | 16″-26″/ 406 x 660 |
Bed to Ram | 13″/330 | 12″/305 |
Bed Bore | 6″ / 150 | 5″ / 127 |
Gear Dia | 26″ / 660 | 24″ / 610 |
Fly Wheel Dia | 32″ / 812 | 28″ / 710 |
Crank Shaft Dia | 4¾” / 118 | 4″ / 100 |
Back Shaft Dia | 3⅛” / 80 | 2¾” / 70 |
Stroke | 3½” / 90 | 3″ / 75 |
Hole in Ram Dia Clamping | 1½” / 38mm | 13/8″ / 35mm |
No. of Stokes | 55 | 60 |
Pully Size | 6″ | 6″ |
Total Height | 82″ | 76″ |
Motor Requirement | 5 H.P | 5 H.P |
Floor to Top of Bed | 30″ | 30″ |
Specifications Of C Type Power Press Machine:
Model | 100 Ton | 150 Ton |
Bed Size | 27″ x 37″ / 685″ x 940″ | 29″x 40″/ 735 x 1015 |
Bed to Ram | 17″/430 | 19″/480 |
Bed Bore | 8½” / 200 | 9½” / 225 |
Gear Dia | 34″ / 865 | 38″ / 965 |
Fly Wheel Dia | 39″ / 990 | 42″ / 1065 |
Crank Shaft Dia | 6½” / 106 | 7½” / 190 |
Back Shaft Dia | 4″ / 100 | 4¾” / 118 |
Stroke | 4½” / 115 | 5″ / 125 |
Hole in Ram Dia Clamping | 2″ / 50mm | 2¼” / 55mm |
No. of Stokes | 53 | 50 |
Pully Size | 7″ | 7″ |
Total Height | 94″ | 102″ |
Motor Requirement | 7½ H.P | 10 H.P |
Floor to Top of Bed | 30″ | 30″ |
Model | 100 Ton | 200 Ton |
Bed Size | 27″ x 37″ / 685″ x 940″ | 32″x 48″/ 812 x 1220 |
Bed to Ram | 17″/430 | 20″/510 |
Bed Bore | 8½” / 200 | 10½” / 265 |
Gear Dia | 34″ / 865 | 42″ / 1065 |
Fly Wheel Dia | 39″ / 990 | 48″ / 1220 |
Crank Shaft Dia | 6½” / 106 | 8¼” / 210 |
Back Shaft Dia | 4″ / 100 | 5″ / 125 |
Stroke | 4½” / 115 | 6″ / 150 |
Hole in Ram Dia Clamping | 2″ / 50mm | 2⅜” / 60mm |
No. of Stokes | 53 | 50 |
Pully Size | 7″ | 8″ |
Total Height | 94″ | 102″ |
Motor Requirement | 7½ H.P | 15 H.P |
Floor to Top of Bed | 30″ | 30″ |
Model | 250 Ton | 300 Ton |
Bed Size | 32″ x 32″ / 685″ x 940″ | 34″x 34″/ 812 x 1220 |
Bed to Ram | 22″/560 | 24″/610 |
Bed Bore | 11″ / 280 | 12″ / 305 |
Gear Dia | 48″ / 1220 | 54″ / 1370 |
Fly Wheel Dia | 52″ / 1320 | 58″ / 1475 |
Crank Shaft Dia | 9″ / 230 | 10″ / 255 |
Back Shaft Dia | 5½” / 140 | 6″ / 150 |
Stroke | 6″ / 150 | 6½” / 165 |
Hole in Ram Dia Clamping | 2½” / 65mm | 2½” / 5mm |
No. of Stokes | 40 | 38 |
Pully Size | 7″ | 8″ |
Total Height | 128″ | 104″ |
Motor Requirement | 20 H.P | 30 H.P |
Floor to Top of Bed | 30″ | 30″ |
Model | 10 Ton | 20 Ton |
Bed Size | 12″ x 14″ / 305 x 355 | 14″x 16″/ 355 x 405 |
Bed to Ram | 10″/254 | 11″/280 |
Bed Bore | 4″ / 100 | 4½” / 115 |
Gear Dia | 18″ / 457 | 22″ / 560 |
Fly Wheel Dia | 21″ / 533 | 26″ / 636 |
Crank Shaft Dia | 3″ / 75 | 3½” / 90 |
Back Shaft Dia | 2¼” / 55 | 2½” / 63 |
Stroke | 2¼” / 55 | 2½” / 63 |
Hole in Ram Dia Clamping | 1.9/8″ / 28mm | 1¼” / 32mm |
No. of Stokes | 75 | 66 |
Pully Size | 5″ | 6″ |
Total Height | 54″ | 70″ |
Motor Requirement | 1 H.P | 2 H.P |
Floor to Top of Bed | 28″ | 29″ |
Model | 30 Ton | 50 Ton |
Bed Size | 16″ x 18″ / 405 x 457 | 19″x 20″/ 482 x 508 |
Bed to Ram | 12″/305 | 13″/330 |
Bed Bore | 5″ / 127 | 6″ / 150 |
Gear Dia | 24″ / 610 | 26″ / 660 |
Fly Wheel Dia | 28″ / 710 | 32″ / 812 |
Crank Shaft Dia | 4″ / 100 | 4¾” / 118 |
Back Shaft Dia | 2¾” / 70 | 3⅛” / 80 |
Stroke | 3″ / 75 | 3½” / 88 |
Hole in Ram Dia Clamping | 1.3/8″ / 35mm | 1½” / 38mm |
No. of Stokes | 60 | 66 |
Pully Size | 6″ | 7″ |
Total Height | 76″ | 81″ |
Motor Requirement | 3 H.P | 5 H.P |
Floor to Top of Bed | 30″ | 30″ |
Model | 75 Ton | 100 Ton |
Bed Size | 22″ x 23″ / 560 x 555 | 25″x 27″/ 635 x 685 |
Bed to Ram | 14″/335 | 17″/430 |
Bed Bore | 7″ / 175 | 8″ / 200 |
Gear Dia | 30″ / 762 | 34″ / 864 |
Fly Wheel Dia | 38″ / 915 | 39″ / 990 |
Crank Shaft Dia | 5½” / 140 | 6½” / 166 |
Back Shaft Dia | 3½” / 90 | 4″ / 100 |
Stroke | 4″ / 100 | 4½” / 115 |
Hole in Ram Dia Clamping | 1.¾” / 45mm | 2″ / 50mm |
No. of Stokes | 55 | 50 |
Pully Size | 7″ | 7″ |
Total Height | 87″ | 93″ |
Motor Requirement | 5 H.P | 7½ H.P |
Floor to Top of Bed | 30″ | 30″ |
Model | 150 Ton | 200 Ton |
Bed Size | 27″ x 29″ / 686 x 735 | 32″x 32″/ 812 x 812 |
Bed to Ram | 19″/ 480 | 20″/508 |
Bed Bore | 9″ / 225 | 10″ / 200 |
Gear Dia | 38″ / 965 | 42″ / 1005 |
Fly Wheel Dia | 44″ / 1117 | 48″ / 1220 |
Crank Shaft Dia | 7½” / 190 | 8¼” / 210 |
Back Shaft Dia | 4⅜” / 118 | 5″ / 125 |
Stroke | 5″ / 125 | 5½” / 140 |
Hole in Ram Dia Clamping | 2¼” / 55mm | 2⅜” / 60mm |
No. of Stokes | 45 | 40 |
Pully Size | 7″ | 7″ |
Total Height | 102″ | 112″ |
Motor Requirement | 10 H.P | 15 H.P |
Floor to Top of Bed | 30″ | 30″ |
Model | 250 Ton | 300 Ton |
Bed Size | 36″ x 36″ / 915 x 915 | 40″x 40″/ 1015 x 1015 |
Bed to Ram | 22″/ 560 | 24″/ 610 |
Bed Bore | 11″ / 275 | 12″ / 300 |
Gear Dia | 48″ / 1220 | 54″ / 1370 |
Fly Wheel Dia | 52″ / 1117 | 56″ / 1420 |
Crank Shaft Dia | 9″ / 190 | 10″ / 225 |
Back Shaft Dia | 5½” / 140 | 6″ / 150 |
Stroke | 6″ / 150 | 6½” / 165 |
Hole in Ram Dia Clamping | 2½” / 65mm | 2¾” / 70mm |
No. of Stokes | 35 | 30 |
Pully Size | 7″ | 7″ |
Total Height | 120″ | 135″ |
Motor Requirement | 20 H.P | 30 H.P |
Floor to Top of Bed | 30″ | 30″ |
HYDRAULIC TMT BAR FORGING MACHINE
220 tons 40MM capacity, Hydraulic TMT Bar Forging Machineto be comprising of 01 Nos of Double Stroke Double Acting Hydraulic Cylinders of which one is the Hydraulic Clamping Cylinders & other is the Forging Cylinder, One nos of Forging Block with 01 nos Holder & 3 nos of Die Sets along with Punch & 03 nos of 7.5 H.P. Dual type (High Pressure & Low-Pressure Power Pack Unit.
IMC Threading taps are especially designed tools used to cut the female portion of a mating pair of metal fasteners. AThreading Tapremoves material from a pre-drilled or punched hole. The result produces threads within the drilled hole. The cutting edges at the front of a tap remove material from the workpiece. The chips are stored in the flutes, or pushed forward in front of the tap, or are drawn up along the flutes, removing the chips and cutting fluids from the hole.
A chamfer is a tapered portion at the front end of the tap. Both the chamfered portion and the first full thread beyond the chamfer produce the finished thread of the part.Industrial Machinery Corporationmanufactured Threading Taps as per industry standards and stands high on parameters of quality and durability.
Threading is divided into two types, internal and external.
Internal threading is done by using a tool called a TAP in a hole drilled to a specific diameter for the thread size and pitch you want to cut. External threads, such as for bolts and studs, are made by using a tool called a DIE, which is applied to a specific diameter of rod for the size and pitch of the threads you want to cut.
Taps and dies are tools used to create screw threads, which is called threading. Many are cutting tools; others are forming tools. A Threading Tap is used to cut or form the female portion of the mating pair (e.g., a nut). A die is used to cut or form the male portion of the mating pair (e.g., a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading. Both tools can be used to clean up a thread, which is called chasing.
A Threading Tap cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut.
Machine Tapping
Internal Threading Machineis used tool tap for internal threading. Machine tapping is faster, and generally more accurate because human error is eliminated.
Although in general machine tapping is more accurate, tapping operations have traditionally been very tricky to execute due to frequent tap breakage and inconsistent quality of tapping.
The Threading Taps offered by Industrial Machinery Corporation. Different types of Threading Taps can be used for internal threads such as BSW, NPT, UNF, METRIC, UNC, ACME, BSF Threads etc. Industrial Machinery Corporation will also offer the benefit of customization.
We are a noteworthy manufacturer and provider of premium qualityBuffing Machinethat is accessible with us in various details. This machine has propelled support for polishing the materials, machine, and so forth. Known for the simple and advantageous task, this machine is generally acclaimed by our customers. It is definitely manufactured under the stern observation of our deft group by making utilization of value guaranteed materials. Aside from this, we are offering thisBuffing Machineat reasonable costs to our customers.