Post Buy Requirement
IF
Bangalore, Karnataka, India
Add Review

Other Products / Services

Wax Heater

  • Heating media Through Oil heating System.4.5 KW/230 Volts.
  • Insulation Ceramic Fibre Blanket to minimize the heat loss
Inner tank made out of SS-304 2.5 mm thick Outer made out of MS with Powder coated.consisting of Digital Temperature controller- 1 No, Indication lamps, OnOff switch, Fuse carriers, and other electrical Switchgear items.
View Complete Details

Ceramic Fiber

Blanket is a needled blanket made from our ceramic fiber. The blanket is lightweight, flexible, and available in a wide variety of thicknesses, widths and densities.

IND3180 Blanket resists temperature as high as 2300. This material is lightweight and has very low thermal conductivity, excellent handling strength, low heat storage, thermal shock resistance and corrosion resistance (commonly used acid and alkali). It also provides excellent sound absorption and excellent fire protection.
View Complete Details

Fiber Board

CERAMIC FIBER BOARD is made of high purity alumina fibrous and alumina powder, to be formed and fired in special equipment with advanced patent process, can withstand temperature up to 1700.
View Complete Details

Ceramic Roller

High temperature industrial alumina ceramic rolle,
Material:Al2O3 ceramic,
Working temperature:1600C.
Good chemical resistant,
High temperature industrial alumina ceramic roller,
Material: Alumina ceramic.
View Complete Details

Mosi2 Heating Element

The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the "U"-shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken.(our suggestion: please choose the specialize power connector provided by our company)

The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick. The Dia.6 element cant be used of 170A for a long time. The Dia.9 element cant be used of 300A for a long time.
View Complete Details

SiC Heating Element

1. Withstands as high as 1500 (surface temperature).
2. Generates high heat output per unit surface area, approximately 5-10 times the output of Nichrome wire.
3. High strength and excellent shock resistance.
4. Heat source is free of noise and air pollution.
View Complete Details

Kanthal Iron-chromium

Ready-made metallic heating elements made from wire or strip in Kanthal iron-chromium-aluminium alloys or NikrKanthal and Alkrothal FeCrAl alloys are characterized by high resistivity and capability to withstand high surface load. They can be used at maximum element temperature of 1425C (2600F).

The NiCr-based alloys are characterized by very good mechanical properties in the hot state as well as good oxdiation and corrosion properties. They are suitable for element temperatures up to 1250C (2282F)
othal nickel-chromium alloys for element temperatures between 50 - 1200C Element types.
View Complete Details

Alumina Crucible

Alumina Crucible Is Used For Testing Laboratory And a Variety Of Industrial Analysis. Alumina Ceramic Crucible And Corundum Crucible Include: arc alumina crucible, square alumina crucible, rectangle alumina ceramic crucible, column ceramic crucible and a variety of shaped alumina ceramic crucible.

Temperature tolerance, at 1600 for long term application, and at 1800 for short term application;
High density of slip casting, high purity alumina crucible, specifications of 99% corundum crucibles: 5ml 10ml 15ml 20ml 25ml 30ml 50ml 100ml 150ml 200ml- 2500ml.
View Complete Details

Hot Air Ovens

Hot Air Ovens are built keeping in mind customer's practical requirements for different applications requiring precise temperatures in Laboratories, Hospitals & Industries. It is suitable for heating and solidification, drying and dehydration of raw materials in pharmaceutical industry, chemical industry, foodstuff industry, agricultural and sideline products, aquatic products, light industry, heavy industry and so on. Technical Specifications: .
View Complete Details

Aluminium Aging Ovens

IFC has succeeded in acquiring a strong foot hold in the market for our broad array of Aluminium Aging Ovens. We manufacture this superior range of Aluminium Aging Ovens using the premium grade steel and other raw materials that are unsurpassed in quality and by deploying the latest production processes. Our rich production experience and focus on achieving maximum client satisfaction aids us in manufacturing the highest quality and durable range of Aluminium Aging Ovens. Our professionals precision engineer our Aluminium Aging Ovens that find extensive application in heating aluminium at high temperatures and for different heat treating processes in various industries for making the metals aged. We can offer these Aluminium Aging Ovens in efficient designs as per the application requirements of our clients.
View Complete Details

Industrial Oven

We are engaged in designing and manufacturing custom built industrial ovens covering. Our range of industrial ovens is widely used in varied industrial applications and temperatures for drying, baking, conditioning, sterilizing, evaporating, preheating and curing of many processes and products. These industrial ovens, drying ovens, curing ovens are classified into two main types such as natural convection ovens with damper controlled induced air circulation or forced air recirculation with fully adjustable fresh air intake and exhaust .
View Complete Details

Electrical Heat Chambers

We manufacture and export high quality Electrical Heat Chambers and Ovens which are widely used in different industries for a variety of purposes. We only use genuine raw material in the production process and subject our final products to stringent quality checks in order to make sure that high international standards are followed.

Our range of Industrial Heavy Duty Oven is suitable for Transformer Drying Improving meager Value
View Complete Details

Process Indicator

Digital temperature indicators are used to indicate the process temperature and controllers are used to control the process temperature with indication. Temperature controllers can be offered with single or two set points.

Types: SR(PtPt Rh), K(CrAl), J(FeK), Pt - 100 .
Temperature Range: 0 to 1800 , 0 to 1200 , 0 to 600 , -250 to +400
View Complete Details

Data Logger

  • Accuracy Better than +/- 0.1% of the range
Communication (RS 485RS232) with software up to 4 Alarms, 3 Inputs, IO.Common Independent Low & High Alarm relays for each channel.24VDC Power supply for 2 wire transmitters on 3 channels.
Advanced parameter protection function can be set to avoid any illegal operation.
Flow integration with temp & Pressure compensation for steam & supersaturated steam.
View Complete Details

Rtds

RTDs - or Resistance Temperature Detectors - are temperature sensors that contain a resistor that changes resistance value as its temperature changes. They have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy, repeatability, and stability. Most RTD elements consist of a length of fine coiled wire wrapped around a ceramic or glass core. The element is usually quite fragile, so it is often placed inside a sheathed probe to protect it. The RTD element is made from a pure material whose resistance at various temperatures has been documented. The material has a predictable change in resistance as the temperature changes; it is this predictable change that is used to determine temperature. This page will help you better understand RTDs, but you can also speak to our application engineers at anytime if you have any special measurement challenges.
View Complete Details

Thermocouple Teflon Cables

Thermocouple Extension and Compensating cables with the PTFE and Fibre Glass Insulation. We make following constructions commonly with parallel as well as twisted form.
View Complete Details

Bobin Heater

These heater can be use to heat air dirctly or they can be used with a metalic sheath to heat semi-liquid and liquid such as water, oil, wax, fats, and bitumen. Sheating material used by Modern Radiant Heating Includes Mild Steel and Nickle-chromium steel. These Heater are made for single and three phase power supply. For more details and standard sizes available with us, contact us.
View Complete Details

Wax Tank

  • Caster Wheel 4” dia caster wheel will be provided
Construction:Inner tank made out of SS-304 2.5 mm thick Outer made out of MS with Powder coated.Heating media :Through Oil heating System.4.5 KW230 Volts.Control Panel:consisting of Digital Temperature controller- 1 No, Indication lamps, OnOff switch, Fuse carriers, and other electrical Switchgear items.
View Complete Details

Wax Melter

Revolutionary Wax Melter is Fast, Even Heating & Energy Efficient, Fast But Uses Less Electricity Than Most Coffee Makers. Permanent Heating Elements= No More Replacement Heaters. Insulated Melter Keeps Melter Hot Inside, Cool Outside.Round Inside & Square Outside for Faster Heating & Cleaning.
View Complete Details

Wax Pumper

  • Motor -Wax/td> 0.5 kw
Wax pumper with heater, Loading stand, pump motor, Blower, Hose pipe, Heat Tracers and VFD.

Inner chamber made out of SS-304, 2.5mm thick and outer MS of 2.5 mm thick with powder coating, Control panel consisting of relevant electrical switchgear items and Cast Iron wheels. and with Head Dispensing handle.
The volume of discharge is based on the speed of the pump and time selected. Once the switch at the discharge gun is actuated the motor runs with the output valve opened. After the set time both are switched OFF.
View Complete Details

Ceramic Fiber Board

We offer Ceramic Fiber Board.
IFC offers high temperature Ceramic Fiber Boards produced through wet forming process of ceramic fiber and binders. These ceramic fiber boards are featured with high temperature stability, low thermal conductivity, consistent density, and excellent resistance against thermal shock and chemical attack. Ceramic fiber board from Ceramaterials also resists oxidation and reduction. Ceramic fiber boards are available in a variety of temperature ratings, densities, thicknesses, widths and lengths, and custom vacuum formed shapes.
View Complete Details

Ceramic Fiber Blanket

We offer Ceramic Fiber Blanket.
Ceramic Fiber Blanket is a needled blanket made from our ceramic fiber. The blanket is lightweight, flexible, and available in a wide variety of thicknesses, widths and densities.It also provides excellent sound absorption and excellent fire protection.
View Complete Details

Lab Oven

We offer lab oven.
The unit is Laboratory type, with a double walled construction. The Inner Chamber is made of Stainless Steel (SS-304) 22G. The outer chamber is made of GICRCA, with powder coated finish in two tone color (Stainless Steel Buffed finished outer chamber can also be provided on request). Glass wool insulation of 65mm is present in between the walls to avoid heat dissipation.
View Complete Details

Omega Thermocouple Connectors

These flatround pin connectors are ideal for connecting thermocouple sensors and extension or compensating cable to each other. The pins are polarised to avoid an incorrect connection and the connector body is additionally marked for polarity. They are rated for use up to 210C, 350C or 650C
View Complete Details

Immersion Heater

We offer Immersion Heater.
Immersion Heater:
Immersion Heater used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element.Available in ranges of 1 KW to 4.5 KW with adaptor fittings 1" B.S.P to 212 " B.S.P threaded brass flanges duly nickel Chromium plated.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Industrial Furnace & Controls (Industrial Furnace & Controls)
  • 288/16/2, 3rd Cross, 9th Main, Gokula 1st Stage, 2nd Phase Bangalore - 560 054 ., Mathikere, Karnataka - 560054
  • Share us via