Features

• Inexpensive and accurate
• All Plastic wetted parts
• Easy to install and maintain
• Threaded housing allows field maintenance.
• Each fitting individually calibrated and marked with K factor. (ml/pulse)
• Ceramic ball bearing for superior low flow performance
• High amplitude pulse output signal can travel even 100 meter distance without the need of transmitter
• Sensor can be used directly with PLC or Data logger
• For best results it is recommended to provide a straight run of 10 and 5D on the upstream and  downstream respectively.

Temperature controllers are designed to perform the function of keeping an object or process at a desired temperature. In every application where controlling a temperature is required, a controller is used to set a temperature by way of a set point.

Application
Ideal for all types of Process Industry

Digital Temperature Indicator are available in Panel mounted model in various sizes. With Universal input they are mostly compatible with any input sensor for accurate temperature measurement.

Application
Ideal for all types of Process Industry

We offer Liquid Level Controller to automatically start & stop the pump with tank level input from Magnetic Float Switch or Cable Float Switch. Liquid Level Controller provides LED Indication for Power ON, Relay ON (Motor ON), Tank High & Tank Low.

Features

• Automatic ON / OFF Water Tank
• No More Overflow or Dry Run, thus saving Water Electricity & Manpower
• Increase the Pump set Life, Switch ON & Off automatically, Low Maintenance
• No Current / Voltage is passed through Water, therefore No Electrolysis Salt Deposition.

Miniature Level Switch is a compact construction, suitable for mounting vertically. Miniature Level Switch consists of a Reed Switch housed inside the guide tube & a permanent magnet inside the Float assembly. The Float moving with the liquid level makes (NC) & breaks (NO) the Reed Switch contact. Miniature Level Switch is used for sensing low, high or both high & low level in tanks.

Applications

• Water
• Diesel
• Hydraulic Oil
• Edible Oil
• Chemicals & Pharma

We are dealers for Full Bore Electromagnetic Flow Meter in process control instrumentation Maintenance free low cost, highly stable reliable & ideal flow meter suitable for wide ranges of liquid flow measurements the flow meter with low pressure. The measurement being based on ‘Faraday’s law of electromagnetic induction’ is independent of viscosity, density, pressure and temperature of the flowing media & measurement is a true volumetric flow measurement. Standard current output of 4 – 20 mA DC is provided which is directly proportional to the instantaneous volumetric flow rate.

Full Bore Electromagnetic Flow Meter can be used for precise flow measurement of all electrically conductive liquids such as sledges, slurries, sewage, milk, water and waste water.

Applications

• Chemical measurement, Water/ Wastewater Treatment & metering
• Building Automation & plant automation
• Pulp, paper, Food & Beverage
• Automated meter reading
• Drinking water / Public utility.

Dimensions

• 160 mm (L) x 100 mm (W) x 80 mm (D) (Head mount mounting)
• 64 mm (L) x 44 mm (W) x 35 mm (D) (remote Mounting)

The bi-metallic element consists of two strips of different metals, with different thermal expansion coefficients, inseparably joined together. This strip is spirally or helically wound with one end fixed to the body of the thermometer, and the other attached to the axis of a pointer. The Bimetal element directly drives pointer, eliminating gears and linkage. Temperature variation influences the bi-metallic strip such as to rotate the pointer; this rotation is indicated on a dial.

Applications
Chemicals, Refinery, Fertilizer, Cold Storages, Food, Beverages, Pulp Paper.

Model LV36 Hydrostatic liquid level transducers and transmitters with flush diaphragm is designed for a wide variety of level measurement applications. This model pressure sensor and is protected by the stainless steel (SS) housing. Featuring the flush diaphragm makes the LV36 suitable to measure viscous media or media with small particles, so as to have diverse measurement applications.The standard reference pressure is gauge (or relative) pressure realized through a vent tube in the cable. The reference pressure can also be absolute pressure on request.The measuring range of LV36 transmitters spans from 01 to 0200 meter water column (mH2O) withmeasuring accuracy of 0.5%fs (fs = full scale). The output signal of transmitters can be configured toeither current loop (420mA, standard), voltage output (0.54.5V, 15V), or digital output (I2C orSPI). The millivolt signal directly from the Wheatstone ridge circuit is also available on request(transducer version).

Features

• Measuring ranges: 01m, 2m, 3m, 5m, 6m, 8m, 10m, 12m 15m Higher length on request
• Output signal: 420mA (standard), other o/p optional available on request
• Accuracy: 0.5%fs o compensated temperature range: 070 C
• Construction: all stainless steel housing, rigid and robust Environment protection: IP68

Ultrasonic Level Transmitter works on the principle of calculation of time interval between emission and receipt of High Frequency sound wave. A high frequency sound wave emitted from a transmitter mounted inside a transducer hits the liquid surface, the time taken by the sound wave to return to receiver mounted inside the transducer will be proportional to liquid level”

Highlights

• Our entry level cost effective product
• Fast setup, configuration and commissioning
• Maximum range of 10mts (33fts)
• 4-20mA output and optional LCD display
• False echo tracing
• Direct installation on tanks, vessels and reactors
• Independent hand held programming unit for fast configuration of multiple units
• Perfect for diesel oil tank measurements
• Extended range of 0.25 to 15 meter (0.8ft to 49ft)
• Integral LCD display, keypad and integral 4-20 mA output
• Automatic compensation for different environment
• Approved for installations in hazardous areas (Ex)
• Simple to install and configure
• Direct installation on tanks, vessels and reactors

Miniature Head Mount Two wire Temperature Transmitter Model LTX-3000-H, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal.

Features

• Two wire design (supply and output on the same lines).
• Accepts RTD (Pt-100) / thermocouple / millivolt input.
• (4-20) mA non-isolated and isolated output from the sensor.
• ZERO and SPAN adjustments for on-site calibration.
• Easily fits in std. thermocouple head (weather or flame proof or in explosion proof JB).
• Loop supply of 12 to 36VDC (with loop continuity LED)
• Saturation or open sensor current limited to 25mA.
• Reverse polarity protection.
• Available in both head mount and DIN rail mount.

Applications

• Carry thermocouple or RTD signals over long distance without noise and loss of accuracy.
• Eliminates use of costly compensating cable.
• Useful for converting other mV/Ohms signal to equivalent 4-20mA loop

The traditional method for measuring the flow of air blown up through a grain heap. Suited to under-floor systems and blowing fans, the meter is used to confirm that there is adequate flow of air emitting from the surface of the grain. Ventilated grain ensures that the moisture content of the stored grain is kept within a safe limit by the steady flow of air through the grain. The INDUS Crop Airflow Meter for grain is an essential instrument for the successful storage of grain in bulk where under-floor blowing systems are in use.

Principle of operation
A lightweight float, made from a thin aluminium disc, moves up and down a tapered transparent tube. A wire running through the centre holds the float in place. The float has been designed to spin, removing possible errors by reducing friction. Air passing up the tube supports the float at a height where its weight is balanced by the pressure drop of the air. A scale on front side gives the flow rate in ft/min. On the opposite side of the tube is a white strip to aid reading the flow rate.

Introducing the Model CIE-305 Digital Thermometer, a portable hand held and compact digital thermometer designed to use an external K type thermocouple as a temperature sensor.

Applications
All Type of Food & Beverages Industries, Cooling Plants, Hot Rolling mills, Tea Gardens, Testing & Calibration. Operating Instruction manual provided along with the Instrument.

Thermocouples are temperature sensors made up of two dissimilar metals which are joined at one end forming a hot junction and the open wire end acting as the cold junction, the hot junction is in contact with the process. When the measuring point i.e. hot junction gets heated there is an EMF produced at the cold junction, due to difference in electron density of the two dissimilar metals and the temperature difference between cold end and hot end.

Depending on an application's process temperature range, accuracy specifications, and material compatibility, our sensors are available in Type K thermocouples, Type J thermocouples, Type E thermocouples, Type T thermocouples, Type S thermocouples, Type R thermocouples, and other dissimilar metal combinations. We manufacture thermocouple temperature sensors that can be designed with grounded or ungrounded junctions and housed in insulated sheath materials that are designed for best form fit in the applications.

RTD’s
Resistance thermometer use metals that alter their electric resistance when heated. Platinum is the most commonly used material for industrial RTD. However, Copper and Nickel are also used for some applications

Thermocouple
Thermocouple types are composed of common, inexpensive metals such as nickel, iron and copper. The thermocouple types J, K, R & S are of this group and are the most commonly used type of thermocouple.

Application Areas

• Oil & Gas
• Furnace
• Pharmaceuticals
• Power plant
• Chemical reactor
• Kilns industry
• Incinerator industry
• Ceramic and glass industry

Take measurements from a safe distance with the Infrared Thermometer. Don't get burned by a motor, or have hot and cold air blowing in your face from your HVAC system or blowers while taking measurements. Infrared thermometers to get accurate temperature readings from a safe distance.

Standard Accessories
Carrying case and Manual

Application
Distant measurement of Temperature in any Industrial plant, Coal Mines, Power Plants, Refectories, Kiln & Human Body temperature.

These thermometers enable measurement of temperature with an accuracy of +1% of the maximum scale value. This kind of thermometer system comprises a sensor bulb, transmitting capillary and a case containing a Bourdon Tube element. The system is filled with pressurised mercury. Temperature variation is measured by the Bourdon Tube system, and indicated on a dial.

Applications
Chemicals, Refinery, Fertilizer, Petrochemicals, Pharmaceutical, Power, Cement, Sugar, Food, Beverages, Pulp Paper, Allied process industries which are having corrosive media or environment

INDUS make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Typically, Magnetic Level Gauge consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator is principally designed as an alternative to glass level gauges. We offer Magnetic Level Gauge having top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic level indicators are tailor made to various types of construction and sizes

Key Feature
Glandless gauge with magnetic coupling for visual level indication of Hazardous or Toxic Liquids, where glass is unsafe or for dilute caustics, where glass is unsuitable.

Application
Textile Dyeing, Sewage Water Processing, Power Generation, Chemical Processing and Heat Transfer Ships / Bulk Carriers