Delhi, India
GST : 07AGEPA0695D1ZU
Verified
Add Review
Our Products
The TPR Injection Moulding Machine, offered by us, is precision engineered and designed with full perfection by our team of professionals having in-dept knowledge. We are a top-notch Manufacturer and Supplier of TPR Injection Moulding Machine from Delhi, India. It is robust constructed, compact in design, non-corrosive having longer service life. Buyers can purchase the Moulding Machine from us in bulk quantities as well and at the most discounted prices.
Service Features
Consectetur adipisicing elit. Facilis illum consectetur officia ad eveniet consequatur repellat, reiciendis expedita ratione molestiae eos dolor dolore saepe aut aliquid suscipit quod vitae ut.
Technical Specifications
| Type | TPR Single Station | TPR Double Station | TPR Three Station |
|---|---|---|---|
| Heating Power(KW) | 4 | 8 | 12 |
| Electrical Motors Power Installed (KW) | 17 | 28 | 40 |
| Width(mm) | 625 | 1140 | 1750 |
| Length(mm) | 2610 | 2610 | 2610 |
| Productions(Pairs/hr) | 30 to 60 | 40 to 120 | 50 to 180 |
| Total Net Weight(kg) | 1750 | 3300 | 5050 |
Specifications
| Calmping Force | 60 Tons |
|---|---|
| Injection Pressure | 140 Bars |
| Die Opening | 225 mm |
| Heating Zone | 2 |
| Colling Zone | 1 |
| L/d Screw Ratio | 14 |
This Deluxe Vertical Injection Moulding Machine (600 VRT) is a sophisticatedly designed machinery. This machine is widely known in the market for its low power consumption. The clients appreciate this machine for its longer functional life.
Technical Specifications
| Injection Unit | |
|---|---|
| Diameter of Screw | 55 mm |
| Maximum Shot Capacity | 600 Grms. |
| Plasticizing Capacity | 60 Kgs/hr |
| Stock of Screw | 230 mm |
| Number of Screw Rotation | 245 r.p.m. |
| Absolute Injection Pressure | 15.0 m/t |
| Specific Injection Pressure | 400 Kgs/cm2 |
| Mould Clamping Unit | |
| Clamping Pressure | 25m/t |
| Clamping Stroke | 100 mm |
| Maximum Mould Size (LxWxH) | 300 X 200 X 225mm |
| Electrical Equipments | |
| Motor for drive of oil pump | 7.5 H.P. |
| Motor for driving Plasticizing Screw | 10 H.P. |
| Heating Capacity | 4 K.W. |
| Heating Control (Pyrometer) | 2 No. |
| Sunvik | 5 No. |
| Hydraulic Equipments | |
| Hydraulic Pump | 52 Litres/mm |
| Pump Pressure | 120 Kgs/cm2 |
| General | |
| Floor area of machine | 750 mm X 1150 mm |
| Weight of Machine | Mounted on Machine {1.5 Tonne Approx} |
Avail from us energy efficient Super Deluxe Vertical Injection Moulding Machine (800 VRT) that is highly acclaimed by the clients. This machine has a longer functional life. We use precision engineered technology in the manufacturing of this machine.
Technical Specifications
| Injection Unit | |
|---|---|
| Diameter of Screw | 63.5 mm |
| Maximum Shot Capacity | 800 Grms |
| Plasticizing Capacity | 100 Kgs/hr |
| Stock of Screw | 300 mm |
| Number of Screw Rotation | 210 r.p.m. |
| Absolute Injection Pressure | 17.0 m/t |
| Specific Injection Pressure | 450 Kgs/cm2 |
| Mould Clamping Unit | |
| Clamping Pressure | 30m/t |
| Clamping Stroke | 100 mm |
| Maximum Mould Size (LxWxH) | 300 X 200 X 225mm |
| Electrical Equipments | |
| Motor for drive of oil pump | 10 H.P. |
| Motor for driving Plasticizing Screw | 12.5 H.P. |
| Heating Capacity | 5 K.W. |
| Heating Control (Pyrometer) | 2 No. |
| Sunvik | 6 No. |
| Hydraulic Equipments | 70 Litres/mm |
| Pump Pressure | 200 Kgs/cm2 |
| General | |
| Floor area of machine | 750 mm X 1150 mm |
| Weight of Machine | 1.8 Ton approx. |
Manufactured with an efficient use of proven technology, this Vertical Injection Moulding Machine (1000 VRT) is highly reliable in nature. This machine is easy to operate and handle. Clients admire this machine for its low power consumption feature.
Technical Specifications
| Injection Unit | |
| Diameter of Screw | 63.5 mm |
| Maximum Shot Capacity | 1000 Grms |
| Plasticizing Capacity | 100 Kgs/hr |
| Plasticizing Capacity | 100 Kgs/hr |
| Stock of Screw | 300 mm |
| Number of Screw Rotation | 210 r.p.m. |
| Absolute Injection Pressure | 17.0 m/t |
| Specific Injection Pressure | 500 Kgs/cm2 |
| Mould Clamping Unit | |
| Clamping Pressure | 35m/t |
| Clamping Stroke | 100 mm |
| Maximum Mould Size (LxWxH) | 300 X 200 X 225mm |
| Electrical Equipments | |
| Motor for drive of oil pump | 12.5 H.P. |
| Motor for driving Plasticizing Screw | 12.5 H.P. |
| Heating Capacity | 5 K.W. |
| Heating Control (Pyrometer) | 3 No. |
| Sunvik | 6 No |
| Hydraulic Equipments | |
| Hydraulic Pump | 70 Litres/mm |
| Pump Pressure | 180 Kgs/cm2 |
| General | |
| Floor area of machine | 750 mm X 1150 mm |
| Weight of Machine | 2 Ton app |
When it comes to Vertical Plunger Type Injection Moulding Machine, then our name is ranked among foremost Manufacturers and Suppliers in the market.
Special Features
Sturdy stable design powerful hydraulic operated toggle clamp die clamping direct cylinder High quality electric and hydraulic controls screw speed variable by hydraulic operated toggle clamp die clamping direct cylinder high quality electric and hydraulic controls screw speed variable by hydraulic pump all hydraulic pump all hydraulic components of standard quality are used for long life and trouble free operation fast and smooth cycles of operation.
Applications
The machine is suitable for producers: automobile and engineering components Electronic and Electrical Components, Textile mills components, containers, small toys, Cosmetic and toilet Articles, fountain and ball-pen and components for washing machine, grinders, pumps and various other domestic products.
Specifications
| Injection Unit | Units | Injection Unit | Units | ||
|---|---|---|---|---|---|
| Screw diameter | Mm | 28 | Maximum mould thickness | Mm | 200 |
| L/D Ratio | L/D | 16.1 | Maximum Mould thickness | Mm | 75 |
| Injection Rate | c.c/sec. | 42 | Maximum Area for Die mounting | Mm | 240x250 |
| Maximum Swept volume | c.c. | 52 | Mould Clamping Load | Tonnes | 05/03/07 |
| Shot Capacity (Polystyrene) | gms/shot | 40 | Mould Platen Size | Mm | 365x250 |
| Maximum Pressure on Melt | kg/cm2 | 1500 | |||
| Hopper Capacity | Ltr. | 5 | Electric | ||
| Screw Speed (variable) with Hydrometer | Rpm | 10/01/90 | Electric Motor 3 Phae (1440 rpm) | H.P. /kw | 2 |
| Injection Stroke with Hydromotor | Mm | 100+10 | Heat controlled by pyromter | no | 1 |
| Sucback | Total installed Power | k.w. | 7.2 | ||
| Optional | |||||
| Hydraulic Ejection Stroke | Mm | 40 | |||
| Hydraulic Ejector force | Ton | 1 | Capacity of oil tank | Ltr | 100 |
| Clamping Unit | Weight (Approx) | Ton | 1 | ||
| Maximum Day-Light Opening | Mm | 375 | Floor Space | ||
| Maximum Mould opening stroke | Mm | 175 | |||
We are one of the leading Manufacturers and Suppliers of Vertical Screw Type Injection Moulding Machine from New Delhi.
Special Features
Sturdy stable design powerful hydraulic operated toggle clamp die clamping direct cylinder high quality electric and hydraulic controls screw speed variable by hydraulic operated toggle clamp die clamping direct cylinder high quality electric and hydraulic controls screw speed variable by hydraulic pump all hydraulic pump all hydraulic components of standard quality are used for long life and trouble free operation fast and smooth cycles of operation.
Applications
The machine is suitable for producers: Automobile and engineering components computer components electronic and electrical components, textile mills components, containers, small toys, cosmetic and toilet articles, fountain and ball-pen and components for washing machine grinders, pumps and various other domestic products.
Specifications
| Model | - | SR-30 | SR-40 | SR – 60 | SR – 100 |
|---|---|---|---|---|---|
| Maximum Moulding capacity | GMS | 30 | 40 | 60 | 100 |
| Maximum Plasticsing Capacity | Kg/hr | 2 | 4 | 5 | 6 |
| Daylight Opening | Mm | 150 | 200 | 350 | 4000 |
| Maximum Mould height | Mm | 50 | 75 | 100 | 125 |
| Maximum mould size | Mm | 75x75 | 100x100 | 150x150 | 200x200 |
| Mould clamping Pressure | Tonne | 9 | 11.5 | 14.5 | 18 |
| Maximum No. Of Strokes | P/HRS | 100 | 140 | 180 | 180 |
| Electric Motor | HP | 3 | 5 | 5 | 7.5 |
| Heating Load | Kw | 1 | 1.5 | 2 | 2.5 |
| Floor Space | Ft | 5x2 ½ | 5x2 ½ | 6x3 | 61/2x31/2 |
We bring forth an exceptionally designed Airmax Vertical Injection Moulding Machine that is known for its rugged construction. This Airmax Vertical Injection Moulding Machine is energy efficient and ensures a longer functional life.
Technical Specifications
| Injection Unit | |
|---|---|
| Diameter of Screw | 63.5 mm |
| Maximum Shot Capacity | 2000 Grms. or According to Customer Requirement |
| Plasticizing Capacity | 100 Kgs/hr |
| Stock of Screw | 300 mm |
| Number of Screw Rotation | 210 r.p.m. |
| Absolute Injection Pressure | 17.0 m/t |
| Specific Injection Pressure | 500 Kgs/cm2 |
| Mould Clamping Unit | |
| Clamping Pressure | 35m/t |
| Clamping Stroke | 100 mm |
| Maximum Mould Size (LxWxH) | 300 X 200 X 225mm |
| Electrical Equipments | |
| Motor for injection | 7.5 H.P |
| Motor for drive of oil pump | 12.5 H.P. |
| Motor for driving Plasticizing Screw | 12.5 H.P. |
| Heating Capacity | 5 K.W. |
| Heating Control (Pyrometer) | 3 No. |
| Sunvik | 6 No |
| Hydraulic Equipments | |
| Hydraulic Pump | 70 Litres/mm |
| Hydraulic pump | 50 litres/mm |
| Pump Pressure | 180 Kgs/cm2 |
| General | |
| Floor area of machine | 750 mm X 1500 mm |
| Weight of Machine | 2.25 Ton approx. |
