A "U Jack" in scaffolding is a type of adjustable component used to provide vertical support and help level scaffolding structure. it is an essential part of scaffolding systems, contributing to their stability and versatility.

Anchor bolts are used to connect the steel columns or frames of the PEB to the foundation, providing resisting and stability lateral forces such as seismic loads. Properly designed anchor bolts are necessary for the structural performance of the Pre-Engineered Building, as they prevent the structure from shifting or overturning during adverse conditions.

Purlins are supported by both rafters or building walls when laid horizontally. As a rule of thumb, purlins are frequently proportioned for a depth-to-length ratio of 1/32. Higher-grade steel purlins have higher yield strengths, indicating good strength and load-carrying capacity. GI purlins may be more overpriced due to the additional cost of the galvanization process. HR purlins are often more cost-effective initially, but long-term maintenance costs should be considered if corrosion protection measures are needed.

A base jack, also known as a levelling jack or base plate, is a critical component in scaffolding and construction systems. its primary purpose is to provide a stable and adjustable foundation for scaffolding standards.

Prop Jack is a telescopic or extendable support device that is used in construction to temporarily support and stabilize structures, formwork, beams, slabs, or other elements. it can be adjusted to the required height and locked in place to provide load-bearing support.

Vertical typically refers to the orientation of scaffold components that provide vertical support or allow for vertical access. Vertical components are designed to help workers reach different heights safely and securely. Vertical scaffolding is essential when working on tall buildings and structures, as it allows workers to reach the required height for construction, maintenance, or repair tasks.

Ledgers can be either fixed or adjustable in length, depending on the scaffold design. A ledger is a horizontal scaffold tube or beam that runs parallel to the length of a scaffold structure. it connects multiple vertical standards (uprights) and helps distribute the load across the scaffold.

Shuttering plates, or formwork plates are flat, rigid panels made of materials like steel, plywood or engineered wood. They are used to create temporary moulds or forms into which concrete is poured to shape and support the concrete structure during curing.

MS Plates are flat steel plates made from mild steel and are widely used in various applications due to their versatility and ease of fabrication. Mild steel plates are favoured for their affordability, availability and versatility. They can be easy cut, welded, and shaped to suit a wide range of applications across different industries.

Steel angle, also named angle iron, or steel angle bar, is basically manufactured by hot-rolled carbon steel or high strength low alloy steel. it has L-cross shaped section with two legs - equal and unequal and the angle would be 90 degree.

A "U Jack" in scaffolding is a type of adjustable component used to provide vertical support and help level scaffolding structure. it is an essential part of scaffolding systems, contributing to their stability and versatility.

Anchor bolts are used to connect the steel columns or frames of the PEB to the foundation, providing resisting and stability lateral forces such as seismic loads. Properly designed anchor bolts are necessary for the structural performance of the Pre-Engineered Building, as they prevent the structure from shifting or overturning during adverse conditions.

Purlins are supported by both rafters or building walls when laid horizontally. As a rule of thumb, purlins are frequently proportioned for a depth-to-length ratio of 1/32. Higher-grade steel purlins have higher yield strengths, indicating good strength and load-carrying capacity. GI purlins may be more overpriced due to the additional cost of the galvanization process. HR purlins are often more cost-effective initially, but long-term maintenance costs should be considered if corrosion protection measures are needed.

A base jack, also known as a levelling jack or base plate, is a critical component in scaffolding and construction systems. its primary purpose is to provide a stable and adjustable foundation for scaffolding standards.

Prop Jack is a telescopic or extendable support device that is used in construction to temporarily support and stabilize structures, formwork, beams, slabs, or other elements. it can be adjusted to the required height and locked in place to provide load-bearing support.

Vertical typically refers to the orientation of scaffold components that provide vertical support or allow for vertical access. Vertical components are designed to help workers reach different heights safely and securely. Vertical scaffolding is essential when working on tall buildings and structures, as it allows workers to reach the required height for construction, maintenance, or repair tasks.

Ledgers can be either fixed or adjustable in length, depending on the scaffold design. A ledger is a horizontal scaffold tube or beam that runs parallel to the length of a scaffold structure. it connects multiple vertical standards (uprights) and helps distribute the load across the scaffold.

Shuttering plates, or formwork plates are flat, rigid panels made of materials like steel, plywood or engineered wood. They are used to create temporary moulds or forms into which concrete is poured to shape and support the concrete structure during curing.

MS Plates are flat steel plates made from mild steel and are widely used in various applications due to their versatility and ease of fabrication. Mild steel plates are favoured for their affordability, availability and versatility. They can be easy cut, welded, and shaped to suit a wide range of applications across different industries.

Steel angle, also named angle iron, or steel angle bar, is basically manufactured by hot-rolled carbon steel or high strength low alloy steel. it has L-cross shaped section with two legs - equal and unequal and the angle would be 90 degree.