• Size of Shade Card25 X 195 - 200 mm.

Shade card Machine consists of a set of grips between which the card is held with the help of knurling bolts. There is an arrangement to rotate both grips at a time.there is a stand on which the holding pins and guides for yarn etc. are mounted for easy movement of the yarns. The equipment is built on the fabricated base. It is finished in metallic or deco painting and bright chrome zinc plating to give it a corrosion resistant finish.

• ANGLE OF SAMPLE45°

Fabric testing equipment THE SPRAY DEVICE THE BUTTON PORTION HAVE A SAMPLE HOLDER AT 45° WHOSE CENTRE LIE AT THE CENTRE LINE OF THE SPRAY DEVICE. SPRAY DEVICE MADE OF GLASS (OR PLASTIC) LABORATORY FUNNEL WHICH IS CONNECTED TO THE SPRAY NOZZLE BY RUBBER TUBE.

• SUPPLY230 V AC, 50 Hz
• MOTOR SPEED0 TO 1500 RPM (APPROX)

Tensile strength tester are the two price characteristics of most of the raw materials. Whether they are metals or non-metals such as rubber leather textiles plastic paper or finished products such as rods wires ropes, yarns, belts etceteras. These two properties often play a major role in determining the suitability of any raw materials for any specified application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

Light fastness tester is used for determination of Colour Fastness to light using a 500 W mercury Ballast Tungsten Filament Lamp & internally phosphor coated. The equipment is suitable for all types of textiles except photocrometic coloured textiles.

• Pressure range7 Kg/Cm2 x 0.2 Kg/Cm2

Bursting strength tester Bursting strength of any material such as fabric, leather, paper etc. is its strength under action of a multi-directional force and is defined as the hydrostatic pressure required to produce rapture of the material when pressure is applied on one of its surfaces at a controlled increasing rate through a rubber diaphragm. "Innolab" Bursting Strength Tester is designed to find bursting strength of fabric leather paper paperboard. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimen has a continuous spiral groove and the lower clamping surface has a number of concentric grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate and the pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.

• SUPPLY230 V AC, 50 Hz
• MOTOR SPEED0 TO 1500 RPM (APPROX)

• Operating Speed150 / 160 rpm.

Yarn testing equipment The leas are either imperial leas having a swift perimeter of one and half yards with 80 turns or metric leas having swift perimeters of one meter with 100 turns.The yarn is spread uniformly in a band of 20mm as the leas are formed. Upto 5 - 10 leas can be formed at one time, if the arms of the reel can be docked to facilitate the removal of the leas from the reel. The number of turns is indicated on a counter. In case of motor operated Wrap Reel, a fractional horse power motor controlled by a pre-set counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of overtravel.

• Size of Shade Card25 X 195 - 200 mm.

Shade card Machine consists of a set of grips between which the card is held with the help of knurling bolts. There is an arrangement to rotate both grips at a time.there is a stand on which the holding pins and guides for yarn etc. are mounted for easy movement of the yarns. The equipment is built on the fabricated base. It is finished in metallic or deco painting and bright chrome zinc plating to give it a corrosion resistant finish.

• ANGLE OF SAMPLE45°

Fabric testing equipment THE SPRAY DEVICE THE BUTTON PORTION HAVE A SAMPLE HOLDER AT 45° WHOSE CENTRE LIE AT THE CENTRE LINE OF THE SPRAY DEVICE. SPRAY DEVICE MADE OF GLASS (OR PLASTIC) LABORATORY FUNNEL WHICH IS CONNECTED TO THE SPRAY NOZZLE BY RUBBER TUBE.

Textile testing instruments This is attained by mechanically agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap – soda solution. Before being rinsing and dried. The change in colour of specimen and stains of the adjacent fabrics are assessed with standard Grey Scale.

Beaker dyeing machine is a versatile, compact and maintenance free apparatus suitable for both Polyster and cotton sample dyeing. Infact it is suitable for dyeing of any fibre in form. The apparatus is of immense use for dyeing and processing units, researchtesting labs, textile engineering institutes and dyes manufacturers.