• MOQ 1 Set(s)
• inverter Duty MotorsLong Shaft
• Face MountingNo load watt loss below 30 watt
• Brand NameInnovative

We are offering cheese winder motor long shaft , 3-phase, 14402800 rpm, inverter duty, no load loss less than 30watt, c-face mounting. Powder coated cast body. Customised shaft available. rating from 90 watt to 180 watt , 1440 2800 rpm models.

• Brand NameInnovative

We offer premium Wet Grinder Motor that is in conformity with industrial standards. Our Wet Grinder Motor performs smoothly and is capable of withstanding extreme conditions. Along with the ability to produce less noise, our Wet Grinder Motor also has zinc plated end shield to prevent it from getting corroded. Specifications Excellent quality Steady performance Smooth in operation Low noise Specifications Of Electric Food Wet Grinder Motor 230V50Hz, 120W and 1300 rpm Insulation grade : Class B or Class F Inside of motor : Aluminium wire or copper wire Bearing : Bush bearing or ball bearing Zinc plated end-shieldsAluminium die casted open type end shields for corrosion resistance with double or single ball bearing Number of poles : 4 or 6

We offer Fractional Horsepower Motor, offered by us, is available in different specifications as per the requirement of the equipment. Our Fractional Horsepower Motor goes through a stringent quality check before final dispatch to the customers. Moreover, we make sure that our Fractional Horsepower Motor delivers high performance even in tough conditions. We provide Fractional Horsepower Motor at competitive rates. Why Our Fractional Horsepower Motor? High quality Competitive prices Highly reliable Manufactured in a world class plant Range Wide range of motors ranging from 20 watts (0.025 hp) to 2250 watts (3 hp) in single phase designs and in three phase designs for 50 Hz Standards Frames B42, B48 & B56 conform to BS 2048 part 1 for dimensions and BS 5000 part 11 IS 996 for performance. Rating Our Fractional Horsepower Motors are continuously rated to comply with performance standards. These motors can also be offered for specific applications for cyclic or short time duties. We Offer Following Enclosures Drip proof (DP) Totally enclosed (TE) Totally enclosed fan cooled (TEFC) Air over motors (AOM) Various Types Of Mountings Available Foot Stator pad Flange Foot cum flange End shield pad Stud Special mounting if required Bearing & Lubrication Sleeve bearing motors are lubricated for life by using special lubrication system. Ball bearing motors use double shielded deep groove bearings and are life lubricated. This offers trouble-free life to the motors. Rotor Shafts All shafts are made of EN8 steel and ground to 10 micron accuracy. All shafts are given anti rust treatment. Stainless steel shafts can also be supplied if required.

We are offering chimney exhaust stack that is designed by our expert technicians in accordance with the high quality standards of the industry. Chimney exhaust stack, offered by us, is fabricated for erection of self supporting chimney or exhaust gas silencer stack for generators, boilers, furnaces etc. Our chimney exhaust stack is available at competitive rates. specialties of our chimney exhaust stack excellent design structuremade with premium materialdurable available at reasonable rates.

• MOQ 1 Set(s)
• inverter Duty MotorsLong Shaft
• Face MountingNo load watt loss below 30 watt
• Brand NameInnovative

We are offering cheese winder motor long shaft , 3-phase, 14402800 rpm, inverter duty, no load loss less than 30watt, c-face mounting. Powder coated cast body. Customised shaft available. rating from 90 watt to 180 watt , 1440 2800 rpm models.

• Brand NameInnovative

We offer premium Wet Grinder Motor that is in conformity with industrial standards. Our Wet Grinder Motor performs smoothly and is capable of withstanding extreme conditions. Along with the ability to produce less noise, our Wet Grinder Motor also has zinc plated end shield to prevent it from getting corroded. Specifications Excellent quality Steady performance Smooth in operation Low noise Specifications Of Electric Food Wet Grinder Motor 230V50Hz, 120W and 1300 rpm Insulation grade : Class B or Class F Inside of motor : Aluminium wire or copper wire Bearing : Bush bearing or ball bearing Zinc plated end-shieldsAluminium die casted open type end shields for corrosion resistance with double or single ball bearing Number of poles : 4 or 6

We offer Fractional Horsepower Motor, offered by us, is available in different specifications as per the requirement of the equipment. Our Fractional Horsepower Motor goes through a stringent quality check before final dispatch to the customers. Moreover, we make sure that our Fractional Horsepower Motor delivers high performance even in tough conditions. We provide Fractional Horsepower Motor at competitive rates. Why Our Fractional Horsepower Motor? High quality Competitive prices Highly reliable Manufactured in a world class plant Range Wide range of motors ranging from 20 watts (0.025 hp) to 2250 watts (3 hp) in single phase designs and in three phase designs for 50 Hz Standards Frames B42, B48 & B56 conform to BS 2048 part 1 for dimensions and BS 5000 part 11 IS 996 for performance. Rating Our Fractional Horsepower Motors are continuously rated to comply with performance standards. These motors can also be offered for specific applications for cyclic or short time duties. We Offer Following Enclosures Drip proof (DP) Totally enclosed (TE) Totally enclosed fan cooled (TEFC) Air over motors (AOM) Various Types Of Mountings Available Foot Stator pad Flange Foot cum flange End shield pad Stud Special mounting if required Bearing & Lubrication Sleeve bearing motors are lubricated for life by using special lubrication system. Ball bearing motors use double shielded deep groove bearings and are life lubricated. This offers trouble-free life to the motors. Rotor Shafts All shafts are made of EN8 steel and ground to 10 micron accuracy. All shafts are given anti rust treatment. Stainless steel shafts can also be supplied if required.

We are offering chimney exhaust stack that is designed by our expert technicians in accordance with the high quality standards of the industry. Chimney exhaust stack, offered by us, is fabricated for erection of self supporting chimney or exhaust gas silencer stack for generators, boilers, furnaces etc. Our chimney exhaust stack is available at competitive rates. specialties of our chimney exhaust stack excellent design structuremade with premium materialdurable available at reasonable rates.