LED Track light is an excellent design for retail or architectural lighting with more than 50% energy saving compared to halogen lamp or CDM-T lamps. General FeaturesDisplay light with adjustable lamp headSecondary optical technologyFlicker free with low power consumptionMaterial: Aluminium AlloyWeight: 0.1 Kg

Solar Low Intensity Aviation Obstruction Light are used as warning lights for airway safety. These light require no cables and reduce the initial capital costs. They are used for aircraft safety on telecom towers, buildings, chimneys, high-rise structures and transmission lines.

General Features

• Intensity > 40 Candela
• Optical lens arrangement to provide 360 illumination by high intensity red LED
• Casing made from pressure die casting of aluminium alloy
• UV stabilized polycarbonate lens for 360illumination
• Dusk down control provide through control panel
• Gasket for moisture protection
• All screws are SS 304 corrosion resistant conforming to ICAO specifications
• Failure alarm system (optional)
• Base plate provided for easy installation
• Configuration: Duty and standby mode with failure alarm monitoring

Solar Low Intensity Aviation Obstruction Light are used as warning lights for airway safety. These light require no cables and reduce the initial capital costs. They are used for aircraft safety on telecom towers, buildings, chimneys, high-rise structures and transmission lines.

General Features

• Intensity > 40 Candela
• Optical lens arrangement to provide 360 illumination by high intensity red LED
• Casing made from pressure die casting of aluminium alloy
• UV stablised polycarbonate lens for 360illumination
• Dusk down control provide through control panel
• Gasket for moisture protection
• All screws are SS 304 corrosion resistant conforming to ICAO specifications
• Failure alarm system (optional)
• Base plate provided for easy installation

Medium intensity aviation warning light is used for aircraft safety for 45 mtrs and above as per ICAO, FAA guidelines.

General Features

• Patented design
• Casing made of die cast aluminium body, red powder coated
• UV stabilized optical lens for 360 illumination
• Conforming to ICAO/FAA Standards
• Inbuilt Photocell
• Special grade through secondary optical lenses
• Radio suppression conforming to BS800
• LPM technology
• Fixture Color: Red
• Tested by National Physical Laboratory, New Delhi
• Tested by ERDA, Vadodra
• Provided with 3 slots at 120

LED wall washer is used for theme based architectural lighting for indoor and outdoor applications with huge savings on electricity bills.

General Features

• Brass cable gland for water and dust protection
• High temperature silicon gasket on both ends for moisture protection.
• Direct adjustable mounting brackets.
• Clear toughened glass on top for protection.
• Throw of light is approx. 30 Feet
• DMX controller(Optional)
• Easy to install with help of screw
• Weight: 2.5 Kg

Power Lux is an excellent fixture for precision lighting of facades and surfaces with 50% energy saving compared to HPSV or MH lamp fixtures.

General Features

• Special extruded aluminium heat sink for better thermal management of LEDs.
• Modular type.
• Easy adjustable fixture for achieving proper light
• IP rating: 65
• Easy to install with the clamp provided
• Dimension: 370x235x126.5mm
• Weight : 2.0 kg

LED Track light is an excellent design for retail or architectural lighting with more than 50% energy saving compared to halogen lamp or CDM-T lamps.

General Features

• COB LED
• IP Protection: 40
• Operating Voltage: 8-270 V AC
• LED Color: Warm White/ Neutral White
• Track Length: 1 meter (0.250 kg Weight)
• Easy to install
• Weight: 1.090 Kg/ Light

D-Lite X-Slim is a surface mounted down lighter. It is replacement of 15 Watt CFL and used for indoor lighting with Energy saving of more than 50%.

General Features

• Surface mounted fixture
• Slim and light weight
• PMMA diffuser for uniform distribution of light
• No hot spot
• Weight 0.6 Kg.

Aviation LightsObstruction Light Are High-Medium-Low-Intensity Lighting Devices That Are Attached To Tall Structures And Used As Collision Avoidance Measures. Such Devices Make The Structure Much More Visible To Passing Aviation Aircraft And Are Usually Used At Night, Although In Some Countries They Are Used In The Daytime Also. These Aviation Lights Need To Be Of Sufficient Brightness In Order To Be Visible For Miles Around The Structure. Traditionally, Red Lamps (Or BeaconsHazard) Use Incandescent Filament Bulbs. In Order To Improve The Otherwise Quite Short Lifespan, They Are Made With A Ruggedised Design And Are Run Below Normal Operating Power (Under-Running). A Recent Development Has Been The Use Of Arrays Of High Power Red LEDs In Place Of Incandescent Bulbs, Which Has Only Been Possible Since The Development Of LEDs Of Sufficient Brightness. LED Based Aviation Lamps Have A Significantly Longer Lifespan Than Incandescent Bulbs, Thus Reducing Maintenance Costs And Increasing Reliability. Instapower Now Offers The Benefits Of LED Lighting In Its Collection Of Aviation Warning Light And LED Aviation Light. These Aviation Lights Are Installed Atop High Rise Structures, Buildings And Towers And Help In Protecting The Damage To Life And Property. We Offer Superior Quality Medium And Low Intensity Aviation Light , Which Meet All Specification Of International Civil Aviation Organization (ICAO), Montreal , Canada . These Provide The Benefits Of LED Lighting Technology And Require Low Initial As Well As Operating Costs And Serve For Long. These Aviation Light Can Be Installed At High Rise Structures As Per Their Heights And Widths And Are Vital For Safe Passage For Aviation, And Protection Of Valuable Human Life And Property. Instapower Has Developed These LED Based Models With The Objective Of Reducing The Power Consumption Without Making Any Compromise To The Performance And Specifications Required.

Obstruction Light Are High-Medium-Low-Intensity Lighting Devices That Are Attached To Tall Structures And Used As Collision Avoidance Measures. Such Devices Make The Structure Much More Visible To Passing Aviation Aircraft And Are Usually Used At Night, Although In Some Countries They Are Used In The Daytime Also. These Aviation Lights Need To Be Of Sufficient Brightness In Order To Be Visible For Miles Around The Structure. Traditionally, Red Lamps (Or BeaconsHazard) Use Incandescent Filament Bulbs. In Order To Improve The Otherwise Quite Short Lifespan, They Are Made With A Ruggedised Design And Are Run Below Normal Operating Power (Under-Running). A Recent Development Has Been The Use Of Arrays Of High Power Red LEDs In Place Of Incandescent Bulbs, Which Has Only Been Possible Since The Development Of LEDs Of Sufficient Brightness. LED Based Aviation Lamps Have A Significantly Longer Lifespan Than Incandescent Bulbs, Thus Reducing Maintenance Costs And Increasing Reliability.

Instapower Now Offers The Benefits Of LED Lighting In Its Collection Of Aviation Warning Light And LED Aviation Light. These Aviation Lights Are Installed Atop High Rise Structures, Buildings And Towers And Help In Protecting The Damage To Life And Property. We Offer Superior Quality Medium And Low Intensity Aviation Light , Which Meet All Specification Of International Civil Aviation Organization (ICAO), Montreal , Canada . These Provide The Benefits Of LED Lighting Technology And Require Low Initial As Well As Operating Costs And Serve For Long. These Aviation Light Can Be Installed At High Rise Structures As Per Their Heights And Widths And Are Vital For Safe Passage For Aviation, And Protection Of Valuable Human Life And Property. Instapower Has Developed These LED Based Models With The Objective Of Reducing The Power Consumption Without Making Any Compromise To The Performance And Specifications Required.