My ExportersIndia

For Buyer

For Seller

For Help

Insulation Solutions
gstGST : 07BGLPB9364A1ZJ Write a Review

Our Products

  1. Plastic Component 10 Products available
  2. Natural And Synthetic Resin 5 Products available
  3. Plastic Sheets 5 Products available
  4. Polyethylene Sheet 2 Products available
  5. Tapes 2 Products available
  6. PVC, PP & Plastic Products 2 Products available
  7. Floor Mats 2 Products available
  8. Hand Gloves 2 Products available
  9. Apparel Fabrics & Dress Materials 2 Products available
  10. Plastic Sheet 1 Products available
  11. Acrylic Sheet 1 Products available
  12. Industrial Plastic Pipes 1 Products available
  13. Roofing Sheets 1 Products available
  14. Safety Hats 1 Products available
  15. PVC, HDPE, FRP & Plastic Pipes 1 Products available
  16. Gumboots 1 Products available
  17. Industrial & Engineering Products 1 Products available
  18. Envelopes 1 Products available
  19. PVC Sheets 1 Products available
  20. Gaskets 1 Products available
  21. Rubber Sheet 1 Products available
  22. Fashion Jewelry 1 Products available
  23. Rope 1 Products available
  24. Bearings And Bearing Components 1 Products available
  25. Others Products 4 Products available

Plastic Component

Our product range contains a wide range of HDPE Rod, PTFE Machining Parts, PTFE Moulded Rods, Polypropylene Rod and Nylon Rods

HDPE Rod

  • Material Hdpe
  • Thickness 50-60mm
  • Length 5Ft
  • Standard Diameter (MM) 10mm to 300mm
  • Standard Length (mm) 300, 600, 1000

High Density Polyethylene is made from Petroleum, and is more crystalline. Made by polymerisation with addition of co monomers, HDPE possess hardness and good temperature resistance. HDPE stock-shapes offer a working temperature upto 90 degree Celsius. With good machinability and better mechanical properties, HDPE provides better mechanical properties than PP and is a cheaper option to Nylon.

Features

  • Durable and strong
  • Resists cracking
  • Good chemical resistance
  • Easy to fabricate
  • Lightweight


APPLICATIONS

  • Chemical tanks
  • Cutting boards for food preparation
  • Water pipe flanges (HDPE pipe grade)
  • Outdoor and indoor playground systems
  • Marine construction (pile guards, bumpers, anti-skid surfaces)
  • Orthotics and prosthetics AFOs, KAFOs
  • Light duty tank, chute and bin linings
  • Outdoor cabinetry and furniture
View Complete Details

PTFE Machining Parts

1,000 / Piece Get Latest Price
  • Number Of Flower Ptfe Machining Parts
  • Application Industrial Use
  • Surface Finishing Non Polished, Polished
  • Thickness 3 mm to 25 mm
View Complete Details

PTFE Moulded Rods

  • Material Virgin PTFE and Filled PTFE
  • Category PTFE
  • Diameter 16, 19, 20, 22, 25, 28, 30, 32, 35, 38, 40, 42 etc
  • Length (MM) 300
  • Made to Order Specific Length , Diameter available as per customer’s requirement .
  • Filter Glass/ carbon/Graphite / Bronze+Mos2
  • Specification No. ASTM – D 1710

we are one of the leading manufacturers, suppliers, and exporters of high quality ptfe moulded rod. These products are ideally suited for the manufacture of corrosion-resistant gaskets and seals. These products are manufactured using high quality raw materials that are sourced from reliable vendors. These products are highly appreciated for their insulating and chemical resistant properties. These products are self-lubricating material that provides a low friction coefficient.

features :

  • excellent insulating properties
  • moulded ptfe rod has the lowest coefficient of friction of all known solid materials
  • it has the best electrical properties of all plastics
  • ptfe rod exhibit astonishing chemical resistance
  • ptfe is a self-lubricating material that provides a low friction coefficient, and is ideally suited for the manufacture of corrosion- resistant gaskets & seals.


application :

  • seals, gaskets and stem valves
  • wear and slide machined parts
  • chemical resistant fixtures
  • scientific aircraft and electronic parts
  • steam and high temp seals
  • petrochemical & chemical industry
  • food & pharamaceutical industry
  • linning of special pipe tube & glasses , vesseles & lab counter tops
  • insulating sheath , anti corrosion insulation pipe
  • lubricated bearing & piston ring
View Complete Details

Polypropylene Rod

  • Material Polypropylene
  • Shape Round
  • Length 50-100cm
  • Packaging Type Creamy
  • Pattern Plain
  • Feature Durable, High Strength

Polypropylene (PP) is light, strong, having resistance to chemicals and with a low friction surface, all of which make it ideal as a replacement for wood or metal which are the materials traditionally used. PP is a high corrosion resistant material, which exhibits excellent tensile strength and stiffness at elevated temperatures.



View Complete Details

Nylon Rods

  • Standard Thickness (mm) 10mm to 300mm
  • Standard Width(mm) : 300mm , 600mm , 1000mm

nylon rods are characterised by a combination of high strength, toughness, abrasion resistance, low weight, non-corrosive, low coefficient of friction, self lubricating, anti-vibration and noise damping. Parts fabricated out of our nylon replaces metal parts such as bushes, bearings, slide plates, gears, gear racks, wear plates, washers, gaskets, seals, sleeper pads for rolling mills, liners, wheels, sleeves, pulleys, ropeway tyres, rollers etc. Which were originally fabricated out phosphor- bronze, gun metal, brass, white metal, steel and other expensive metals.
features

  • wear resistant
  • good strength with low coefficient of friction
  • self l-ubricating
  • reasonably priced compared to mechanical properties offered.
  • reduction in weight shock resistance
  • improved dimensional stability
  • vibration damping performance
  • high wear and abrasion resistance
  • noise reduction
  • high service temperature
  • high tensile and compressive strengths machining.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us