Intech Fire & Security

Airoli, Navi Mumbai, Maharashtra

4004R is a two-hazard releasing system that incorporates big-panel features into a small and cost-effective package. Its dual hazards can be programmed to provide an agent release for one hazard and preaction or deluge for the other, giving a high degree of flexibility and protection. With the early detection capability of the agent release hazard, the fire should be extinguished before the preaction or deluge system is activated.

For facilities requiring from five to ten initiating zones, the Simplex 4006 Series conventional fire alarm control panels provide flexible initiating circuit monitoring, extensive programmable control capability, and central station connectivity.

Simplex fire alarm solutions are trusted the world over, helping protect millions of people every day in large facilities that range from hospitals, hotels and universities to airports, office buildings and sky scrapers. Customers choose Simplex products for their industry-leading scalability, reliability, long-term value and technology. Now, the Simplex 4007ES panel brings advanced Simplex performance to smaller facilities.

Simplex fire alarm solutions are trusted the world over, helping protect millions of people every day in large facilities that range from hospitals, hotels and universities to airports, office buildings and sky scrapers. Customers choose Simplex products for their industry-leading scalability, reliability, long-term value and technology. Now, the Simplex 4007ES panel brings advanced Simplex performance to smaller facilities.

The Simplex 4010ES fire alarm system is a highly flexible and powerful 1, 000-point addressable analog system for small- to mid-sized facilities. Unlike many systems of this size, points can be used for detectors, modules or manual stations as needed to meet the requirements of each building. Labor-saving features such as device-level ground fault isolation and almost dirty smoke sensor status reports reduce installation time for electrical contractors and allows for proactive maintenance to be scheduled at one-time to help eliminate unwanted nuisance alarms for owners and end-users.

4100ES addressable fire alarm control panels support up to 2, 500 points, fire alarm and emergency voice communication, self-testing notification appliances and IP based networking. With scalable architecture and future-proof design, 4100ES panels are ideal for medium to large facilities and multi-building campus style networks. All Simplex addressable panels rely on TrueAlarm addressable detectors.

TrueAlarm addressable heat sensors provide rate-compensated, fixed-temperature sensing, selectable with or without rate-of-rise temperature sensing. Due to its small thermal mass, the sensor accurately and quickly measures the local temperature for analysis at the control panel. Rate-of-rise temperature detection is selectable at the control panel. Fixed temperature sensing is independent of rate-of-rise sensing.

TrueAlarm Multi-Sensor Devices combine the established performances of a TrueAlarm photoelectric smoke sensor with a TrueAlarm thermal sensor to provide both features in a single sensor/base assembly. Smoke and thermal activity are correlated to provide intelligent fire detection earlier than either activity alone.

Designed to meet NFPA low-frequency signaling requirements for unattended sleeping areas, the TrueAlarm 520Hz Sounder Base is a perfect solution for hospitality, education, and multi-occupancy residential applications. It offers an efficient, cost effective way to upgrade existing systems to NFPA compliance with minimal disruption.

The CO Sensor Base is the ideal solution for detecting toxic CO gases in critical areas, such as residential properties, dormitories, hotels, nursing homes, and assisted living facilities. The CO sensor base has a replaceable CO element that can either work independently as a toxic gas detector or be combined with a photo or heat sensor to provide a method to reduce unnecessary alarms from common sources such as steam from showers, aerosols from personal care products, cooking materials, dust, and exhaust fumes. The CO sensor base does not require a separate device to be mounted on the wall or ceiling. An smoke or heat sensor can plug into the base with the CO sensor element, saving mounting space as well as installation costs compared to using two independent units.

Beam Detectors are used to provide open-area smoke detection in situations where it is either impractical or not cost-effective to use traditional point-type detectors or aspirating smoke detection. Some common applications include warehouses, atriums, convention centers, shopping malls, and sports arenas. The Addressable Beam Detector provides enhanced command, control, configuration and status/event reporting between the detector and the fire alarm control panel. Configuration, installation, diagnostics, service, and maintenance are simple and fast, saving time and money for contractors, installers, and building owners. It is compatible with 4100ES and 4010ES fire alarm control panels.

Repeated operation of the appropriate acknowledge switch will scroll the LCD display showing activity in the sequence of occurrence. The tone-alert also pulses to indicate the operation of any of the push-button switches.

When water comes into contact with the detection cable a control unit can detect changes in the electrical characteristics of the cable and signal an alarm or other action. The sensor cable is available in pre-terminated lengths for simple assembly and extension. Non-sensing pre-terminated lengths are also available when the cable is to pass through areas which do not require protection.

Auto-Aligns using the integrated user interface just steer the laser onto the Reflector, then at the flick of a switch, it aligns itself. 8 times faster than previous detectorsOne person installation everything can be done by one personOne standalone product no specialist tools required; minimal prior knowledge and training needed

Analog and digital controller4 or 8 lines, up to 32 detectorsUp to 32 fully programmable relays (OR, AND, NAND, NOR, Voting functions)Large graphic displayRemote modules (cost savings on wiring installation)USB Data logging capabilityRS485 Modbus RTU and multiple analog outputsSIL-1 Certified to IEC/EN 61508 and EN 50402 functional safety standards

Digital transmitter without displayAvailable with catalytic bead or electrochemical sensorsDetects O2, combustible gas, and toxic gasesAvailable for detection of O2, CO2, H2S, NH3, NO, NO2, Methane, Propane, Butane and HydrogenFor commercial and light industrial applications (laboratories, cooling rooms, hospitals, boiler rooms, waste water treatment plants, etc.)ATEX 3G certified for use in zone 2For use only with the MX43 controller

4-20 mA analog transmitter without displaySIL2 capability for LEL, O2, CO, H2S, NH3, CO2Detects combustible, toxic or refrigerant gases and O2Available with electrochemical, infrared or semi-conductor sensorsDesigned for industrial applicationsAvailable in explosion-proof or intrinsically safe versions, and stainless steelA high-temperature version allows operation up to 200C

We offer the Olct 60 Analog Transmitter, a reliable solution for accurate temperature measurement. This transmitter comes in a sturdy box packaging, operates on a 24V DC power supply, and provides a 4-20mA output signal. With a measurement range of -50 to 150 degrees Celsius and an accuracy of 0.5% of full scale, it ensures precise monitoring in various industrial applications. Ideal for distributors seeking quality temperature sensing solutions, the Olct 60 Analog Transmitter is a dependable choice for efficient and effective temperature control.

Detects Explosive and Toxic Gas, or OxygenNon-Intrusive CalibrationSmart Infrared Gas SensorsHART Communication Protocol (NEW)MODBUS CommunicationProgrammable RelaysDual Gas Sensing

Water-ProofCorrosion-ProofVibration-ProofMulti-Layer Surge ProtectionUp tPre-emptive Fault Diagnostics

The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants.

Compatible with Detcon RXT & CST Tranceivers32 channel capacity panelsReal time 4 line 40 character LCDField device status and location tagAlarm condition LEDs and optional strobe & hornNon-intrusive operator interface

Low Power Gas Detection SensorsBuilt-in DisplayClass I, Div. 1, Groups B, C, & DNon-intrusive Magnetic InterfaceBuilt-in DiagnosticsFully Encapsulated ElectronicsElectropolished 316SS ConstructionQuick Thread Release (for sensor replacement)

Self-healing mesh network topologyUniversally accepted 2.4 GHz non-licensed frequencyLow power gas detection sensors with built-in transceiversBuilt-in display for gas sensor/field device HMDisposable battery packs

Low-Cost monitoringMonitor CO, Cl2, H2S, NO2, SO2, O2, NH3, NO, or HClCan monitor, transmit and control4-20 mA or ModBus RTU outputsLight industrial or commercialBuilt In Alarm/Buzzer

Simple user interfaceFull bump, calibration and charging optionsCan monitor, transmit and controlBump/calibration results storageStand-alone, PC or Ethernet optionsRobust construction

Simple user interface Full bump, calibration and charging options Can monitor, transmit and control Bump/calibration results storage Stand-alone, PC or Ethernet options Robust construction

Powerful audible alarm (103 dB @ 1m)Run time of up to 170 hoursMore than 4-month datalogging capacityEasily transportable - less than 7 kilos2.4 GHz frequency30 Devices per network MX 40 Up to 32 Devices, Wired or Wireless Up to 16 BM 25Configurable up to eight zonesAlarm and Fault Condition LEDs

Excellent false alarm immunityWide field of viewThrough lens optical check4-20 mA and relay ouptuts as standard4-20 mA Hart optionSIL 3 Certified

The FLAMEVision flame detectors use patented IR array and triple IR solar blind technologies to provide reliable and cost effective fire detection solutions. FLAMEVision can be trusted in high dependency situations where fast acting and accurate flame detection is essential. FLAMEVision detectors offer superior performance in all weather conditions and all lighting situations with the added benefit of fire event location information provided by the IR array. FLAMEVision can protect all hydrocarbon risks in non-hazardous and classified hazardous explosive atmospheres. There is a wide range of system design options available including several monitoring and control interface types and integrated video camera for verification purposes. Installation and maintenance

"The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the temperature surrounding the cable reaches the activation temperature the two cores quickly come into contact and trigger an alarm. These cables are known as digital because they are off below the activation temperature and irreversibly switch on when the activation temperature is reached." The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the temperature surrounding the cable reaches the activation temperature the two cores quickly come into contact and trigger an alarm. These cables are known as digital because they are off below the activation temperature and irreversibly switch on when the activation temperature is reached. The following alarm temperatures are available:

Using water as a fire suppressant in areas where electronics operate and irreplaceable, high-value assets are stored, could be as devastating as fire itself. The SAPPHIRE Clean Agent System quickly suppresses fires and protects sensitive equipment without causing harm to people or the environment. The system is especially suited to suppress fires in areas where an electrically non-conductive medium is required, where electronic systems cannot be shut down in an emergency, where cleanup of other agents poses a problem, and in normally occupied areas that demand a non-toxic agent. Here we use FK5112/Novec1230 fire protection fluid for total flooding applications. The clear, colorless agent has zero ozone depletion potential, an atmospheric lifetime of just five days, and a global warming potential of 1.0. System suppresses a fire before it can be fully engaged and once the fire is suppressed, FK5112/Novec 1230 quickly evaporates without harming any valuable assets.