My ExportersIndia

For Buyer

For Seller

For Help

Pressure Switches

Leading Manufacturer, Supplier & Retailer of Air Flow Sensor, Water Pump Pressure Switch, Operated Pressure Switch, Bourdon Tube Pressure Switches and Durable Pressure Switch.

Air Flow Sensor

  • Output 12 to 24 V DC
  • Material Plastic
  • Application Automobile
  • Supply Voltage 5 V DC
View Complete Details

Water Pump Pressure Switch

  • Wetted Materials Silicone, steel, and SS.
  • Temperature Limits 1).40°F (60°C
  • Repeatability ±5 psig (±0.3 bar).
  • Electrical Ratings 20 A @ 120 VAC, 12 A @ 240 VAC, 9.6 A @ 240 VAC (3 phase), 8.6 A @ 32 VDC, 3.1 A @ 120 VDC, 1.6 A @
  • Conduit Connection 7/8" hole for 1/2" conduit hub (2 places).
  • Process Connection 1/4" female NPT.
  • Weight 0.75 lb (0.34 kg).
View Complete Details

Operated Pressure Switch

  • Process Connections 1/4" female NPT.
  • Wetted Materials Nylon reinforced Buna-N and steel. PTFE and 316 SS optional
  • Temperature Limits 30 to 150°F (-35 to 66°C).
  • Electrical Connections Screw termina
  • Conduit Connection 7/8" (22.23 mm) hole for 1/2" (12.7 mm) conduit hub.
View Complete Details

Bourdon Tube Pressure Switches

  • Switch Type SPST mercury switch, SPDT mercury switch, SPDT snap switch, or SPDT hermetically sealed snap switch.
  • Wetted Materials Brass, 403 SS, or 316 SS.
  • Temperature Limit 180°F (82°C).
  • Enclosure Rating General purpose, weatherproof or explosion-proof.
  • Repeatability ±1% of full operating range, ±1.5% on DS-7300 models.
  • Set Point Adjustment Thumbscrew.
  • Weight General purpose: 4 lb (1.8 kg). Weatherproof: 6 lb (2.7 kg). Explosion-proof: 8 lb (3.5 kg).
View Complete Details

Durable Pressure Switch

  • Switch Type 1 SPST NO, 1 SPST NC. NO and NC switch independent from each other
  • Operating Pressure 150 psi (10.3 bar) for 0.5-24 psi set point ranges,
  • Wetted Materials Base: 304 SS, Diaphragm: polyimide film.
  • Temperature Limit -40 to 248°F (-40 to 120°C).
  • Enclosure Rating IP65 - Weatherproof.
  • Repeatability ±10% of set point.
  • Electrical Ratings 15 A @ 6 VDC, 8 A @ 12 VDC, 4 A @
View Complete Details

Subminiature Pressure Switch

  • Switch Type SPST, 100 VA, 42 V
  • Electrical Connection 1/4" (6.3 mm) spade terminals or flying leads.
  • Wetted Materials Polymide film and brass.
  • Temperature Limits -40 to 250°F (-40 to 121°C).
  • Pressure Limits 500 psi (34 bar).
  • Enclosure Rating IP68 (Submersible models only).
  • Repeatability ±5% of highest set point.
  • Process Connection 1/8" male NPT.
  • Weight 0.14 lb (0.06 kg).
  • Deadband 1-2 psi (0.07-0.14 bar).
View Complete Details

Adjustable Pressure Switch

  • Switch Type SPDT snap action.
  • Electrical Connection 3-wire, 20 AWG insulated with PVC, 12" (30 cm) length.
  • Wetted Materials Capsule: 17-7 PH SS; Fitting: 303 stainless steel.
  • Temperature Limit -65 to 225°F (-54 to 107°C), a set point change of up to 2% when used below - 10°F (-23°C) or above
  • Pressure/Vacuum Limits 150% of range.
  • Electrical Ratings 5 A @ 250 VAC, 3 A @ 28 VDC.
  • Process Connection 1/8" male NPT.
  • Weight 3 oz (85 g).
View Complete Details

Low Pressure Transducer

  • Accuracy ±0.25% F.S. (RSS). Includes non-linearity, hysteresis, and non-repeatability.
  • Wetted Materials 318 Duplex SS, Ceramic, Fluoroelastomer .(FKM).
  • Housing Material 318 Stainless Steel.
  • Stability 0.25% F.S./1 year
  • Temperature Limits -40 to 212°F (-40 to 100°C).
  • Compensated Temperature Limits -5 to 140°F (-20 to 60°C).
  • Power Requirements : 4-20 mA: 9-35 VDC; 0-5 VDC: 7.5-35 VDC.
  • Output Signal 4-20 mA (2-wire) or 0-5 VDC (3-wire).
  • Response Time 5 ms.
  • Max Loop Resistance 1.325 kΩ.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us