Ambala, Haryana, India
Our Product / Services
Suitable for making simple cells, cylindrical with ground edges.
| Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapours, mist etc. to protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed tiles and counter balanced slid ' ing Sash Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 Hz power plug. A work bench/ Table (optional) to install the equipment any where in the lab can be supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer. |
Versatile chamber for fumigating for sterilization with insecticide for preservation clothes, plants, old books etc. Made of sturdy board, mica covered, Epoxy coated from inside with fume circulator of electric motor. Top cover tightened with clamps. One drawer is provided for keeping perti-dish for fumigants chemical. Castor wheel provided for easy movement.
01 Size- 90 x 60 x 80 cm.(36" x 24" x 32")02 75 x 50 x 65 cm.(30" x 20" x 26")03 50 x 40 x 55 cm.(24" x 16" x 22")
Fabricated out of transparent Imported Perspex sheet with fit-in type cover. The joints are chemically welded to make it perfectly leak-proof. The imported sheet is non-corrosive to almost all animal and plant preservatives.
Sizes
A compact and sturdy instrument designed with latest technology for complete automatic dehydration and filtration of human, animal and plant?s tissues, up to final fixing in wax. Preprogrammable provision for dehydration cycle (user selectable) is a standard feature. Glass door with lock and key arrangement provided for easy viewing also prevents unauthorised tampering of timing cycle.
Tissues are subjected to continuous agitation by rotating S.S. Tissue basket for thorough penetration of reagents. Provision for automatic adjustable delay start is a standard feature. Imported thermostat controls S.S. Wax bath temperature and maintains it throughout the process.
Supplied complete with One S.S. Basket Rotor, One S.S. Tissue Basket, 24 Nos. S.S. Tissue Capsules, 10 Nos. One litre capacity Glass Beakers, 11 Nos. Beaker Covers, 2 Nos. S.S. Wax Baths each fitted with reputed make Thermostat, 5 Nos. 24 hours calibrated metallic timing discs, and One notch plier to program timing disc.
Suitable to work on 220 V, single phase, 50 Hz, AC supply.
Spare Accessories :?
See Enlarge
Compact model, suitable for use in small Laboratories. Supplied with One S.S. Basket Rotor, One S.S. Tissue Basket, One S.S. Wax Bath, 24 Nos. S.S. Tissue Capsules, 6 Nos. S-type Dividers.
Suitable to work on 220 V, single phase, 50 Hz, Ac supply.
Well designed features for precise and accurate serial sectioning, with feed setting visible from front, improved locking device and counter balanced wheel. Light weight cover hinged at back provides for easy access to internal parts for cleaning and oiling. Feed is adjustable from 1 to 50 microns in steps of 1 micron. Free up and down movement of object clamp. Automatic restricted total excursion of 28 mm by disengaging the feed mechanism to prevent jamming.
Ball and flange object clamp provides flexible orientation of object piece. Takes specimen upto 32?27 mm on stem of block holders. Knife holder allows for 120 mm on 180 mm long knife. Cutting angle is adjustable through 30 degrees. Two levers release knife holder for resetting angles and a third lever releases the entire assembly for movement on slide way to adjust horizontal distance from object.
Latest cam system eliminates the conventional cord system for feeding, resulting in better section cutting and improved efficiency of the machine.
Supplied complete with One knife 120 mm long with back and handle in wooden box, 2 block holders, One bottle of lubrication oil, rexin cover complete in all respects.
Most elegant and sturdy, latest range of incredibly reliable Microtomes. Constructed for excellent precision and quality sectioning. Unique adjustable block holder, allowing technicians to alter the block angle for poorly embedded tissue. Rugged, sturdy construction for easy to operate, maintain and quick to clean.
Complete with counter balancing wheel, automatic feed mechanism and feed release. Light aluminium cover hinged at back, protects the internal mechanism. Heavy casted base plate fitted with heavy rubber pads to provide better grip. Smooth operation and extremely versatile for uniform serial sectioning adjustable from 1 to 50 microns in step of 1 micron. Feed mechanism is independent of other movements.
Supplied complete with one knife, having back and handle in wooden box, 6 block holders, One bottle of lubricating oil and rexine cover.
Spare Accessories
Specifications
|
MODEL |
XPO-85/Z80 |
XPO-88/86 |
XPO-51/31 |
XPO-97/196 |
XPO 68K |
XPO 11 |
|
CPU |
8085/Z80 |
8088/86 |
8051/31 |
8096/196 |
68000 |
68HC11 |
| MEMORY CAPA.
Monitor EPROM Battery Back Up Scratch Pad (Expandability) |
36KB(64 KB) 16KB(64 KB) 4KB( 8 KB) |
128 KB 64 KB (128 KB) 64 KB ( 64 KB) |
36 KB 16 KB (64KB) 2 KB ( 8KB ) |
24KB 16KB 8KB |
128KB 64KB (128 KB) 64KB |
24KB 20KB 8KB |
| ADVANCED S/W Assembler Disassembler (Optional)
|
1 Pass line assembler 2 pass Assembler 2 pass Disassembler Basic Interpreter Hex Dump |
Line assembler Disassembler, Hex Dump. |
1 Pass line assembler Disassembler |
Disassembler and assembler facility with S/W on floppy. |
1 Pass line assembler Disassembler |
1 Pass line assembler Disassembler |
| ADDITIONAL SERIAL I/O
|
SID/SOD Based (8085)
NA (Z80)
|
NA
|
Using built-in TxD/RxD
|
Using built-in TxD/RxD | Using built-in TxD/RxD (6850) | Using built-in TxD/RxD |
| INTERRUPTS | 8 Nos.Using 8259(8085)
4 Nos. Using CTC(Z80) |
8 Nos. Using 8259A | Built in CPU 2no. of ints. | Built in CPU
8 no. of Ints. |
Built in CPU
7 no. of Ints. |
Built in CPU
7 no. of Ints. |
| Spencers Tissue flotation bath has a low profile rectangular design for easy work flow. The bath area is illuminated to aid visualization of tissue sections. The black anodized aluminum interior enhances visibility. Features include a heating element light thermostat, heat regulator and an on/off switch. Operating range of bath is usually 60 degrees C. * Tissue Flotation bath with thermostat control. * Tissue Flotation Bath with microprocessor based digital control. |
Fabricated out.of thick c.r.c.a. sheet, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.
Size- Wdt. Dpt. Ht. Exhaust Duct No. 122
01 4' x 2.6'x 31/2' 3" dia02 5' x 3' x 31/2' 4"03 6' x 3' x 31/2' 4"
