International Industrial Springs

Wagle Estate, Thane, Maharashtra

Hot-coiled springs are generally used in elevated temperatures, high load applications or in a corrosive environment. The transportation industry, Agriculture equipments manufacturers, and construction equipments manufacturers are some of the largest users of the hot coiled springs.

Generally springs with bar diameter greater than 12.7mm (0.5 in.) are hot coiled. Bars of carbon or alloy steel are generally used for hot-coiled springs. For most hot-coiled springs, finished hardness requirement is in the range of Rockwell C 44-53.

IIS can manufacturer hot coiled springs up to 92mm or 3.62 inch wire diameter and OD 450mm or 17inches.

IIS Disc Springs offer a well-developed solution to many engineering problems. Disc Springs can be used as single disc or arranged in stacks. A Disc Spring stack can consist of disc springs either used in Series or Parallel sets. Disc Springs are available with or without contact flats. Disc Springs are manufactured to DIN 2093 and designed as per DIN 2092.We have custom designprogram to assist our customers for their specific applications. Our group 1 & 2 Disc Springs are AUSTEMPERED, this method of heat treatment is particularly effective for high fatigue Disc Springs.

No Deformation or Fatigue under normal loads.
2.High Energy Storage Capacity.
3.Long Service Life.
4.Stock keeping is minimized as the individual spring sizes can be combined universally.
5.Space Saving.
6.Largely Self-damping, giving good shock absorption and energy dissipation.
7.Efficient use of space and high spring force with small deflections.
8.Adaptable to stacking in numerous configurations.
9.Combination use as a modular spring element.
10.Low Maintenance cost & Greater Security
11.Low height/thickness ratio employed reduces stresses

IIS Manufactures & Supplies Garter Spring

Garter Springs are helical coil springs whose ends are connected together to form a circular shape to provide a strong Radial Force. Compression garter springs exert outward radial forces, while extension garter springs exert inward radial forces.
Most of these springs are used in oil seals, shaft seals, belt-driven motors, and electrical connectors, etc.
They can easily handle pressure, viscosity, and temperature changes and prevent contamination from water, dust, dirt, lubrication, and chemicals. They can be supplied pre-assembled into loops, or in lengths this is particularly useful for standard weights or diameters, as it allows you to cut and assemble your garter springs as needed.

InstallationSpring load and deflection largely depend on the type of end and installation. Every torsion spring will have two points of contact at the end and one at the arbor. While designing, the position of the contact points and their relative position should be made clear.

Types of EndsA great care must be taken while deciding spring ends as different types of ends and special end forming result in higher cost and frequent tool change.Spring Materials - Common spring materials include stainless steel, alloy steels, carbon steels and some non-ferrous materials. IIS also produces spring from Exotic material like Inconel X-750, Inconel 718, Nimonic 90, Monel, Nimonic, Hastelloy, Beryllium copper etc.Spring design IIS can design torsion springs for you depending on your application, space and torque requirement. IIS can manufacturer torsion springs with all types of ends and sizes. Please send us your requirement and we will be free to help you.Surface coating IIS offer a variety of coating on springs like Mechanical Zinc plating, Zinc Electro plating, Nickel Plating, Electrolysis Nickel plating, Geomet, Daromet coating, Cadmium plating, Powder coating, Epoxy painting etc.

Reckoned for our extensive array of products, we efficiently serve our customers from Thane (India). Our organization is endowed by a massive circulation system that allows us to reach purchasers wherever and distribute orders on schedule.

More About Information of Garter Springs :

• Garter Springs are helical coil springs whose ends are connected together to form a circular shape to provide a strong Radial Force. Compression garter springs exert outward radial forces, while extension garter springs exert inward radial forces.
• Most of these springs are used in oil seals, shaft seals, belt-driven motors, and electrical connectors, etc.
• They can easily handle pressure, viscosity, and temperature changes and prevent contamination from water, dust, dirt, lubrication, and chemicals. They can be supplied pre-assembled into loops, or in lengths – this is particularly useful for standard weights or diameters, as it allows you to cut and assemble your garter springs as needed.

Backed by a productive network, our company is able to cater to buyers all over Maharashtra(India) and other Maharashtra(India)s with ease. If you are interested in obtaining Torsion Springs at market leading prices, we are its responsible and responsive suppliers.

Torsion Springs resist external torque with angularly deflecting ends. Contrary to its name, the wire is subjected to bending stress and not torsional stress. These are close wound springs. After deflection, the body length increases and coil diameter reduces.

InstallationSpring load and deflection largely depend on the type of end and installation. Every torsion spring will have two points of contact at the end and one at the arbor. While designing, the position of the contact points and their relative position should be made clear.   


Types of EndsA great care must be taken while deciding spring ends as different types of ends and special end forming result in higher cost and frequent tool change.
IIS can manufacturer torsion springs with all types of ends and sizes. Please send us your requirement and we will be free to help you.

We will not let you wait much, as we have trustworthy shipping facilities available to deliver the same in set time. We are the most promising name when it comes to Torsion spring.

Our wide area network helps us in delivering the products across Maharashtra(India) and other markets. Owing to our immense expertise in this domain, we have carved a niche as a Supplier of Hot Coil Springs in the market.

Disc Springs are conically formed angular Discs, which are loaded in the axial direction. Disc Springs offer a well-developed solution to many engineering problems. Through a unique combination of high force in a small space, Disc Springs can be used as single disc or arranged in stacks. A spring stack can consist of either single spring or parallel spring sets. Disc Springs are available with or without contact flats. Disc Springs and Belleville Washers are manufactured to DIN 2093 AND din 6796. We have computerized design programmed to assist our customers for their specified applications. Disc Springs are manufactured from imported 50CrV4 material. Our Disc Springs are Austempered. This method of heat treatment is particularly effective for springs, as it gives the maximum toughness and therefore considerable durability.

Advantages of Disc Springs

• No Deformation or Fatigue under normal loads.
• High Energy Storage Capacity.
• Long Service Life.
• Stock keeping is minimized as the individual spring sizes can be combined universally.
• Space Saving.
• Largely Self-damping, giving good shock absorption and energy dissipation.
• Efficient use of space and high spring force with small deflections.
• Adaptable to stacking in numerous configurations.
• Combination use as a modular spring element.
• Low Maintenance cost
• Greater Security