Our Products
ApplicationsIt is recommended for use in Heavy Duty Commercial Vehicles, Light Commercial Vehicles & Multi-utility vehicles fitted with high speed naturally aspirated or Turbo charged diesel engines operating at low speed and high torque conditions that are prevalent in prolonged city stop & go driving conditions and also in hilly regions.
Performance Benefits
Performance Level
Health and Safety These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
Characteristics | IS 1448 | Typical Figures |
10W-30 | ||
Appearance | -- | Clear & Bright |
Colour, Visual Observation | -- | Red |
Density @15°C, gm/ml | P:16 | 0.8911 |
K.V at 100° C, cSt | P:25 | 14.1 |
Copper Corrosion @ 100° C for 3 hrs | P:15 | 1a |
Flash Point, (COC), °C | P:69 | 240 |
Viscosity Index | P:56 | 113 |
Pour Point, °C | P:10 | -24 |
Foaming Tendency / Stability: Qty. of foam in ml | P:67 | |
a) Sequence I | Nil / Nil | |
b) Sequence II | 10 / Nil | |
c) Sequence III | Nil / Nil |
MAK Multigrade Engine Oil Pdf
ApplicationsThey are recommended for high speed Naturally Aspirated/Turbo /Supercharged diesel engines operating at low speed and high torque conditions prevalent in prolonged city stop & go driving conditions and also in hilly regions. They are recommended for use in Heavy-Duty Commercial Vehicles, Light Commercial Vehicles & Multi Utility Vehicles. This oil was evaluated in 'Double Decker' buses of M/s.BEST, Mumbai and oil drain interval of 22, 000 kms.was established. They also demonstrated the Long Drain capability in APSRTC buses.
Performance Benefits
Performance Level
Health and Safety These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
Characteristics | IS 1448 | Typical Figures | |
30 | 40 | ||
Appearance | -- | Clear & Bright | Clear & Bright |
Colour, Visual Observation | -- | Red | Red |
Density @15°C, gm/ml | P:16 | 0.8712 | 0.8961 |
K.V at 100° C, cSt | P:25 | 11.4 | 14.4 |
Copper Corrosion @ 100° C for 3 hrs | P:15 | 1a | 1a |
Flash Point, (COC), °C | P:69 | 230 | 240 |
Viscosity Index | P:56 | 96 | 95 |
Pour Point, °C | P:10 | -9 | -12 |
Foaming Tendency / Stability: Qty. of foam in ml | P:67 | ||
a) Sequence I | Nil / Nil | Nil / Nil | |
b) Sequence II | 10 / Nil | 10 / Nil | |
c) Sequence III | Nil / Nil | Nil / Nil |
Mak Gold Engine Oil Pdf
ApplicationsIt is suitable for all types of diesel passenger cars & commercial vehicles, earthmoving machinery, construction industry & power units for constant high speed or stop-start service under severe conditions. It is specially recommended for use in vehicles meeting EURO I&II norms.Field Trials conducted on TELCO/Ashok Leyland vehicles established a drain interval of 24000 kms.
Performance Benefits
Performance Level
Health and Safety These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
Characteristics | IS 1448 | Typical Figures |
15W-40 | ||
Appearance | -- | Clear & Bright |
Colour, Visual Observation | -- | Brown |
Density @15°C, gm/ml | P:16 | 0.8788 |
K.V at 100° C, cSt | P:25 | 14.4 |
Copper Corrosion @ 100° C for 3 hrs | P:15 | 1a |
Flash Point, (COC), °C | P:69 | 226 |
Viscosity Index | P:56 | 137 |
Pour Point, °C | P:10 | -27 |
Foaming Tendency / Stability: Qty. of foam in ml | P:67 | |
a) Sequence I | Nil / Nil | |
b) Sequence II | 10 / Nil | |
c) Sequence III | Nil / Nil |
MAK Diamond Engine Oil Pdf
ApplicationsIt is recommended for use in latest generation Diesel engine vehicles to meet Euro-II and Euro-III emission norms. However, this oil can also be used in vehicles requiring API CG-4 or CF-4 oil. This oil has been licensed by American Petroleum Institute (API) to market under their "DONUT symbol.
Performance Benefits
Performance Level
Health and Safety These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
Characteristics | IS 1448 | Typical Figures |
15W-40 | ||
Appearance | -- | Clear & Bright |
Colour, Visual Observation | -- | Brown |
Density @15°C, gm/ml | P:16 | 0.8885 |
K.V at 100° C, cSt | P:25 | 14.2 |
Copper Corrosion @ 100° C for 3 hrs | P:15 | 1a |
Flash Point, (COC), °C | P:69 | 232 |
Viscosity Index | P:56 | 145 |
Pour Point, °C | P:10 | -24 |
Foaming Tendency / Stability: Qty. of foam in ml | P:67 | |
a) Sequence I | Nil / Nil | |
b) Sequence II | 10 / Nil | |
c) Sequence III | Nil / Nil |
MAK CH4 Engine OiL Pdf
Excellent lubrication properties reduce wear on wires and strands, maximising service life. Ideal for use on ROV umbilicals. Suitable for all non-friction drive wire ropes.
These oils are suitable for all types of diesel passenger cars, commercial vehicles and earth moving machinery.
Our lubricants are completely compatible with food processing machinery and materials. It performs the same technical functions as with any other lubricant: provide protection against wear, friction, corrosion and oxidation, show compatibility with different materials.
ApplicationsThis oil is recommended for agricultural pump sets, threshers, sugarcane harvesters/crushers etc
Performance Benefits
PerformanceLevel
Health and Safety These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
Characteristics | IS 1448 | Typical Figures |
40 | ||
Appearance | -- | Clear & Bright |
Colour, Visual Observation | -- | Red |
Density @15°C, gm/ml | P:16 | 0.888 |
K.V at 100° C, cSt | P:25 | 14.4 |
Copper Corrosion @ 100° C for 3 hrs | P:15 | 1a |
Flash Point, (COC), °C | P:69 | 222 |
Viscosity Index | P:56 | 96 |
Pour Point, °C | P:10 | -8 |
Foaming Tendency / Stability: Qty. of foam in ml | ||
a) Sequence I | P:67 | Nil / Nil |
b) Sequence II | 10 / Nil | |
c) Sequence III | Nil / Nil |
Mak Pump Engine Oil Pdf
ApplicationsThis oil is recommended for various make and models of tractors.
Performance Benefits
PerformanceLevel
Health and Safety These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
Characteristics | IS 1448 | Typical Figures | |
40 | 20W-40 | ||
Appearance | -- | Clear & Bright | Clear & Bright |
Colour, Visual Observation | -- | Brown | Brown |
Density @15°C, gm/ml | P:16 | 0.8865 | 0.887 |
K.V at 100° C, cSt | P:25 | 14.3 | 14.4 |
Copper Corrosion @ 100° C for 3 hrs | P:15 | 1a | 1a |
Flash Point, (COC), °C | P:69 | 246 | 224 |
Viscosity Index | P:56 | 98 | 118 |
Pour Point, °C | P:10 | -9 | -24 |
Foaming Tendency / Stability: Qty. of foam in ml | |||
a) Sequence I | P:67 | Nil / Nil | Nil / Nil |
b) Sequence II | 10 / Nil | 10 / Nil | |
c) Sequence III | Nil / Nil | Nil / Nil |
Mak Trac Engine Oil Pdf