Other Products / Services #5366386

The dust concentration is measured depending upon the amount of light blocked by suspended articles in exhaust gas. Advanced techniques are effectively used to detect & compensate for errors due to ambient light as well as stationary dust giving accurate emission readings. Unique design of Swirling Chamber ensures effective cleaning of lenses.

Tips of nails never get coated as they are away from the Pipe.Free to expand as well as vibrate at one end. Increasing rapping efficiency.Design can be accommodated in any framemake.The sharp nails possess higher corona generating ability as compared to any other emitting electrode geometry.The desired corona level can be achieved by welding desired amount of nails on the pipe.The desired corona field can be produced by welding nails of desired lengths.The desired field strength can be achieved by welding the nails at a par-ticular angleCorona generates at lower voltage which increases the level of useful power being fed to the ESP.

IFI guillotine damper, has the main function of isolation of equipment to permit inspection, maintenance, or repair in addition to process isolation. Occasionally, guillotine dampers are specified for bypass ducts, if operation requirements allow enough time for the slow-moving blade to travel across the opening. The standard guillotine model is designed forassembly to be performed in such a way that the gate slides vertically. The guillotine damper is made up of a gate whichslides along metal guides, closing the conduitcompletely. The ends are joined to the conduits bymeans of flanges. The guillotine damper isnormally supplied as a single part. The body of the guillotine damper can beinsulated externally depending upon application requirements.

The powder when thrown into the Bag House will follow the Path of the Gas. Where there is a leakage the gas will tend to exit through it. The fluorescent powder when it passes along with the gas through the leakage will glow in UV light supplied along with the Powder identifying the leakage with ease.

Rotary Air Lock valves are one of the most commonly used Dust Extraction Systems in the Process Industry. A rotary valve or airlock is used to feed solids between areas of differing pressure while still maintaining the pressure differential and product flow. The word rotary refers to the fact that during operation of a rotary airlock, the vanes turn or rotate. As they turn, the pockets, which are formed between the vanes, become rotating pockets. The bulk material being handled enters the pockets at the top, through the Inlet port, travels around in a rotating motion, and exits at the bottom, or through the Outlet port. As the vanes and pockets continue to turn, material continues to be moved from top to bottom, or from Inlet port to Outlet port, in a rotating motion.

The Engineering team at IFIdrawing inputs from its years of combined experience has designed, engineered & manufactured the ESP to meet the latest industry standards. High Reliability of this design sources its strength from Advanced Flow Studies. Unmatched Rapping Density Highest impact accelerating. Optimum Electrial Charging for Changing process conditions. Application specific rigid emitter design that can produce ultimate corona density. The maintenance aspect is reduced to its minimum by the emitters ruggedness & High Alumina Electrical insulators with strength next to diamond.

Slide Gates are used to control and isolate the discharge of bulk materials from hoppers, bins, silos or conveyors.Slide Gates consist of a rigid frame mounted to the bottom of the storage device or conveyor.A slide plate is located inside the frame that either opens or closes against the flow of material. The slide plate can be moved by manual, pneumatic, electric or hydraulic means.The slide plate being a wear component is made from high wear resistant material & can be offered in various MoCs.IFI manufacture slide gates to meet specific customer requirements & sizes.

IFI Butterfly dampers are available for a wide variety of applications in round ductwork, where low-leakage isolation, flow control, or a combination of the two is desired. Varying degrees of isolation can be obtained from 90 to 99.9% depending on the seal arrangement. Heavy-duty design that is suitable for applications with clean, corrosive, dirty, andor dry environments. Manufactured in-house under strict quality control procedures. IFIs range of butterfly dampers are best suited in Duct and Ventilation system where flow control and balancing is required.

IFI has always been a pioneer in offering new Technologies to our esteemed customers at affordable prices & at the same time maintaining world-class quality. With the newmanufacturing unit is based in Pirangut, located on the outskirts of Pune, Maharashtra, we are geared up to manufacture more than 1000 Cages per day.

The screw sampler is designed for sample extraction of dry and non-sticky powdered material from a duct or chute through which free flow of material is taking place. The sampler is driven by a geared motor coupled to a transport screw, crossing the flow of material. As an option, the screw sampler can be equipped with variable speed geared motor. The screw transports the extracted material to a discharge outlet chute where the material falls by gravity to the subsequent sample preparation equipment.

Our cages are available in a variety of configurations, finishes and materials, including stainless steel.Heavy duty shipping crates are used to protect the cages during shipment and at the site. 100% quality check & assurance.Weld strength withstanding 100T crush test on cages.Straightness & Ovality maintained 01 mm meter.

Ionisation Filtration Industries Pvt. Ltd. has taken a step forward and improved its manufacturing capabilities by setting up its own automated brand new line of Cage Manufacturing. IFI has always been a pioneer in offering new Technologies to our esteemed customers at affordable prices & at the same time maintaining world-class quality. With the newmanufacturing unit is based in Pirangut, located on the outskirts of Pune, Maharashtra, we are geared up to manufacture more than 1000 Cages per day. Our cages are available in a variety of configurations, finishes and materials, including stainless steel.Heavy duty shipping crates are used to protect the cages during shipment and at the site.

Rotary Air Lock valves are one of the most commonly used Dust Extraction Systems in the Process Industry. A rotary valve or airlock is used to feed solids between areas of differing pressure while still maintaining the pressure differential and product flow. The word rotary refers to the fact that during operation of a rotary airlock, the vanes turn or rotate. As they turn, the pockets, which are formed between the vanes, become rotating pockets. The bulk material being handled enters the pockets at the top, through the Inlet port, travels around in a rotating motion, and exits at the bottom, or through the Outlet port. As the vanes and pockets continue to turn, material continues to be moved from top to bottom, or from Inlet port to Outlet port, in a rotating motion.

For Higher Reliability and Lower Emissions there are few technologies that can match the performance of a Pulse Jet Bag Filter. IFIs Pulse Jet Bag Filter design is highly versatile & provides excellent separation efficiency. The cleaning of the bags is done by compressed air pulses on the basis of continuous Differential Pressure monitoring using state of the art Sequential Controller.

Heavy-duty design that is suitable for applications with clean, corrosive, dirty, andor dry environments. Manufactured in-house under strict quality control procedures. IFIs range of butterfly dampers are best suited in Duct and Ventilation system where flow control and balancing is required.

There was a time when smoke bellowing out of a chimney was considered to be a sign of industrialization. In todays environmentally cautious ageeven the analysis of suspended particles in visibly clean gas is mandatory. ESP has proved itself time & again to be the most economical equipment for handling high volume gas. Thus making it the first choice for various industries. With Ever increasing number of industrial processes, the importance of the ESP has increased considerably. The latest advancements in Electronic Control Systems has proved itself in enhancing the reliability & performance of the ESPs. IFI brings the latest in ESP Technology right to your door step to fulfill the ever increasing needs of the industry.

Double flap valve is continuous material discharge equipment. Double Flap Valve has a two door flap plate which open and close alternatively.