Post Buy Requirement
JK
Ankleshwar, Gujarat, India
Add Review

Other Products / Services #1858228

Articulated Boom Lifts

  • 10 and 15 M platform height, With 220 kg capacity
  • Outreach : 4.84 Mto 7.63 m
  • Suitable for both indoor and outdoor use
  • Advanced electronic MOSFET controllers For enhanced efficiency
View Complete Details

Carbon Fiber And Graphite Packings

Self-Lubricating - Low Friction - High Peripheral Speed Heat Conductivity and Thermal Stability Chemical Resistance Corrosion Inhibitors
View Complete Details

Air Operated Double Diaphragm Pumps

Double Diaphragm Pumps are designed for use in applications requiring large volume transfer in a short time Driven by compressed air, these can transfer contaminated media & are very useful for cleaning out pits with mixed liquids such as oil, water etc. Handle a wide variety of fluids with solid content: as there are no close fitting or rotating parts Self priming: pump is designed for high suction lift even at dry start up & also with heavier fluids Ability to run dry: as there are no close fitting or sliding parts Portable / simple installation: Simply connect air supply line & liquid line; pump is ready to perform Explosion proof: safe pumps since they are operated by compressed air Pumping efficiency remains constant: no rotors, gears or pistons that wear over time, hence no decline in performance All pump models are designed for use with an inlet air pressure of 20-100 PSI Air inlet threaded 1/4" NPT (F) Standard off the shelf pumps are available in a choice of 2 materials:(i) Aluminium body with a Hytrel* diaphragm. These can be used for all high temperature applications (ii) Polypropylene - body with(a) Santoprene Diaphragm - for use with abrasives, acids, caustic etc. (b) Teflon (PTFE) Diaphragm - for use with fluids such as solvents

TEMPERATURE RANGE FOR VARIOUS MATERIALS
BODY / CASING MATERIAL   LIQUID TEMPERATURE RANGE
Aluminium   0 to 100°C
Polypropylene   0 to 60°C
DIAPHRAGM MATERIAL   LIQUID TEMPERATURE RANGE
Hytrel® (TPEE)   0 to 80°C
Santoprene® (TPO)   0 to 90°C
Teflon® (PTFE)   0 to 100°C
View Complete Details

PTFE Packings

High FlexibilityConforming well to stuffing box conditions.
Less FrictionLess wear and less heat generation.
Better Heat TransmissionCooler operation.
Lower ShrinkageImproved sealability during operation.
Less RelaxationLess need for maintenance and/or repair.
View Complete Details

Air Compressors

Dual Material Construction Worlds only compressor with a unique dual material constructioni) The cylinder block is made up of cast iron that prevents wear & tear, thus imparting longevity to the unitii) Crankcase & cylinder head are made from aluminium Compact design and choice of aluminium as a raw material helps in efficient cooling of the unit. Aluminium crankcase keeps the oil in the sump cooler, thus enhancing the performance of the unit Efficient Ventilation Larger flywheel keeps air directed towards the cylinder for faster heat dissipation & efficient ventilation High pressure cylinder with higher temperature is positioned closer to the flywheel which also helps in faster cooling of the unit Output tubing designed to pass from the front of the flywheel, further reducing the temperature of the air in the tank In-Line Design Compact & superior to V type construction: air flow in the in-line design is directed towards both the cylinders uniformly keeping maximum temperature within check as compared to the V type construction where air flow is directed towards one side of the V at any given time Motor Class F insulation, motor is designed as per EURO norms Air Filter Easy to maintain & replaceable sponge type air filter is easily washable

CAT NR.   MOTOR RATING   AIR RECEIVER CAPACITY   BOX QTY.
RAC/3-21/150   2.2 KW,3HP   150 litres   1
RAC/3-21/150-1   2.2 KW,3HP (Single Phase)   150 litres   1
RAC/3-21/200   2.2 KW,3HP   200 litres   1
RAC/5.5-22/200   4 KW,5.5HP   200 litres   1
RAC7.5-22/270   5.5 KW, 7.5HP   270 litres   1
View Complete Details

PTFE Envelop Gaskets

  • Standard sizes ( inch ) ½’ , 3/4”, 1” , 1 ½’ , 2’ 2 ½”, 3”, 4”, 5”, 6”, 8”, 10”, 12”, 14”, 16”

Oval Gaskets for Manhole of Chemical Vessels. & Tanks.

View Complete Details

MOLDED ROD

  • Standard Diameter (mm): 3, 4, 5, 6, 7.2, 8, 9.5, 10, 11.2, 12, 12.5, 13, 14, 15, 16, 18, 19, 20, 22, 25, 28, 30, 32, 35, 38, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 95, 100
  • Standard Length -900, 1000
View Complete Details

PTFE Sheets

  • Standard Thickness (mm): 3, 4, 5, 6, 6.4, 8, 9.5 , 10, 12, 12.5, 12.7, 15, 16, 19, 20, 22, 25, 30, 32, 35, 40, 45, 50, 55, 60, 63, 65, 70, 75, 80, 90, 100
  • Standard Width x Length (mm): 300 x 300, 400 x 400, 450 x 450, 500x500 x 600x600 , 900 x900 , 1200 x 1200, 1500 x 1500
View Complete Details

Double-Jacketed Gaskets

TEADIT double-jacketed gaskets are particularly suited for applications like heat-exchangers and boilers. The gasket is constructed of a soft, heat resistant, non-asbestos filler material, which is completely enclosed in a two-piece metal jacket. When pass partition bars are required, we offer a welded pass bar construction. With a welded pass bar arrangement the fluid is retained by the primary seal at the inner diameter of the gasket. Thus the primary seal maintains its function, providing a seal of higher integrity. Material standardMetal jacket: carbon steel, soft iron, 304 (1.4301), 316L (1.4404)Filler material: graphite Many standard bar configurations are available, special configurations on request.

View Complete Details

Stand Up Rider

Features

  • 1.3 to 1.8 tonne capacity at 500 mm load center, lift heights up to 7 m
  • Large rubber tyres make it more tolerant to uneven flooring and outdoor usage as well
  • Needs about 10% less aisle widht than equivalent sit down rider forklifts
  • Maintenance free AC traction and steering motors, CAN-Bus technology and Access 1-2-3 comprehensive control system guarantee high energy efficiency and uptime, simplify maintenance
View Complete Details

Electric Stackers

Features

  • 1 to 1.8 tonne capacity at 600 mm load center; lift heights up to 5.23 m
  • WF/ST/SX 3000 series with integrated charger are designed for low throughput applications
  • Low profile and short length of battery compartment provides excellent visibility of fork tips
  • Heavy duty nested I-beam mast provides exceptional stability at height
  • Center mounted control handle makes stacker operation equally convenient for left and right handed op
View Complete Details

Selective Pallet Racking

Selective Pallet Racking is the simplest & economical racking system which allows 100% accessibility to each pallet. This racking is suitable for large variety of SKU's irrespective of quantity

View Complete Details

Tool Storage Cabinets

Fami Tool storage cabinets are the ideal storage solutions for proper storage of your shop floor tools. They not only help in proper storage of tools without mixing, thereby saving lot of time while on shop floor usage, the system gives total protection against pilferage. Several variants of tool storage cabinets are available with us with provision for pneumatic and electrical connections, back perforated boards for placing hand tools using suitable hooks.
View Complete Details

Drawing File Cabinet

Godrej Drawing File Cabinets have been designed specifically to store A1 to A5 sized documents safely and systematically. Drawing File Cabinets for A0 sizes are available on request. Architectural plans, engineering drawings, blueprints, charts, maps, artwork and other large drawings can be easily filed and instantly retrieved.
View Complete Details

Mobile Shelving

Godrej Mobile Shelving is an innovative space saving storage system with storage units mounted on mobile trolleys, thereby eliminating un-productive aisles. It has a simple and elegant construction with minimal maintenance and no service costs.
View Complete Details

Mobile Store Van

Store van is an innovative system with components imported from fami spa, italy to convert any commercial vehicle to a completely customised on/off road service vehicle. Internal components include workstations for repair or assembly works, storage cabinets for storage of tools/spares, anti-skid rubber mats to avoid movement and mixing of stored parts while driving the vehicle. Storevan designs are completely modular with no welding required to the vehicle body. Store van designs are crash test verified as per european regulations ece-r17 with impact at 50 km/hr. Store vans come with a warranty of 3 years.
View Complete Details

Sweepers

Features
  • Cylidrical broom sweeps up dust, dirt, debris from your floor
  • Patented Sweep Smart technology trabs dust as small as 0.5 micron in size (smaller than cigarette smoke particles)
  • Sweeps 2, 500 to 50, 000 sq.m. per hour; hopper capacity 80 to 2, 600 litre
  • Power source: Diesel / LPG / Battery
  • Indoor / outdoor operation, warehouse, factories, cement / steel / aluminium plants
View Complete Details

Scrubbers

  • For wet cleaning applications
  • Patented parabolic squeegee technology creates a virtually dry floor behind the machine
  • Scrubs 2, 500 to 7, 500 sq.m. per hour; tank capacity 40 to 300 litre
  • Power source: Battery / Disel / LPG
  • Cleaning of concrete or epoxy coated indoor flooring in automobile plants, warehouses, airports, pharmaceutical plants, retail stores, etc.
  • Option: Patented ec-H20 technology uses electrically charged water.
  • Eliminates need for detergent, reduces water consumption by 70% boosts productivity by 30%
View Complete Details

Sweeper Cum Scrubber

  • Integrated, simultaneous sweeping and scrubbing in one pass
  • Patented brush technology sweeps and scrubs simultaneously with the same set of brushes
  • Consumables expenses reduced by 30%
  • Cleans 5, 000 to 7, 500 sq.m. per hour; tank capacity 212 to 284 litre
  • Power source: Diesel / LPG / Batterry
  • Designed for large indoor areas like airpots, large warehouses, automobile plants, bottling plants, breweris, etc.
View Complete Details

Suction Sweepers

  • Use powerful air suction to pick up dust, dirt, leaves and litter from dry and wet roads. Also works on grass and foothpaths/kerbs
  • 3 stage cyclonic dust control system traps dust down to 3 micron size
  • Sweeps 7, 500 to 16, 000 sq.m. per hour; hopper capacity 284 to 1, 000 litre
  • Power Source: Diesel
  • Designed for large outdoor areas like company / university campus, sports complexes, lawns, stadiums, etc
View Complete Details

Electric Scissor Lifts

  • 5 - 12 m platform height
  • Full load capacity of the machine available on deck extensions
  • lndoor and outdoor application
  • Machine can travel with platform fully raised
  • Advanced electric components t to ensure low noise, high energy conservation and low level of pollution
View Complete Details

Diesel Scissor Lifts

Features

  • 12-15 m platform height
  • Full load capacity of the machine available on deck extensions
  • 4 wheel drive and 4 wheel steer for outdoor application
  • Stabilizers for use on uneven ground
View Complete Details

Compressed Asbestos Fibre Jointing

Compressed Asbestos Fibre Jointing is a consistently uniform, solid run constructed and resilient product, a price worthy quality of dependable performance. Its adaptability to many sealing requirement makes this jointing the most Economical sheet packing choice of plant Engineers and maintenance men for low service conditions. Red or Graphited finish.
View Complete Details

Ptfe Thread Seal Tape

Champion " PTFE Thread Sealant Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals. The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance.

" Champion " PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics.

Wind the tape by hand, using a constant minimal tension sufficient for the tape to take up the form of the thread. The tape should be wound in a helical fashion with a 50% overlap in the direction of the thread so that when the connection is completed the finishing end of the tape remains in position. The tape width should not exceed the length of the thread form.
View Complete Details

Easy Up Lift

  • Compact scissor lift With Working height of 5.2 m and 200 kg capacity (Single Person)
  • Available in both Manual traction and self Propelled versions
  • Can be driven through standard doorways and carried in passenger elevators
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us