Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

JM

J. M. D. Precision Equipments Private Limited
location Narayan Bagh, Indore, Madhya Pradesh

4.0/5
Call Now Call Now

Our Products

  1. Measuring Instruments & Equipment 10 Products available
  2. Testing Equipment 9 Products available
  3. Calibrators 6 Products available
  4. Clamps 5 Products available
  5. Analyzers And Analytical Instruments 3 Products available
  6. Garden & Outdoor Furniture 3 Products available
  7. Medical Accessories 2 Products available
  8. Laboratory Equipment 2 Products available
  9. Multimeter 2 Products available
  10. Photography Equipment 1 Products available
  11. Ohm Meter 1 Products available
  12. Medical And Industrial Gases 1 Products available
  13. Telecommunication Equipment & System 1 Products available
  14. Generators 1 Products available
  15. Electrical Panels & Distribution Box 1 Products available
  16. Medical Equipment & Supplies 1 Products available
  17. Others Products 4 Products available

Calibrators

We are leaders in the market for providing best range of Temperature Baths-Dry Block Calibrators, Digital Pressure Calibrators, Multi Function Calibrators, Pressure Calibrators and Marine Calibration Kits

Temperature Baths-Dry Block Calibrators

Temperature Baths-Dry Block Calibrators

The T-350P, T-650P and T-1200P models control temperature over an insert in order to calibrate thermocouples, thermo resistances, glass thermometers, thermo switches etc. Besides this, the T-1200P model comes with the function of black body target. Besides providing high accuracy temperature values, they also allow the measurement of signals generated by the thermocouples, thermor esistances and thermo switches, which are being calibrated. This possible due to an embedded calibrator specific for these types of signal, including 4-20 mA. They incorporate the function of dry block, standard thermometer and calibrator for RTD and TC sensors, besides mA reading. They present a wide range of programming resources, allowing them to perform automatic calibration of the sensors. In this case, the sensor is placed in the insert and its electrical terminals are connected to the embedded calibrator, the operator defines the calibration points and the number of repetitions, then the process is started so that all the sequence is automatically accomplished. Another way of performing automatic documented calibrations is by means of ISOPLAN calibration software for PC/Windows TM which uses the RS-232 serial port to connect PC to the dry block. With ISOPLAN it is possible to register sensors and instruments of the factory, generate work orders, create and print calibration certificates and reports, that is, it brings all the advantages of computer data management to the calibration environment.

View Complete Details
Ask Latest Price & Details
Digital Pressure Calibrators

Digital Pressure Calibrators
  • Item Code PC-507
Understanding the needs of various kinds of processes and requirements of various industrial needs, we have brought forth to our clients one of the most outstanding quality Digital Pressure Calibrators which is very much efficient and reliable in its use. We are one of the leading companies which are extensively engaged in the manufacture of a much wider comprehension of supreme quality Digital Pressure Calibrators.

Our Digital Pressure Calibrators are made up of very durable and strong quality raw materials and are available for our clients at a very commercial range of prices.

Features:

Affordable pricesDurable and long lastingCorrosion resistantReliable functionality
View Complete Details
Ask Latest Price & Details
Multi Function Calibrators

Multi Function Calibrators

Owing to our vast manufacturing facilities, we are able to offerMulti Function Calibrator. The MFT 4010 is a break-through combination calibrator / HART communicator that truly reduces the time spent on field calibrations. Our offered MFT 4010 Series deliver the versatility of a calibrator and the convenience of HART communications in one hand-held unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured by the NIST traceable MFT. The available modules include differential, gauge, vacuum and absolute pressure as well as temperature and voltage/current. A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled and trimmed using HART communications. Device Specific commands for supported devices are included with the MFT.

MFT 4010 Advantages:
All-in-one tool Takes the place of multiple hand held instruments, simplifies workload and improves productivity
Automation for HART field devices Calibration is automated through auto setup of the calibrator based on the device settings, digital trims automate the device adjustment steps
Calibration types supported Pressure, t/c, RTD, I/P, P/I, switch, loop and mA/V for conventional HART transmitter or local indicators
Document as found and as left calibration results Create calibration procedures on the hand held or download them from compatible device management software. Save results to non-volatile memory
Field updates Uses internet downloads to update and add capability /HART support
Modules Select from a variety of positive-lock measurement modules for excellent versatility
Field recertification Sensor modules and integral V/I can be recalibrated for zero, span and linearity via the MFT
User interface 2.1 x 2.1 display, four soft keys (definitions change with mode requirements) and eight hard keys provide user interface. Display is configurable for 1 to 4 simultaneous measurements.
User convenience Auto shut off, damping, min/max value capture, display hold, sensor zero, direct contrast adjustment
Security lockout Lockout specific MFT settings or all at one time
Diagnostics MFT 4010 self-tests upon power up and upon installation of sensor modules advisories are posted on the display
Dedicated DOF memory Memory for 500 HART device drivers
Measurement units Customary English and metric system units are selectable
Click on image to enlarge

View Complete Details
Ask Latest Price & Details
Pressure Calibrators

Pressure Calibrators
Item Code:PCA205M

ThePCA205Mkit is specially designed for maritime applications on-board ships.

Calibrate to justify adjustments or replacement of sensors. Connect the digital indicator PM205 to the hydraulic pump and you are ready to carry out calibration on board.

Range 0 - 300 barAccuracy 0, 2% FSTraceable certificateRugged construction, easy to use

View Complete Details
Ask Latest Price & Details
Marine Calibration Kits

Marine Calibration Kits
Manufacturer & Exporter of Marine Calibration Kits & Marine Calibrators for Temperature and Pressure. Our product range also comprises of Test Work Benches, Temperature Bath Dry Block Calibrators and Pressure Calibrators.
Temperature & Pressure Marine Calibrators

In January 1998, the International Safety Management (ISM) code was adopted by IMO and became mandatory for certain ocean going vessels.

Not later than July 1st 2002 the SOLAS Chapter IX and the ISM code applies to all ships, including mobile offshore drilling units.

The Marine Test Kit is supplied with a rugged case, traceable certificates and all necessary equipment to fulfill international regulations.

The kit can be configured to each type of vessels requirement for on board test and calibration equipment.

A world-wide service network assures that vessels will get full back up when complementing the test kit with new items and spare parts.

The Scan-Sense AS periodically calibration system will make vessels able to keep certificates updated at all times.


With our test case the vessel will have the necessary calibrated test equipment according to SOLAS (Safety Of Life At Sea).

We are also able to offer a periodically calibration system which helps the vessel to keep certified test equipment at any time.
View Complete Details
Ask Latest Price & Details
Lab Pressure Calibrators

Lab Pressure Calibrators
  • Item Code PM105
To satisfy our clients with all the required testing and measuring equipments, we are also available with one of the most excellent quality Lab Pressure Calibrators in our company. These Lab Pressure Calibrators are of very much use in a wide range of applications in various industries. Being one of the most trusted and reliable companies in the industry, we are providing these Lab Pressure Calibrators to our clients one of the most desirable and excellent quality testing and measuring equipments and at a very conventional range of prices. Our Lab Pressure Calibrators are widely used and appreciated in several regions of the country.

Features:

Tough and tensileEasy to install and useConvenient operationsCost efficient

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.